[12-15-09]Android CDMA TouchPro: TEXT, TALK, data and wifi(RAPH800) Ported!!! - Page 45

basilray · #**441** (**permalink**) 12-10-2009, 12:57 PM

Quote:

Originally Posted by catfishk

WiFi and CDMA radio are working on my RAPH800. i haven't gotten CDMA data yet, but i am on Cricket and they use a proxy on port 8080. thanks Makonnen!

your STARTUP.TXT should have the carriers APN info included, according to here

this rules! i love my, albeit buggy, Android phone

Anyone got this infor for Sprint? It doesn't seem to be listed on the linked pages of carrier info.

**makkonen** · #**442** (**permalink**) 12-10-2009, 01:01 PM

None of it is necessary for Sprint.

neugroove · #**443** (**permalink**) 12-10-2009, 05:29 PM

Quote:

Originally Posted by agentmikeyd

I was able to load mrpippys zimage on my diamond. the basic fumctions work but no data and screen taps are off. can use dpad for most. perhaps makonnen or som er one can use mrpippys zimage from connect utb and enhance....

Can you post your startup por favor?

catfishk · #**444** (**permalink**) 12-10-2009, 06:13 PM

nothing i can do to the STARTUP.TXT will allow for Cricket connections, i am convinced. ppp0 does not appear in ifconfig... ever

/dev/smd0 exists (modem, right?). setupmodem.sh is running

$cat /smodem/ppp.log:

Turning on Data
Done!
PPP connection went down
Done!

i don't think the APN settings in Android are for CDMA, but only GSM phones, since it's an old version prior to CDMA support

agentmikeyd · #**445** (**permalink**) 12-10-2009, 08:59 PM

Quote:

Originally Posted by neugroove

Can you post your startup por favor?

set ramsize 0x6000000
set ramaddr 0x10000000
set mtype 1910
set KERNEL zImage
set initrd initrd.gz
set cmdline "root=/dev/ram0 init=/ console=tty0 mem=76M msmsdcc_id=3 zmgdevname=/dev/mmcblk0p1 imgdevnum=1 imgdir=/ msmts_calib=0x7a.0x5e.0x35a.0x37f clock-7x00.a11=500 msmvkeyb_toggle=off"
boot

if it works, for you too let me know - i found you have to click at the opposite end from the target... or just use the d-pad.

**makkonen** · #**446** (**permalink**) 12-11-2009, 10:42 AM

Quote:

Originally Posted by catfishk

nothing i can do to the STARTUP.TXT will allow for Cricket connections, i am convinced. ppp0 does not appear in ifconfig... ever

/dev/smd0 exists (modem, right?). setupmodem.sh is running

$cat /smodem/ppp.log:

Turning on Data
Done!
PPP connection went down
Done!

i don't think the APN settings in Android are for CDMA, but only GSM phones, since it's an old version prior to CDMA support

/dev/smd0 is the radio (i.e. the AT channel -- dials, sends/receives SMS, gets signal strength from the towers... not sure if it also carries voice). /dev/smd1 is the modem. If you're getting an error about no device on smd1, you won't get data. But I doubt that's your problem.

I also don't think the APN settings have an effect on CDMA. It's quite possible that the ppp settings for cdma in the RIL (Radio Interface Layer) that has been coded for HTC WinMo -> Android devices is not properly handling ppp authentication. If you have a desire to get your hands dirty, catch me on irc or the wave sometime and I can explain to you how to boot into angstrom (a command line distro) and test the ppp connection without the confounding variables of Android.

Speaking of the wave, I'm trying to move the majority of my interaction on this topic onto Google Wave, because (a) it's neat, (b) it means, ideally, not having to reply in 3 different forums. The Android on HTC Devices wave is where I'm putting my effort. Hopefully that link works. If anyone needs a google wave invite, I've got plenty; just PM me.