Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Thanks man! :-P

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Thanks JooJoo! :)
Please, may you share the old style files for old kitchen for:

- VGA -0409-DPI-192-RESH-480-RESV-640

and

- QVGA -0409-DPI-96-RESH-240-RESV-320

Cheers,
Erick

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Thank you JooJoo! :smile:
But my Apache all the same has not booted (((

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Ok, thanks. I'm looking into it ;).

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Is there a reg setting that will start Internet Sharing in the Connected mode when I launch Internet Sharing?

? my touch screen doesn't work so I need it to load and start at the same time.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Hello Fellows!

Somebody could, please, to share Please, the old style files for old kitchen for:

- VGA -0409-DPI-192-RESH-480-RESV-640

and

- QVGA -0409-DPI-96-RESH-240-RESV-320

Thanks!
Erick

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Ok, got some Apache common files up, give those a go.

http://forum.ppcgeeks.com/showthread...78#post1253878

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Hey JooJoo!

Could you, please, to share the old style files for old kitchen for:

- VGA -0409-DPI-192-RESH-480-RESV-640

and

- QVGA -0409-DPI-96-RESH-240-RESV-320

Thanks!
Erick

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Thought i posted this Q already but couldn't find it. But can anyone shine some light on icons here. I'm trying to get updated nice qvga set but with original small wm6.5 wait cursor, unless someone has a better suggestion for wait cursor, as opposed to this huge one I put in there. Problem is, when extracting the bitmaps from an "original" dll, they come out 80x80. Is this not an original or do i need to resize each bitmap. If so, which size will look regular?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Or give him a tutorial on how to convert them so he doesn't have to ask 3 times an hour

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I sent him a PM a while ago letting him know that the files from ther-amm are pretty much ready to go, and that you will just need to put the right files all under the same folder. I don't have time right now to do all of that and upload them.

But for clarification and for everyone else, for VGA, extract all the folders in the COMMON, the COMMON-0409, VGA-0409 and VGA-COMMON all to the same folder, name it SYS, and there ya go. As far as the QVGA, its the same, just use the QVGA instead of VGA. ;)

Any question, just let me know. :D

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Yep, now it boot fine :thumbright: Thanks for your work, JooJoo =D>

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Anyone Have The MSXIPKernal for 23075?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Great, thanks for the feedback :).

Posted them here earlier. -> http://forum.ppcgeeks.com/showpost.p...postcount=8518

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Just letting everyone know that everything seems to be working well with my QVGA Vogue!

Thanks again!

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Yes here on my elfin 23075 works really good. In 0C0A lang too with the 21071 ones.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Nothing for QVGA 128DPI?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Well it looks like the non wake issue has been resolved. It is called build number 23075. lol

This system is working well.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I still get the REPLY icon when I create a new message with the 23075 rom. The first message had the SEND icon but all messages since then have the REPLY. When I press the REPLY it generates a new RE message with a SEND icon.

So for I have not had to reset the device.

Sprint Vogue 23075 - PPCK

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

So far every thing is good on htc elf (with a lite rom ), stable, fast , no sleep issue However the magnifier icon in task bar in skreen shots linked few posts earlier is missing

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Here is your fix!

[HKEY_LOCAL_MACHINE\SYSTEM\GWE\MAGNIFIER]
"Enable"=dword:1
"MagnifierConstant"=dword:c8
"BILINEAR"=dword:1

Most people have this turned off by default...

Have fun!

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Thank you for quick reply in fact i rarely use it but i was afraid that i missed something during cooking:laughing6:

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Is there a reg setting that will start Internet Sharing in the Connected mode when I launch Internet Sharing?

? my touch screen doesn't work so I need it to load and start at the same time.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Hi, Is ppc kitchen different from ervius visual kitchen , Do we need to fix the attributes for visual kitchen ,Also do we need to port xip for ervius kitchen?
Please also guide me as how to organise sys components like common and dpi files/folders in bepes platform builder kitchen and also for ervius visual kitchen .Thanks .

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Hey, sorry to sound like an *** -- but I managed to just view the files -- look at similar naming conventions and move as necessary... Than I did a test build, and voila! It worked flawlessly...

I think some good ole trial and error might be your best bet at first :)
http://lifehacker.com/5386722/get-it...earn-it-better

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

The SYS files in ervius are separated by common, lang, and DPI in the following way:

SYS
--XXXXX (build number, i.e. 21075)
----DPI_XXX (where XXX = device DPI like 96, 192 or 128 )
--------0409 - *_Lang_0409_DPI_XXX
--------COMMON - *_DPI_XXX
----DPI_dpi_XXX_resh_YYY_resv_ZZZ (where YYY and ZZZ = screen res, i.e. 480x640, oe 240x320)
--------0409 - *_0409_DPI_XXX_RESH_YYY_RESV_ZZZ
--------COMMON - *_dpi_XXX_resh_YYY_resv_ZZZ
----SHARED
--------0409 - *_Lang_0409
--------COMMON - Common packages (i.e. packages with no DPI, or 0409 in the name)

The MSXIPKernel can be obtained from the XIP by dumping it with XIPport.exe (rename xip to xip.bin). After dumping, do a make packages. Once done, you will be left with the following layout in the OUT folder:

FILES
--MSXIPKernel
--OEMXIPKernl
MODULES
--MSXIPKernel
--OEMXIPKernel

To use these files from the xip in ervius, move them to the following folders:

ROM
--DEVICE (Where this folder will be named Herman, or Raphael, or whatevever)
----XXXXX (where XXXXX is the build number, i.e 23075)
------OEMXIPKernel - Contains all the files and folders under BOTH OEMXIPkernel folders from above, MINUS the .txt files
--SHARED
----XXXXX (where XXXXX is the build number again)
------MSXIPKernel - Contains all files and folder from both MSXIPKernel folder from above, MINUS the txt files. Alternatively, just grab a copy of the files that some posted as usually, someone posts the MSXIPKernel separately for the builds when they come.

Mind you, the MSXIPKernel file are the ones that change from build to build, so those need to match the build you are building for, but the OEMXIPKernel are device specific and can be copied from build to build.

Also, you will need an os.nb.payload and romhdr.bin for your device placed into the ROM\Device folder.

The removed packages from my PPCK files post can be added following the guidelines from above, and don't forget to fix the file permissions. ;-)

Hopefully I didn't miss anything. :p

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

@joojoobee666 ,
Thank you very much for helping me,
So then If I have MSXIPKernal for some device say Raphael, I can use it for some other HTC devices like elf,hermes ?Do I still need to port it or just put it in the appropriate folder inside the kitchen? Also for ervius visual kitchen ,do I need to fix attributes ?.Sorry,I have been a trouble.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Is there a 128DPI release for 23075?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

No need to "port" the MSXIPKernel if used in ervius, assuming that you are saying that you pulled the MSXIPKernel files from the xip of another device that was the same build. Just put in into the kitchen.

And you ONLY need to fix attributes if you use the PPCKitchen files for your ervius kitchen.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Thank you again, joojoobee & all others who make these files available to all of us. Regarding 23075, it might be my test unit, but has any one else had any issues with the hardware keyboard double striking some of the keys? This is on the 6800. I think I recall a discution earlier in this thread, but I don't know how many hundred pages back. For now I will flash another unit with the same ROM and see what happens.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Anyone sync to an exchange server? I am having a strange issue where the "from" field is blank. Strange thing is when you open the message there is no "from" line and you can not reply to it. There are even several email with no subject lines in them. I have to say I have never seen this before. My yahoo mail looks and works great.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

You are not alone, apparently. There have been quite a few reports of the same issue over at XDA all revolving around Exchange Activesync ans 23075. As of yet, there is no fix.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Yeah here too...

Is anyone else having trouble with random reboots during phone calls?
Everytime I make or receive a call I can talk until I hit a button. Then the phone freezes and once the call is ended it resets...

I'm trying a new ROM with out a few OEM's that people have had trouble with in the past, I will report the results...

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Not sure, and this is off topic, but I'm guessing that it's gonna be one of these:

[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"Device_Type"=dword:00000002
"AskConnect"=dword:00000001
"SyncMode"=dword:00000000
"EnableAdvanceChecked"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"AskConnect"=dword:00000001

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

No luck, it still starts in non-connected mode. Since this is off topic for this thread, where should I post this question for best results?

Thanks for your help.

FT

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Hi mate Don't know if this will help!! But with older devices like blue angel. we had probs with remote sync and someone patched the coredll.dll and it fixed the prob, If it will help I can upload unpatched and a patched coredll.dll's if someone has the skill to do something with them,
regards
swampy395

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Take syncmgr.dll from 23071 and put it in your 23075 :)

From what I've read, it fixes Exchange issues.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

To solve my exhange and SEND button problems I had to go back to 23053. I tried 23071, 69, 64, 50 and 420.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Ya no biggie. Flashed 23069 since it worked so well for me. ;)