Mattsm TITAN Builds

[mattsm]

Thanks to all of you helping today. I will go back and hit your thanks button. I am sorry that I am behind but I am just now downloading 23004 files so bear with me. I hope to get a release tonite but no promises(If not tonite then tomorrow for sure.)I have been extremly busy(at my business) and I want to make sure issues are solved. I still need to finish reading thread for any issue that I do not know about yet.

[cac2us]

Originally Posted by mattsm

Thanks to all of you helping today. I will go back and hit your thanks button. I am sorry that I am behind but I am just now downloading 23004 files so bear with me. I hope to get a release tonite but no promises(If not tonite then tomorrow for sure.)I have been extremly busy(at my business) and I want to make sure issues are solved. I still need to finish reading thread for any issue that I do not know about yet.

Busy is good for job security.

[linkboy321]

Originally Posted by cac2us

What carrier do you plan on using?

Sounds like your with Sprint. If not just run a carrier cab for your carrier.

No, I'm with Verizon (don't have Sprint up here in Montana. All we have is Verizon and Alltel, with AT&T replacing Alltel when the merger goes through). My old roommate moved to Florida and switched to Sprint from Verizon.

Anyways, I flashed it using 23003 rom and it worked and I can still make phone calls (called my parents to test).

Now I just have to get used to WM 6.5.

mattsm, thank's for this rom.

[naejae730]

Originally Posted by cac2us

Sounds like an EVDO thing.
Is it Verizon Wireless Sync site?

The Ev icon is showing up at the top. Yes, it's coming from the Verizon W Sync site. I installed the cab to try to get my contacts back earlier this afternoon. Any ideas?

Also wanted to note that when I installed mattsm's latest ROM out it said that I didn't need to install the carrier cab if I had Verizon so I didn't. Just wanted to point out that my IE homepage was set to a Sprint page and when it shows up that it's dialing #777 it says Sprint. Do I need the carrier cab after all?

[btonetbone]

Originally Posted by naejae730

The Ev icon is showing up at the top. Yes, it's coming from the Verizon W Sync site. I installed the cab to try to get my contacts back earlier this afternoon. Any ideas?

Also wanted to note that when I installed mattsm's latest ROM out it said that I didn't need to install the carrier cab if I had Verizon so I didn't. Just wanted to point out that my IE homepage was set to a Sprint page and when it shows up that it's dialing #777 it says Sprint. Do I need the carrier cab after all?

Yes, you should install your carrier cab. Mattsm builds for Spint as default (his carrier) and the cab will over-write those settings. You'll still have the Sprint homepage, but it'll make your connection use Verizon standards.

[cac2us]

Originally Posted by naejae730

The Ev icon is showing up at the top. Yes, it's coming from the Verizon W Sync site. I installed the cab to try to get my contacts back earlier this afternoon. Any ideas?

Also wanted to note that when I installed mattsm's latest ROM out it said that I didn't need to install the carrier cab if I had Verizon so I didn't. Just wanted to point out that my IE homepage was set to a Sprint page and when it shows up that it's dialing #777 it says Sprint. Do I need the carrier cab after all?

It would'nt hurt to run the carrier cab.
Then double check the settings in:
"Start/Settings/Connections/Cannections/General(at the bottom), and make sure it says "Verizon Wireless".
If not, Deleet Settings.
If it does say Verizon Wireless, then tap "Modem"
Select "Data Network Connect", tap edit, make sure it says "Celluar Line" for Modem.
Tap next, see #777, Next, and enter your#@vzw3g.com, (User Name) VZW, (Password), then finish.
Not too long ago, a level 3 tech at VZW had me enter "BroadBandAccess", instead of "Data Network Connect". The reason was that my username & password would dissapear. That fixed that.
So now I keep both of them on there, and swich now and then.
Hope it helps.

[mattsm]

Originally Posted by DAL_MOBILE

BlueTooth controls (fwd, rev, vol, pause) for Windows Mobile Media Player do not work with 23003 Sprint. (BT ctrls did work on 23001b). Anyone else have this issue?

This needs testing on this build. I will post the bare bones tomorrow morning sometime.
This has reply to all fix and some others.
Check out the media center in programs.(Tplane37 made us that oem)


23004 Sprint

good nite and see ya in the a.m.

[Grizzly_Addams]

**WARNING**

I could not make an emergency phone call from my phone using the ROM! (23003)

I flashed this ROM to my phone earlier today. I was driving down a street in my city about 20 minutes ago and p a s s e d (sorry, forum filtering edited out the real word!) by a building on fire. Noone else was nearby and I attempted to dial 911, but instead of entering emergency mode and calling 911, the phone froze for about 90 seconds before kicking me out of the dialer. Even after soft resetting twice, I was still unable to place an emergency phone call. Luckily after about 5 minutes another person came by and was able to call in to report the fire. But 5 minutes can be a lifetime (or a life!) in an emergency.

I did not make *any* changes to the ROM. Like I said, I had just flashed it earlier, and did not even change any preferences in the settings menus! Not even so much as the theme. Of course I was able to place a normal phone call, which is obviously all I had tested at that point.

So I don't know if it's the dialer, or the build, or if any other wm6.5 chefs have even tried to place an emergency call with a recent build, but I would say it's worth looking in to.

[mattsm]

Originally Posted by Grizzly_Addams

**WARNING**

I could not make an emergency phone call from my phone using the ROM! (23003)

I flashed this ROM to my phone earlier today. I was driving down a street in my city about 20 minutes ago and p a s s e d (sorry, forum filtering edited out the real word!) by a building on fire. Noone else was nearby and I attempted to dial 911, but instead of entering emergency mode and calling 911, the phone froze for about 90 seconds before kicking me out of the dialer. Even after soft resetting twice, I was still unable to place an emergency phone call. Luckily after about 5 minutes another person came by and was able to call in to report the fire. But 5 minutes can be a lifetime (or a life!) in an emergency.

I did not make *any* changes to the ROM. Like I said, I had just flashed it earlier, and did not even change any preferences in the settings menus! Not even so much as the theme. Of course I was able to place a normal phone call, which is obviously all I had tested at that point.

So I don't know if it's the dialer, or the build, or if any other wm6.5 chefs have even tried to place an emergency call with a recent build, but I would say it's worth looking in to.

This is something I personally tested but not with any of the current releases.
The problem is that when you place a 911 call it does not dial like another number would. Before it connects with any dispatcher, the cell tower will attempt to get a gps lock on the device causing a lag of up to 3 min. Makes you think that the device is locked up(I reset the device 3 times during the test cause I thought it was locked up). It will close the dialer and all but then make the connection. This is not a good design. I was getting ancious just testing this. But I will test this again cause it is something that needs to work. I had tested this before in February or March.(tested with 6.1 and 6.5)

Thank you.

WIll test this again over the weekend. I am real good friends with the system here.

[naejae730]

Originally Posted by cac2us

It would'nt hurt to run the carrier cab.
Then double check the settings in:
"Start/Settings/Connections/Cannections/General(at the bottom), and make sure it says "Verizon Wireless".
If not, Deleet Settings.
If it does say Verizon Wireless, then tap "Modem"
Select "Data Network Connect", tap edit, make sure it says "Celluar Line" for Modem.
Tap next, see #777, Next, and enter your#@vzw3g.com, (User Name) VZW, (Password), then finish.
Not too long ago, a level 3 tech at VZW had me enter "BroadBandAccess", instead of "Data Network Connect". The reason was that my username & password would dissapear. That fixed that.
So now I keep both of them on there, and swich now and then.
Hope it helps.

Cool. I will try this. Know where I might get the carrier cab for Verizon? I could have sworn I saw it in this thread somewhere but after a search I can't seem to locate it. Perhaps it was on the first post and it was removed?? I did notice the carrier cab info had been updated.

*I definitely need the carrier cab. Just took a quick peek into the Connection settings and everything does say Sprint*