Make NueRom Unified Kitchen's work in new build os for existing NueRom kitchen users

[mikee4fun]

Originally Posted by beaseac

I tried this fix but can not get it to work... apparently the PPCKitchen has been upgraded to .09.04... how can I get the nueRom to work with the new buildos?

For the new build os .9.05 Replace the kitchen_config.txt file in your
C:\Program Files (x86)\PPCkitchen.org\BuildOS\Kitchens\NueRom\no2ch em_Titan_Core

Overwrite it and it should work. It should look like the following.

KitchenConfigVersion=.90.04

RGUOrder=ModuleOrder

Kitchen=nueROM3_Titan
KitchenVersion=v3.00

KitchenROMDeviceType=Titan
KitchenROMOSType=WM6.1

RomDir=ROM
ModuleDir=SYS
BuildID=No2Chem_nueROM3
XipFilename=Titan,No2Chem_nueROM3,xip_patch_20931. bin

UnselectedItemBackColor1=0
UnselectedItemBackColor2=0
SelectedItemBackColor1=00000000
SelectedItemBackColor2=00000000
ExcludedItemBackColor1=00000000
ExcludedItemBackColor2=00000000
RequiredItemBackColor1=00000000
RequiredItemBackColor2=00000000
BackgroundColor=FFFFFFFF
BackgroundImage=titan.png
FontColor=FF000000

DefaultSelections=nueROM3_selections.txt




Thanks to GGURU and MikeyRoms for the additional help

[dishe]

Hmm... even with this, I haven't gotten it to work. I spoke to GGuru for a while about it, and tried leaving all options as default when building, but it still threw some errors when loading (some xml error, failed to find sprint carrier stuff, etc), and after flashing it fails to boot past the splash screen.
Some other folks in the chat tried to figure this out together with me, and we seem to run into the same problems- so far none of us have gotten this sucker to boot, and we always get suspicious errors when loading the selections (probably related).

Mikee, have you gotten this to work from scratch? Perhaps you should re-articulate the steps in more detail, because some of us are not having the same results as you. I'm not sure where the discrepancy is.

How about this- Don't assume we've had the previous no2chem kitchens running, but someone who wants to run the new 206 basekit in the new BuildOS for the first time. I think a lot of Titan users are trying nueRom's kitchen for the first time now because of the camera/memory mode option. It took me a few minutes before I realized where all the files were supposed to be unpacked to...

Originally Posted by mikee4fun

For the new build os .9.05 Replace the kitchen_config.txt file in your
C:\Program Files (x86)\PPCkitchen.org\BuildOS\Kitchens\NueRom\no2ch em_Titan_Core

Overwrite it and it should work. It should look like the following.

KitchenConfigVersion=.90.04

RGUOrder=ModuleOrder

Kitchen=nueROM3_Titan
KitchenVersion=v3.00

KitchenROMDeviceType=Titan
KitchenROMOSType=WM6.1

RomDir=ROM
ModuleDir=SYS
BuildID=No2Chem_nueROM3
XipFilename=Titan,No2Chem_nueROM3,xip_patch_20931. bin

UnselectedItemBackColor1=0
UnselectedItemBackColor2=0
SelectedItemBackColor1=00000000
SelectedItemBackColor2=00000000
ExcludedItemBackColor1=00000000
ExcludedItemBackColor2=00000000
RequiredItemBackColor1=00000000
RequiredItemBackColor2=00000000
BackgroundColor=FFFFFFFF
BackgroundImage=titan.png
FontColor=FF000000

DefaultSelections=nueROM3_selections.txt




Thanks to GGURU and MikeyRoms for the additional help

[lilk1d777]

like the previous poster i am also stuck at the boot up splash screen.....

[mikee4fun]

Originally Posted by dishe

Hmm... even with this, I haven't gotten it to work. I spoke to GGuru for a while about it, and tried leaving all options as default when building, but it still threw some errors when loading (some xml error, failed to find sprint carrier stuff, etc), and after flashing it fails to boot past the splash screen.
Some other folks in the chat tried to figure this out together with me, and we seem to run into the same problems- so far none of us have gotten this sucker to boot, and we always get suspicious errors when loading the selections (probably related).

Mikee, have you gotten this to work from scratch? Perhaps you should re-articulate the steps in more detail, because some of us are not having the same results as you. I'm not sure where the discrepancy is.

How about this- Don't assume we've had the previous no2chem kitchens running, but someone who wants to run the new 206 basekit in the new BuildOS for the first time. I think a lot of Titan users are trying nueRom's kitchen for the first time now because of the camera/memory mode option. It took me a few minutes before I realized where all the files were supposed to be unpacked to...

This post was not intended for new users of NueRom kitchen. I updated the title. When I get a chance I will make a new thread for New users for NueRom kitchen. Why don't you use my selections above which I posted here below. You may have some other errors for duplicate oem's but just click ok on through. If you do not want duplicate oem errors, for windows llive, remotedesktop, and one notes. Go into the PPCkitchen_OEM.rar and delete them. Next time you update kitchen files you may need to go back into PPCkitchen_OEM.rar and re delete the oem's again. I also provided what should be a clean selections as well. I am in a rush this morning but they should both be booting selections. Please let me know your results.

Cheers,

Mikee

[dishe]

Originally Posted by mikee4fun

This post was not intended for new users of NueRom kitchen. I updated the title. When I get a chance I will make a new thread for New users for NueRom kitchen. Why don't you use my selections above which I posted here below. You may have some other errors for duplicate oem's but just click ok on through. If you do not want duplicate oem errors, for windows llive, remotedesktop, and one notes. Go into the PPCkitchen_OEM.rar and delete them. Next time you update kitchen files you may need to go back into PPCkitchen_OEM.rar and re delete the oem's again. I also provided what should be a clean selections as well. I am in a rush this morning but they should both be booting selections. Please let me know your results.

Cheers,

Mikee

Duplicate OEMs I'm not worried about. I have many of my own versions of oems that overwrite files all the time (I could remove the originals, but everytime the kitchen oems update I'd have to do it again). I'm aware those are harmless.
Its the other errors that seem more serious (I'll post the exact syntax of the error when I'm back home in front of it), and seem to prevent it from building a properly booting rom (something about carrier OEM and xml error).

I believe that I tried your settings first, and when it didn't work, consulted GGuru. Gave up after a couple of hours without a working rom.

I'll try your selections again tonight. Looking forward to making this work...

[mikee4fun]

Originally Posted by dishe

Duplicate OEMs I'm not worried about. I have many of my own versions of oems that overwrite files all the time (I could remove the originals, but everytime the kitchen oems update I'd have to do it again). I'm aware those are harmless.
Its the other errors that seem more serious (I'll post the exact syntax of the error when I'm back home in front of it), and seem to prevent it from building a properly booting rom (something about carrier OEM and xml error).

I believe that I tried your settings first, and when it didn't work, consulted GGuru. Gave up after a couple of hours without a working rom.

I'll try your selections again tonight. Looking forward to making this work...

Dishe, I believe that is the bad sprint carrier oem. Delete the existing sprint carrier oem in the NueRom Unified Kitchen and replace it with the one I attached in the first post. Don't overwrite it. Delete the existing one and then copy the attached one over. After that you should not get that error. Getting this kitchen to work has been very frustrating, but I now have no issues. If you still have issues PM me and I will get you up and rolling.

Cheers,

Mikee

[lilk1d777]

UGH thought i was so close but i got a

ERROR [270]: UPDATE ERROR

after running RUU =( sigh what does that mean !?!?!

[mikee4fun]

Originally Posted by lilk1d777

UGH thought i was so close but i got a

ERROR [270]: UPDATE ERROR

after running RUU =( sigh what does that mean !?!?!

Try flashing from the bootloader with a non sdhc card. Go to your documents folder and go to the build os ruu folder. Rename the Ruu_signed nbf file to TITAIMG.nbh and copy it over to your microsd card. Now put the phone into the bootloader (Power,camera, and soft reset) and wait for it to say checking. Then press the power button and it will update. When done, use the stylus to reboot out of update bootloader. When it boots listen phone the boot sound. If you don't here it you don't have a booter and you need to re cook and re flash. I only flash from the microsd card so I hope this helps.

Cheers,

Mikee