Could use a little help...stuck in bootloader :(

[Chapbass]

Okkkayyy, so after messing around with stuff maybe a little more than I shouldve, my xv6800 (Verizon) is stuck on the tricolor bootloader screen. It loads this regardless of what type of reset i do (bootloader, soft, hard).

windows DOES see it (im on vista), but it only sees it as a microsoft USB Sync device, not an xv6800.

The 3 lines say: Tita100, SPL-2.07.0000, CPLD-9


If i try putting the TITAIMG.nbh file on my microsd card, it flashes the tri-color bootloader, says Loading in gray, and just sits there.


Any ideas? Thanks in advance

[SBR_L3GION]

flash the official verizon titan ROM found here.

http://forum.ppcgeeks.com/showthread.php?t=21953

[Chapbass]

Sweet, thanks for the reply. OKAY! ive loaded up DCD's WM 6.1 rom. I can boot into WM 6.1 just fine now.


Now for the tricky part....i cant dial out :O

I've been following http://forum.ppcgeeks.com/showthread...installing+cab that thread, and im to the point where it says to dial ##MSL#, but when I do that it just dials a verizon wireless number that says it wants to connect me to a representative.

Should I talk with verizon? The number on my phone under settings is all messed up as well. If try to dial ##778 like i did before flashing, the screen goes white for about half a second and brings me back to the dialer.

Sorry for getting stuck again, dunno where to procede from here

[Chapbass]

Okay, so dont ask me why i started messing with it again, but after flashing the stock rom and then flashing to no2chem v. 5076 (i did the olipro unlocker), now when I boot it up, it goes to where you align your screen, but if i tap it a few times to align it, it will auto soft reset. If i let it sit however, it will stay on.


Any thoughts? Thanks all

[jason25]

take the battery out for about 10 seconds, then hard reset.

The reason you started messing with it again after you got it fixed is why you are perfect for this site. Do you know how many times many of us have had our device setup the way we wanted and flashed something else just to go back where we started?!

[Chapbass]

hmmm, tried that, still does it. Turns out it does it even if i dont touch anything. Happens after ~30 seconds of sitting at the green "windows mobile 6.1, click here to setup" screen. Maybe it was just a bad flash?

[Chapbass]

Alright, i fixed it! turns out it mustve been an incompatibility with some of the addins i had on there.


One final problem and im done (even got the phone dialing out ). When i go to turn on Wifi, it looks like its going to turn on, then nothing. It wont find any access points either. Anything I should be looking for?

[Chapbass]

Never mind, got it all figured out, i think im golden! mods, feel free to close/lock the thread if thats what happens around these forums

thanks for the info, legion and jason.