nueROM 2.2 Bleeding Edge General Discussion Thread

[flyers2114]

NO2Chem,

Any help on the MSVC BT issue.....MSVC works but not via BT....then I installed the basekit and now it says no BT hardware

[zadok]

Originally Posted by flyers2114

This did not work for me I tried it thinking the same thing when I first flashed the rom.....please post your steps in case I missed something....did you delete the whole folder or just the OEMAGW application?

Here's what I did. Please forgive the noobness. I can only guess as to why this worked. Even a blind squirrel gets a nut now and then...


-- Update your PPCKitchen_OEM.rar --

1) I started over by deleting ALL of the NueROM3 subfolders folders in the kitchen, and copied them into the Kitchen again from the NueROM rar. (see attached jpeg)

2) Extracted all the apps with Winrar from PPCKitchen_OEM.rar

3) Deleted the apps I had in USER_OEM. THEN, copied the app subfolders to USER_OEM in the Kitchen (see attached jpeg) -- note that I'm using Vista... Again, starting from scratch...

4) Connected device via USB and Allowed ActiveSync to do its thing.

5) Started PPCKitchen

6) Opened the NueROM3_Selections.txt

7) Selected the stuff I wanted -- including both Voice Command

8.. Allowed the build to go -- I received errors on the chess app, AND both Voice Command after doing this twice -- did not delete the stuff from temp folder between tries.

9) The phone started - and curiously it started the Sprint setup, even tho I had selected VZW -- the files weren't there, so I just did a soft reset cause the Sprint stuff froze it.

10) Once restarted, I found that Voice Command was NOT in the personal "Settings," found after I clicked on it from the main start menu.

11) I installed Resco reg editor, and looked in to the HKLM\SOFTWARE\OEM\VoiceCommand\ LO AND BEHOLD the "Path" item was missing!

12) I created the Path entry and created the value "\Program Files\Voice Command\voicecmd.exe -- IT STUCK!

13) Installed my registered MSVC from the PC by activating the exe file and following the instructions to install on the Titan -- INSTALL TO DEVICE

14) I followed the forum.xda linked-text to ensure that --

To check your audio gateway:

1. Goto HKLM\Software\Microsoft\Bluetooth\AudioGateway
2. Ensure BTAGExtModule is set to “\Windows\vcbthag.dll” or “\Program Files\Voice Command\vcbthag.dll” (or another location depending on where your MSVC files are located).
3. SOFT RESET the phone
4. Wait about 60 seconds after restart to ensure all services are started

You should now be able to use your BT headset to initiate the audio gateway and initialize Voice Command.

After that BT commands via earpiece button were no prob!

[flyers2114]

Originally Posted by zadok

Here's what I did. Please forgive the noobness. I can only guess as to why this worked. Even a blind squirrel gets a nut now and then...


-- Update your PPCKitchen_OEM.rar --

1) I started over by deleting ALL of the NueROM3 subfolders folders in the kitchen, and copied them into the Kitchen again from the NueROM rar. (see attached jpeg)

2) Extracted all the apps with Winrar from PPCKitchen_OEM.rar

3) Deleted the apps I had in USER_OEM. THEN, copied the app subfolders to USER_OEM in the Kitchen (see attached jpeg) -- note that I'm using Vista... Again, starting from scratch...

4) Connected device via USB and Allowed ActiveSync to do its thing.

5) Started PPCKitchen

6) Opened the NueROM3_Selections.txt

7) Selected the stuff I wanted -- including both Voice Command

8.. Allowed the build to go -- I received errors on the chess app, AND both Voice Command after doing this twice -- did not delete the stuff from temp folder between tries.

9) The phone started - and curiously it started the Sprint setup, even tho I had selected VZW -- the files weren't there, so I just did a soft reset cause the Sprint stuff froze it.

10) Once restarted, I found that Voice Command was NOT in the personal "Settings," found after I clicked on it from the main start menu.

11) I installed Resco reg editor, and looked in to the HKLM\SOFTWARE\OEM\VoiceCommand\ LO AND BEHOLD the "Path" item was missing!

12) I created the Path entry and created the value "\Program Files\Voice Command\voicecmd.exe -- IT STUCK!

13) Installed my registered MSVC from the PC by activating the exe file and following the instructions to install on the Titan -- INSTALL TO DEVICE

14) I followed the forum.xda linked-text to ensure that --

To check your audio gateway:

1. Goto HKLM\Software\Microsoft\Bluetooth\AudioGateway
2. Ensure BTAGExtModule is set to “\Windows\vcbthag.dll” or “\Program Files\Voice Command\vcbthag.dll” (or another location depending on where your MSVC files are located).
3. SOFT RESET the phone
4. Wait about 60 seconds after restart to ensure all services are started

You should now be able to use your BT headset to initiate the audio gateway and initialize Voice Command.

After that BT commands via earpiece button were no prob!

Bro I have tried that numerous times.....getting pissed now...lol.....what version are you usinf of MSVC?

[zadok]

Originally Posted by flyers2114

Bro I have tried that numerous times.....getting pissed now...lol.....what version are you usinf of MSVC?

The problem is that you know what you're doing, and I don't have a clue.

MSVC version: 1.60.4622.0

[flyers2114]

Originally Posted by zadok

The problem is that you know what you're doing, and I don't have a clue.

MSVC version: 1.60.4622.0

Hey at least you made me laugh....obviously on this one I don't know or I just need to walk away from it and come back to it when I settle down...I been going at it for about 3 hours now today...plus the time I put into yesterday....lol

[holo]

So what is the deal with MSVC? Does 19209 work fine or are all versions affected?

[toviaheli]

this is just an observation, it is more about Sashimi, but it is related to our discussions. I have an original version of Sashimi from before it was called that. I also have use the last two releases (6 and 7), and noticed an odd thing. If I use the original to install my stuff, I end up with about 28 MB free on boot.

If I use a later version I have 14 mb at boot.

[shaggylive]

hmm, that is interesting.. I have recently started messing with sashimi. I actually decided that it doesn't completely serve my needs, ie having different "auto" configurations. I can do it by having different folder's, but have manually change them based on which phone I happen to be setting up. I have actually started writing some mortscripts to do some of the customizations I want/need. hopefully I can make them compatable with sashimi though because I do kinda like how it automates some things.

[flyers2114]

Originally Posted by holo

So what is the deal with MSVC? Does 19209 work fine or are all versions affected?

19209 works......the only problem I am having is getting it to activate via BT and read my messages via BT....I can take calls and it reads messages and reminders through the phone fine.....

[holo]

Originally Posted by flyers2114

19209 works......the only problem I am having is getting it to activate via BT and read my messages via BT....I can take calls and it reads messages and reminders through the phone fine.....

so 19209 will not activate over BT?