PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Titan Development (http://forum.ppcgeeks.com/forumdisplay.php?f=57)
-   -   Linux/Android working on Titan (http://forum.ppcgeeks.com/showthread.php?t=31930)

CrashCore 03-17-2009 03:10 AM

Re: Linux/Android working on Titan
 
For those using a microSDHC card like I am, I found a way to get an otherwise incompatible card to work (at least for me).

Put these files on the root of your device memory: default.txt / haret.exe / initrd.gz / zImage
Put these files in the root of your card: data.gz / system.img

Works perfectly for me.

bigmase521 04-06-2009 02:19 PM

Re: Linux/Android working on Titan
 
I can't get Android to boot w/ my 2GB non-HC SD card. First I unzipped all the files to the root of the card, tried booting, got the "cannot mount SD card" errors. I reformatted the card and tried again.. same thing. I then tried CrashCore's suggestion to move certain files to device room and certain to SD root.. still nothing.

Then i tried unzipping the initrd.gz to initrd, and changing default.txt to point to initrd.. still no luck.

I've tried every step I've read in these Android threads, could it just be that it doesn't like my card, and I need to use another? I've never had any issues w/ this card before (flashing roms, radios etc.) until now :-/

thvoicwethin 04-07-2009 01:27 PM

Re: Linux/Android working on Titan
 
](*,)](*,)](*,)](*,)](*,)](*,)](*,)](*,)](*,)](*,)

While watching the College Bball Championship (Go Heels! Die hard fan here)
I FINALLY got android to boot. I messed with it and then reset the device to load it again. I try to load it, and the power management issue pops up, every...single...time.

NOW, i get to the part where its stuck and sends me to to command prompt:
HTML Code:

/bin/sh: can't access tty; job control turned off
THEN:
[  5.630000] SMD: ch 3 CLOSED -> OPENED
[  5.630000] SMD: ch 2 CLOSED -> OPENED

anyone help or got android to boot every time on the titan? I got it working ONCE, and loved it. Something new for me to play with. Plus the animations are nice, and the simplicity is great. I'm running DCD 3.2.4 i think, somewhere in the 3.2 area w/28 mb of RAM free. Here is my default.txt file:

HTML Code:

set MTYPE 1463
set KERNEL zImage
# I am testing keyboard on angstrom image
#set initrd angstrom.bin
# This one is Android from Vogue files
set initrd initrd.gz

set cmdline "ppp.username=IT ppp.password=IT msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htcvogue.panel_type=1 fbcon=rotate:3"

boot

anyone please help? I like Android and need to occupy myself with something different over spring break....No friend = no invites to beach = no money anyway :(

andason 04-07-2009 07:55 PM

Re: Linux/Android working on Titan
 
mines boots every time on my titan..mostly works well.. but some programs do crash / lockup i suppose due to low memory available.

- opera works very nice
- market doesn't seem to download app.. but Sam2 works fine

HTML Code:


 
set cmdline "ppp.username=IT ppp.password=IT msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htctitan.panel_type=0 fbcon=rotate:3 mddi.width=300 mddi.height=400"                                                       
 
 
 
 
 


andason 04-07-2009 08:10 PM

Re: Linux/Android working on Titan
 
1 Attachment(s)
Quote:

Originally Posted by trimleyman (Post 741989)
some from androidfreeware.org and a couple from t-mobiles site handango , only went for the free apps (was not about to pay if they were not going to function) , would love to find the youtube app though (have yet to find a source for that one) , am still surfing for other sources.

See if this one will work for you. I have it on my android.. but i guess it was built in..not sure if it was this app that made it work or not.



Edit... I removed the android utube app. I'm not certain if it is considered warez or not.

Open with winrar or ~

thvoicwethin 04-07-2009 10:13 PM

Re: Linux/Android working on Titan
 
Quote:

Originally Posted by andason (Post 831758)
mines boots every time on my titan..mostly works well.. but some programs do crash / lockup i suppose due to low memory available.

- opera works very nice
- market doesn't seem to download app.. but Sam2 works fine

HTML Code:

set cmdline "ppp.username=IT ppp.password=IT msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htctitan.panel_type=0 fbcon=rotate:3 mddi.width=300 mddi.height=400"

is that your entire default.txt?

andason 04-08-2009 07:32 AM

Re: Linux/Android working on Titan
 
no it has the

set MTYPE 1463
set KERNEL zImage

at the beginning. otherwise that is it.

bigmase521 04-10-2009 09:51 AM

Re: Linux/Android working on Titan
 
Man, I still cannot get Android to load on my Titan. I'm running the Titan Reloaded 1.4b2 rom if that makes a diff. I've tried putting the files in every place mentioned and it ALWAYS hangs on the "cannot mount sd card" error. At this point, it's got to be my SD card, even tho it's 2GB non-HC card. Cuz from what I'm seeing, it should just work - or work after a couple of tries - it's NEVER worked for me. Anyone else agree its the card?

andason 04-10-2009 08:19 PM

Re: Linux/Android working on Titan
 
it definately sounds like its your card.

i have all files on the storage card (inside NO folder). then i shortcut the haret.exe to my device just to keep from having to manuever through file explorer.

thvoicwethin 04-29-2009 03:00 PM

Re: Linux/Android working on Titan
 
new symptom:
Code:

warning: 'rild' uses 32-bit compatibilities (legacy support in use)
Happens about 4.5 seconds after running Haret.exe

I've unzipped the data.img file. Fixed my first problem. Now this comes up. This is obviously a modem issue because it has this when the problem persists:
Code:

          A N D R O I D
Initializing Modem:
===================
sh: can't access tty: job control turned off
#username=
Password=
APN=
[    4.441732] warning: 'rild" uses 32-bit compatibilities (legacy support in use)

I've tried this is NoData Enable and Disabled
Also: No username + No Password
Username but no password
Vice Versa
Disabling Titanium, 23MB of Mem free

EDIT::::GOT IT WORKING!!!!:-D

extracted data.gz to data.img and ran it. runs every time. now looking for ways to answer my calls ...hmmmm


All times are GMT -4. The time now is 08:17 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0