Issues after ROM update

sfenech · #1 (**permalink**) 05-20-2008, 12:23 PM

Sprint PPC-6800
Radio Version 3.35.04
In an attempt to update my ROM to a later version I had some issues.

First I put the Titan Unlocker on my phone which went on with no issues. Then I updated to Nex_3.35_no2_SPCS_SPB_FIXED2.exe, which went on with no issues. But unless my phone was connected to power after about 1 minute it just rebooted, any ideas?

I did some reading and thought I needed to update my radio version then did something I should probably not have done. I tried to put the update to the Sprint ROM 3.35.651.2 found at http://forum.ppcgeeks.com/showthread.php?t=20705. About 11% into the install of that ROM it stopped and looks like it turned my phone into a brick. After trying the install a few times and it stopping at the same spot I tried to put the Nex_3.35_no2_SPCS_SPB_FIXED2.exe version back on, which did work but it now says “No Radio”

Does anyone have any ideas?

rvashi · #2 (**permalink**) 05-20-2008, 02:04 PM

Put your phone into Bootloader (Hold down both Power & Camera buttons and soft reset with stylus, and release) and tell me what bootloader version you're using.

Also, are you getting anything at the initial startup screen? HTC logo?

And, what ROM do you want on your phone (ie. Nex_3.35 or no2chem or Stock)?

sfenech · #3 (**permalink**) 05-20-2008, 02:47 PM

I really wanted the Nex_3.35 if that will work with the update I am installing, what would you go to?

boot loader is
TITA100
SPL-1.20.0lipro

Booted as requested and testing it now, will report back in a few

Thank you for the help : )

Scott

sfenech · #4 (**permalink**) 05-20-2008, 02:50 PM

At 11% I still got the following error

Error 290: invalid command

rvashi · #5 (**permalink**) 05-20-2008, 02:53 PM

Okay there is your problem: You are using Olipro 1.20 Bootloader. The newer ROMs need Olipro 2.40.

Here is the link to the 2.40 forum. flash that first and then flash any ROM you want. It should work.

http://forum.ppcgeeks.com/showthread.php?t=9093

sfenech · #6 (**permalink**) 05-20-2008, 03:17 PM

It wants the device connected via activesync before it will see the device to update it. When I am stuck at the boot loader with no ROM on the system to boot to do, is it sill possible?

rvashi · #7 (**permalink**) 05-20-2008, 03:42 PM

Don't worry about it. It says that, but you can flash from bootloader.

If the RUU still gives you trouble, just flash a older ROM like Sprint 2.17. Or else, you lock the Bootloader back and then flash Sprint 3.35 stock ROM, which should update the bootloader and get you into a working phone. Then you can connect to ActiveSync and do the unlock using Olipro 2.40.

Let me know if any of that makes sense or not.

**Getitnowmarketing** · #8 (**permalink**) 05-20-2008, 03:55 PM

Run your carrier's stock non gps rom to get out of bootloader and boot into windows mobile so you can active sync. Then use the titan relocker and run titan exit bootloader (search). You should be able to run 2.40 olipro ( gps unlocker) to load a gps rom then.

sfenech · #9 (**permalink**) 05-21-2008, 12:08 AM

I just wanted to report that everything worked just in case anyone had the sanme issue
1. I updated to v2.17 ROM
2. updated the bootloader to Olipro 2.40
3. Updated to Sprint ROM 3.35.651.2
4. Finally to Nex_3.35
Other than an internet issues I am still trying to find a way to fix.
Thanks for all your help

**flyers2114** · #10 (**permalink**) 05-21-2008, 12:20 AM

Quote:

Originally Posted by sfenech

I just wanted to report that everything worked just in case anyone had the sanme issue
1. I updated to v2.17 ROM
2. updated the bootloader to Olipro 2.40
3. Updated to Sprint ROM 3.35.651.2
4. Finally to Nex_3.35
Other than an internet issues I am still trying to find a way to fix.
Thanks for all your help

Give some THANKS out to rvashi for helping you.....click the green THANKS on the threads he helped you in....