![]() |
Uscc 6800 Gps, Custom Roms, Downgrading Guide
1 Attachment(s)
OK Here we go,
UPGRADING A USCC 6800 TO USE GPS STEPS! #1. Obtain all the files you will need Obtain the sprint 3.35 radio rom file from here ftp://up.ppcgeeks.com/Titan/Radios/t...io_3.35.04.exe Obtain the Hard-SPL-MFG 2.40 bootloader here ftp://up.ppcgeeks.com/Titan/Users/Im...rd-SPL-MFG.exe Obtain PPCKitchen Buildos here http://ppckitchen.org/Downloads/BuildOS.msi Obtain BitPIM here http://superb-west.dl.sourceforge.ne....0.5-setup.exe #2. Install PPCKitchen and update it! (make sure you only do one update at a time updater has a bug) #3 record your EPST information just incase you end up like i did with the data connection not working. Optain this information by start<programs<file explorer<my device<windows tap on EPST file. (should be the 28b one if you have 2) Choose View tap view info (left soft key) tap M.IP Settings The following should match, M.IP SETTINGS Number of Profiles : 6 Active User Profile Index : 0 MIP_MODE : Mobile IP Prefered MIP Registration Retries : 1 MIP Registration Retry Timeout : 2000 ms MIP Pre-Registration Timeout : 3 Mobile Node-HA Authentication : Enable Send a Registration Request Only in Use : Enable Dormant Hanfoff Optimization: Enable View info<M.IP Default Profile M.IP Default Profile Enable Profile : Enable NAI : **********@uscc.net (*'s are your ten digit MSID number) MN HA SPI Set : Enable MN HA SPI Value( Hex ) : 10E1 MN AAA SPI Set : Enable MN AAA SPI Set Value ( Hex ) : 2 Reverse Tunneling Preferred : Enable Home Address : 0.0.0.0 Primary HA Address : 255.255.255.255 Secondary HA Address : 255.255.255.255 DMU public key(PKOID) : 41 Hit ok Bring up "Phone" Dial ##000000 tap talk Record MDN : ********** MSID : ********** Home SID/NID #1 : ***/***** #4 Connect and sync your 6800 Run Hard-SPL-MFG.exe FOLLOW INSTUCTIONS COMPLETELY TO THE LETTER! #5 When you get to the 2.40 bootloader screen Run the titan_radio 3.35.04.exe #6 Start up PPCKitchen BuildOS Cook your rom with your choices useing the Titan_No2Chem_5060_WM6.1 selections make sure the carrier is set to US Cellular when you get done choosing your module's click the play next to the save icon, let the rom build and the RUU should come up. flash the rom #7 let the phone boot up! once in the phone test to make sure you can make a phone call if phone call works, test data connection if data works your done! if not follow the rest of this guide. If phone calls and data dont work do the following! #1 Install bitPIM open phone Dial ##3424 Hit talk PC should see new hardware, install drivers automatically Phone should still be at the DIAG screen Start Bitpim edit<settings change phone type to "other CDMA phone" Com port click on browse choose the "HTC DIAGNOSTIC INTERFACE" View<View filesystem on the left task plane, choose filesystem expand the filesystem on the right task plane open DMU folder Right click and choose new file add the 41.key file from the zip attached to this post. ok restart phone When phone comes back up bring up phone dial ##000000 tap talk Enter in the information you preously wrote down from this screen when phone comes back up do the following Start<file manager<my device<windows tap EPST file Choose Edit 000000 is the security code View info>securiy make sure that the @uscc.net is after the number and not cs3g.com Then View info>M.IP Settings check and change info as needed here Then View info>M.IP Default Profile Check and change info as needed here hit ok follow promts, phone will reset If done right the phone should have voice and data connections as well as GPS! Ask if you have any questions! Thanks! Joe Johnson Maverick351ci Credits to PPCgeeks.com, PPCKitchen.org, XDA and Google! |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Reserved For Downgrading Guide!
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Reserved For Future Updates
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
When I try to dial ##000000 I get message that the call could not be completed as dialed.
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
im just guessing here, but im betting that you put the sprint update on your phone and had the customizations run?
if thats the case you will have to downgrade your phone im going to start on that guide right now. does, ##778 work? |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
What exactly are you planning to downgrade? It has been stated multiple times in several threads that it is not safe and a downgrade of the radio should not be attempted at this point. Really not sure why you need to downgrade anything.
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
Also, reverting to pre 3.35 (No GPS) is a risky and therefore bad idea. BTW, your Bold key is stuck. |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
Yes i read that in several threads about it not being safe after i got stuck in the locked bootloader, but i did find a way out of it and now have a system set that i can go back to the stock radio just fine and back up! i have done it to 5 of these just fine and never once had to have the phone replaced downgrading is a good idea for the following reasons, #1 in case of warrenty work #2 in case USCC releases an offical rom with GPS enabled #3 in case you want to go back to the stock settings taking out GPS and getting all the OE files and programs back #4 to start over incase you let the sprint customizations run that change everything on your phone even how you access certain features like the ##000000 and so on. its easier to go back than it is to fix a ton of differences and im sure there are other reasons that im not thinking of. Im making this guide to hopefully help some USCC people with this phone since it took me a few solid days to track down the information and try out different things as well as some of my own and get them to work right the first time! and over the course of this i had to downgrade my phone several times to start over! any other questions? because i feel like your making a statment that it cant be done when it can be done for i have done it. and im sure others have as well, its just not all assembled into and easy to use blueprint (guide) |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
BTW try clicking the link to buldOS i posted, it does work :) as for risky, i wouldnt say that it is any more risky than upgrading custom firmware :) as with everything, its use at your own risk right? but maybe, just maybe, if you have a working guide that if you follow it reverting back works, then maybe it will cut down on the people who think they "Bricked" there phone :) and, or help people who get stuck in a bootloader screen :) |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Well, the bricked mode is not just stuck in bootloader. However, I just wanted to make sure you were giving ample warning to people before they jumped into your guide once you put it up. If it works great, but I think people should also know that there are some serious consequences that may occur.
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Um, Trust me its WAY more risky than just normal OS flashing. There is part of the radio that will never be overwritten after going to GPS radios (by current known means) despite the version number actually changing. This can lead to bricks (see sig) but not always immediately. Additionally, there could be some random incompatibilites with an inconsistent radio image.
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Any link other than http://ppckitchen.org/downloads/buildos.msi does not guarantee the latest stable release.
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Colonel, Thank you, and i plan on putting a nice big red warning on the top of it when i get around to post it up here, i do agree that people should be warned, even though anything you find for information is use at your own risk on the net :)
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
ImCokeMan - True, the downgrade is more for getting settings back so you can reupgrade to the GPS rom, or if you was getting rid of your phone, warrenty whatever you may want to, or for the daring like me that will give it a try, if it causes problem you can allways upgrade again!
Tiermann - Thanks i changed the link on the first post, but i kinda figured that the updater would get the most current release.... am i wrong? |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
Quote:
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
Quote:
Quote:
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
you can read more about the downgrading debate here
One Final comment for tonight: On the Original (not slim) Sony PSP, once you downgrade from an "official" 3.XX release of the firmware back to the kickass 1.5 - you cannot upgrade to any 3.XX "official" version without very high chance of bricking your device. This is due to xtra files left behind in the NAND memory - Although you can install custom firmware so that you have the best features of both 1.5 and 3.XX Once again, same concept i believe :mrgreen: |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
I understand all of everyone’s concerns, I really do. but here is my deal, during the course of messing with things to get everything back up to normal, I had to downgrade my boot loader to 1.00 then up to 1.20 then up to 2.40 several times as well as go back in radio ROMs and OS ROMs in the same manner to get the sprint customizations off my phone and the ##000000 working again like it did originally when the sprint customizations ran it changed it to ##778 one, now this isn’t a big deal to most but if I was to take my phone in to get it worked on, I didn’t want to have to explain why the epst access was different to the noob working the counter trying to gain epst access to my phone. Most of the people can only follow what there procedure is and not think outside the box. this is just one example of what the customizations change, and im sure that there is another way of fixing them, but everything I read said to go back to the stock ROM for the Alltel users and to do so you must downgrade.......
Correct me if im wrong, but I really do not want to beat a dead horse with the downgrade debate, this isn’t the intentions I had for this tread I just wanted to get some options out there to the USCC users of this device since it is very new in the USCC market and all, finding information on this carrier is very hard to sift trough, and most of what I have listed has come from many different threads on here XDA and random forums found trough Google, I just wanted to compile what does work for USCC in one place you know..... so if its all the same to everyone, I would like to end the downgrade debate as of this post and save this tread for questions and responses to the process as well as ideas and updating the main topic. |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Whatever customizations you collected when you did the downgrade should be saved seperately and made available to everyone so that not everyone does the downgrade.
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Great write up maverick351ci! thanks for taking the time to write it down and of course for the 'big ones" to get where few of us USCC people have gone! On a related subject we are often asked to THANK SOMEONE when they help you... how do you actually do it??? because you get a big THANK YOU from me!!:headbang:=D>
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
so mykleh35, i take it you finally couldnt take it anymore and tyred it out! so im guessing all is well with your phone my guide worked, no problems?
everyone that has used my guide thus far please give me feed back as to how to make it better or if you encounter any problems! |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
No I haven't upgraded yet... I'm reading everything over 3 times.. righting down everything I might need... you know the typical anal things... this is my work phone so I want to make sure it gets up and running.... dum questions.... I really don't mind the way my phone works now (lots of people post I hate this, hate that) but want to add GPS to it. what is the best approach to only add gps? I get into this whole kitchen thing and it gets confusiing.. all I reallly want to do for my first attempt is turn on GPS and leave the rest as it is now... know what I mean? then I'll tinker...
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
i know exactly what you mean, thats all i wanted to add the first time myself and have been working on building a kitchen thats as close to origonal as possible. although there are some handy things in the kitchen that i have added like the "Slide to unlock" and the WMP today plugin and GPStoday. i also have a little cab that will revert the text msg back to individual text messages instead of the threaded type (i hate that) the one thing i wish i could find is the origonal 7 button comm manager but im probably going to have to figure out how to port it into the kitchen off of my backups
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
maveric why did you recommend the No2Chem_5060 instead of the PPCKitchen standard 5060?? did you upgrade via USB or the card? just curious.. thanks so much for walking me through this..](*,)
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
Hope tha clarifys it a little bit :) |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
well I took the plunge and upgraded yesterday.... there was one very anxious moment but I logged into chat here and someone fixed me up quick!! GPS works, but the phone is much slower than before. next dumb question how do I get some of the programs off the phone as I was so nervous picking stuff in the Kitchen I ended up with more than I need, stuff I don't like and duplicates but under remove programs I don't see any programs... I'm hoping this will help with the speed and memory.. only other comment for some reseaon my phone says CellSouth in phone mode or main page but I did change it to US Cellular in NAM settings.... don't want to advertise I hacked it.. Do I go through the Kitchen and unselect stuff I want off and reflash?? thanks again for all the help and support!!
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Yes, you will need to do another build to remove the selected programs.
When you changed the name in the NAM settings, did they stay after a soft-reset? I have tried chaning mine and it always changes back. |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
the name stays in the settings its on the screen that is goofy... I'm thinking its hard coded in the front page I'm using.... going to remove some stuff and see if I can get this thing moving I'm at 73% running hardly anything...
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
I've been told it is set by the sending tower, or something like that.
I've changed mine and it just gets reset afterwards. I think this is a problem with all USCC upgrades at this time. Hopefully someone can come up with a fix for this problem. |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
i'm having problems getting bitpim to work correctly, i type in the ##3241 or whatever and windows detects two ports but cannot find any drivers for them. any ideas?
also does installing the new rom/radio delete all the data on my phone? i'd like to back up my phonebook |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Yes, do a sync with your pc before you start, your phone will be wiped completly.
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
These are the ##codes from my 6800: ##3282 (DATA) ##3424 (DIAG) ##778 (PST) ##2539 (AKEY) ##33284 (DEATH) ##7738 (PREV) ##775 (PRL) ##786 (RTN) ##8626337 (VOCODER) yeah yeah it's actually DEBUG, but DEATH sounds better :mrgreen: Quote:
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
yea thats what i meant, ill just do a sync, wish me luck |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
i have a hell of a problem. there was some time lag after i ran the Hard-SPL-MFG.exe and the titan radio 3.35, and now when i try to flash the rom, it gives me an error that the phone is not connected, though the usb is connected and the phone is in the cradle. i am running Vista, and getting the phone to sync in the first was never easy. is there anything i can do or did i just ruin my phone?
*EDIT* i restarted both the phone and computer with no luck, the exact error i am getting is ERROR [260]: CONNECTION the upgrade utility cannot connect to your phone. please check that your cradle is connected and the phone is in the cradle. EDIT # 2 never mind, i figured it out. i did a hard reset (camera button, power button, reset button) and the multicolored screen came up, everything worked fine from there |
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
well i updated everything, and still no gps. any ideas whats going on? also if i want to cook another rom and load it, can i just load it or do i have to remove this one somehow?
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
Quote:
|
Re: Uscc 6800 Gps, Custom Roms, Downgrading Guide
alright thanks. i used everything per this guild. Titan_No2Chem_5060_WM6.1 selections and the 3.35.04 radio. gps was set to active. i tried searching for gps but i think the forums hate me or something because i got no results?? might you have a link to that dll cab
|
| All times are GMT -4. The time now is 02:24 AM. |
Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com