Re: nueLED - configure/customize your LEDs...
 

Its a great little app! And welcome to PPCGeeks!

Re: nueLED - configure/customize your LEDs...
 

Hi folks (my 1st post, so I hope I don't mess up!):

I found a program called KaiserNotification, designed to program LED's on the Kaiser/Tilt. Because nueLED works on the Kaiser, I decided to try KaiserNotification on my Mogul.

It does seem to work, at least partially, on the Mogul. For example, I could set the phone service LED to blink green, amber or RED! Unlike the Mogul, the Kaiser seems to assign phone service and bluetooth to the same LED. So, when I programmed phone service "green" and bluetooth "red", I got flashing amber (green + red) -- not too useful.

The "About" screen mentions 2 web sites, one of which may have information on LED programming. I'll leave it to experts like no2chem to track that down and see if it's useful.

Here's a link to the program (use at your own risk!). I had to join the site (MoDaCo) before I could download.

KaiserNotification

Thanks, -- robinsondm

Re: nueLED - configure/customize your LEDs...
 

yeah, i know about that program, it does something with the notification queue and the "force led" ioctl...

Re: nueLED - configure/customize your LEDs...
 

Sorry guys but i am not able to make any changes. could someone break it down a little more for me. I would like to successfully turn my green led to blink blue. I guess i don't understand how to redirect and or make any changes. Any help much appreciated. Thanks

Re: nueLED - configure/customize your LEDs...
 

Just installed 1.5 in my Mogul, tried to remove Address 8 Mode 1 to stop the green led from flashing, still flashing. Put it back thinking it was the wrong LED. The removed Address 22 Mode 2, did nothing, put it back and got the registry corrupt error. Reinstalled, figured out that Address 8 was the correct one, removed it again, still blinking. Added it back and when I hit test, it blinks so it's the right one but what do I have to do to disable it?

/Peter

Re: nueLED - configure/customize your LEDs...
 

What ROM are you using?

Re: nueLED - configure/customize your LEDs...
 

no2chem... I think I have an idea on controlling the frequency of LED flashes.


Its very similar to what you already have implemented into the LED address runthrough..
You could make a flashing pattern configurable with speed, and have the nueLED program send the command every time the light has to flash.

For the police light mod, you could have the red and blue flash every 250 ms, and have one of them at a 125 ms offset.

You probably are buried under work, but do you think this will work?

Re: nueLED - configure/customize your LEDs...
 

The new and updated from HTC, come with the Mogul.

Re: nueLED - configure/customize your LEDs...
 

probably,, but you have to remember the control signals consist of both "on" signals and "off" signals.

i guess i'd end up creating "virtual" addresses that "flash" signals....

Re: nueLED - configure/customize your LEDs...
 

anyone.......?