Re: Data on TELUS WM6.1 GPS roms
 

http://ppcgeeks.com/forum.ppcgeeks/s...ad.php?t=31437

Follow the instructions
QPST GPSOne Settings:

These settings are used to properly configure the Assisted-GPS on the Telus HTC Touch (Vogue). Without these settings, many people cannot get the gps to work, but after applying these setting, get an instant GPS lock.

1. Connect your Vogue to your computer with the usb cable. This is also an excellent time to back up anything, just in case.

2. We need to put the phone in diagnostic mode. This is done by running dmrouter.exe, similar to epst.exe by dialing ##DIAG Send (##3424 Send) or ##DIAG# (##3424#)

3. Let windows install your new hardware. There will be two dialogs that come up. The first one should install after you click next. The next will require a file called qcmdmxp.sys and says it can't be found. As luck has it, your computer already has this file, and it's located here:
C:\WINDOWS\system32\drivers\.
Simply tell the wizard to look there, and it will show the file, click on it, and the installation will finish.

4. Install QPST if you haven't already.

5. Run the Service Programming program under the QPST start menu.

6. Double click on the little globe at the bottom right of your screen.

7. Click on Add New Port, and add COM4 - USB/QC DIAGNOSTIC. (might be another COM for some people)

8. Close the QPST Configuration window, and go back to the QPST Service Programming window.

9. Click on your phone, which should now be there, and then click OK.

10. Click on Read From Phone and then enter your SPC and click OK.

11. Goto the gpsOne tab (you'll have to scroll to the right) and enter these details:

Code:

Allowed = checked
Assistanc-Spherical = checked
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = PDE12. SOFT RESET

13. Test GPS - I got 8 satellites in 1s

It works for the Vogue, Titan and Diamond