Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

thanks for all your efforts. i'm pretty new to flashing. eventually i got 5048 to work but the only flaw it has is it randomly resets itself. sometimes consecutively like 7-8 times in a row when unplugged. when it's plugged into the laptop or wall jack it's fine but very unstable when not. i did a search on this thread and haven't found any issues about this. i've done soft resets and if unplugged it'll continue to loop and reset. the last time i did a hard reset i think i was back in bootloader mode. i tried to relock but that wasn't going. maybe i was at the wrong stage for it to make a difference. thanks again

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

im gonna try again with a dif one..

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

it is a issue no2chem.I just reflashed #48 3 times in a row.allowed initial reset after sdtext. then when phone reboots seems to take a few minutes to locate signal.if you go into phone settings for roam.switch from automatic to roam then enter it takes a few minutes again.sometimes it wont work till a soft reset.And this is a clean install with no programs added as well. any ideas?

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

i am reflashing from the titan relocker.. to the sprint unreleased rom .. to dcd's rom... hopefully this will resolve... if not, anybody have a link to the stock sprint roms that come on the phone most recently.. so i can try and get a new phone possibly tommorrow.. Ugh.. this makes me sick to my stomach sometimes.. i hate being without a phone

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

i think i fixed it................it still slow on first restart...but find signal now with in 15 seconds. when phones fully done booting.As well as switching from automatic to roam happens with in 3 to 4 seconds now.i reinstalled everything in the extrom.overwrote the iota.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

any way to remove the battery icon next to the EV icon? I use quickmenu and dont need it.

BTW, thanks No2chem with 48. Working just fine for me so far.
?
Is there any way to put the disconnect bubble reg hack and the disconnect idle connection?
http://forum.ppcgeeks.com/showthread...dle+connection

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Here are the registry settings

Restore/Remove clock on top bar

[HKLM\Software\Microsoft\Shell\]
"ShowTitleBarClock"=1 (enable)
"ShowTitleBarClock"=0 (disable)

Show Time,Date,both or Battery on top bar at Today screen

[HKLM\Software\Microsoft\Shell\]
Time:
"ShowTitleBarClock"=1 / "TBOpt"=1
Date:
"ShowTitleBarClock"=1 / "TBOpt"=2
Both:
"ShowTitleBarClock"=1 / "TBOpt"=3
Nothing:
"ShowTitleBarClock"=1 / "TBOpt"=0
Battery:
"ShowTitleBarClock"=0 / "TBOpt"=1

You may have to add TBOpt dword value if it doesn't exist. These settings won't take effect until a soft reset.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Is anyone having a problem w their beam?

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

[QUOTE=hotbyz168;188605]Is anyone having a problem w their beam?[/Q



yes yes yes

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Ok, I didn't want my first post here to be a cry for help, but I tried to flash to No2Chem's 6.1 ROM #48 and after following all the steps to install the bootloader, unlock the phone, etc, I flashed the new ROM and I'm now stuck on the htc screen. I see the radio version, which is 1.47, and the d 3.16. After that goes away, the htc logo remains and nothing happens. My computer doesn't recognize it at all. Am I screwed? I've tried both hard and soft resets. Thanks to any who help

http://67.228.199.237/forum.ppcgeeks...c/progress.gif http://67.228.199.237/forum.ppcgeeks...ttons/edit.gif