Verizon Omnia 2 I920 Tethered Finally!

OmniaFan1 · #1 (**permalink**) 02-07-2010, 11:55 PM

After messing with this and having no success, I finally have WMWIFIRouter 1.61 running on my Omnia 2 I920. I had prevoiusly tried installing the .cab file from their site and also the free older version. Prior to this I installed an ICS .cab from my previous I910 and an IP Router cab that WMWifiRouter gave me for the I910. Version 1.61 would install but I would get "limited connection" through USB even when my Omnia 2 said connected and the WIFI would just say "searching" when ever I attempted to use Broadband to WIFI. Finally I did a hard reset and tried to install Version 1.61 through the .exe version from WMWIFIRouter's site. Prior to this, I turned on WiFi, and Bluetooth and the phone. I did NOT install the old version of ICS I had. Everything is working perfectly now! So if your having similar problems as I have seen around the net, try this and good luck!

chriswells13 · #2 (**permalink**) 02-08-2010, 02:06 AM

The program PDANet also works for tethering and no tinkering is required.

Robtao · #3 (**permalink**) 02-08-2010, 11:43 AM

I simply installed the ICSInstall.CAB and it works. I was having trouble (connected but no internet) with one of the cooked ROMS before flashing back to stock via Wozzers Stock ROM .nb0.

Edit: Not working any more on cooked ROM.
Edit: Now working on Ninja4Hire Today ROM.
Edit: Not working anymore

wsetliff · #4 (**permalink**) 02-27-2010, 10:57 AM

Would someone please post the ICS.cab file for Wmob 6.5. I want to get my Verizon Omnia 2 going. Thanks!

#5 (**permalink**) 03-02-2010, 09:45 PM

ICSInstall.CAB

I just used this file on my 920
Install ICS cab (above)
Restart the phone
Run IntShrUI from programs
connect with USB cable until the phone shows connected
close the program
run WMWiFiRouter
3g to Router

The first time it connected to the internet and then disconnected saying disconnect for unknown reason. When I tried the second time, it worked perfectly and has continued since.

Hope this helps everyone.

BetaMan · #6 (**permalink**) 03-31-2010, 08:56 AM

Quote:

Originally Posted by RacerJT

Attachment 61442

I just used this file on my 920
Install ICS cab (above)
Restart the phone
Run IntShrUI from programs
connect with USB cable until the phone shows connected
close the program
run WMWiFiRouter
3g to Router

The first time it connected to the internet and then disconnected saying disconnect for unknown reason. When I tried the second time, it worked perfectly and has continued since.

Hope this helps everyone.

What ROM are you using and can Verizon tell you are tethering?

Geebox · #7 (**permalink**) 03-31-2010, 10:52 AM

Quote:

Originally Posted by BetaMan

What ROM are you using and can Verizon tell you are tethering?

No they can not. You can always log onto your Verizonwireless account and view your data usage if your not sure.

jpinsl · #8 (**permalink**) 04-03-2010, 08:15 PM

Here's another method to tether using the USB cable:

Use Data Connection from your phone to tether:
1) Put the USB Connection in Activesyn mode; tick the Enable Advance Network Functionality.
a-1) Set USB connection to activesyn with advance network enabled
a-2) Disable your auto disconnection in your data connection setting.
a) Connect the device to the PC using the USB cable.
b) Connect first to the activesyn/Windows Mobile Device Center (automatic)
c) Start ICS on the phone
d) Press connect
2) You might gett disconnected intermittenly from ICS due to the Data Connection settings. If you've set that the data connection will be automatically disconnected after X mins, basically, as long as there are no packets, it will be disconnected.
3) If you are connected via GPRS any call/sms/mms coming in will disconnect the connection
Use 3G connection and it will stay connected.

~SECURITY~ · #9 (**permalink**) 05-31-2010, 04:02 AM

Quote:

Originally Posted by jpinsl

Here's another method to tether using the USB cable:

Use Data Connection from your phone to tether:
1) Put the USB Connection in Activesyn mode; tick the Enable Advance Network Functionality.
a-1) Set USB connection to activesyn with advance network enabled
a-2) Disable your auto disconnection in your data connection setting.
a) Connect the device to the PC using the USB cable.
b) Connect first to the activesyn/Windows Mobile Device Center (automatic)
c) Start ICS on the phone
d) Press connect
2) You might gett disconnected intermittenly from ICS due to the Data Connection settings. If you've set that the data connection will be automatically disconnected after X mins, basically, as long as there are no packets, it will be disconnected.
3) If you are connected via GPRS any call/sms/mms coming in will disconnect the connection
Use 3G connection and it will stay connected.

Is this way free?

Omega Ra · #10 (**permalink**) 01-18-2011, 02:06 PM

sorry to be a thread necro...but I got WMwifirouter 2.0 and it installs and connects and says there is a network (WMWifirouter_2766) but my nook doesn't see it...what am I missing, am I supposed to be connected to my computer? My internet sharing works fine when tethered USB. But I want my phone to work as a hotspot without a computer so my nook can get internet through it...