PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Imagio Development (http://forum.ppcgeeks.com/forumdisplay.php?f=121)
-   -   [ROM] Project: Teya 2.0.3 [23-Jan-2012] (http://forum.ppcgeeks.com/showthread.php?t=137641)

phone1 03-12-2011 08:11 PM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
I'm loving this ROM. I am having a problem with receiving MMS videos they show up as a slide show any ideas what I'm doing wrong?

jmart518 03-12-2011 08:52 PM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
Quote:

Originally Posted by docj (Post 2067461)
Just flashed with the .exe, seemed to complete fine. On restart, my phone hangs at the HTC quietly brilliant screen. Anyone else have this happen? I figured out how to connect it in bootloader screen & am trying to reflash now, see if that corrects it.

Update: no dice for me, still sticks on splash screen. Or am I just not giving it enough time, longer than 3 or 4 min to change screens?

Quote:

Originally Posted by pm_mazur (Post 2067680)
Something had to happen while you were updating your ROM. Your phone might have gotten bricked. Try reloading the original MR1 update and then reinstall the ROM

Definitely not bricked, when you have a brick, you literally have a phone that won't boot. No splash, no sign of life. Sounds like a bad flash, just like pm_mazur suggested, maybe flashing back to stock and then trying again.





Quote:

Originally Posted by bobfoertsch (Post 2067524)
I flashed from 1.4.0 to 1.6.0, however, when attempting to install my addtional apps, I discovered that cab files would not launch. I did not attempt to reflash, but went back to 1.4.0. Anyone else having this issue?

I also noticed that the Microsoft My Phone app was not present in the ROM either. This was actually the cab file I was trying to install when I discovered that cabs would not run.

Microsoft My Phone was removed and will be included in the Addons in Post 3. I haven't had any trouble installing 3rd party apps.





Quote:

Originally Posted by bawaji (Post 2067548)
Jmart, some quick feedback based on a few minutes of playing with the ROM:

- ROM is fast, especially with WiMoSpeed set to 691MHz
- Plus code dialing works fine
- Youtube worked fine too
- Everytime I make a change in CHTeditor and exit, I get an error. But the change takes place.
- Battery drain is high. Maybe something I am doing wrong? Battery level went from 72% to 17% in the matter of a couple of hours of very little use. Will let it run down to zero to check if it is just an error in the reporting
- Would like more control over backups. How do I add PIMBackup to my quick links? When I try to install PIMBackup from my storage card, it opens up PIMBackup right away. Is it already installed? If so, it does not show up in the list of programs.
- I added Whip2snap as a quick link but program would not open -- does not exist error. Re-installed and it worked.
- It will be nice to include Dial up enabler/disabler or Data Controller so data can be turned off via a quick link
- Could not find notepad application. Is it the same as notes?

Thanks jmart!

Thanks for the feedback! I'll try and clear a few things up:

-The error with CHTE is a well known error, not anything to do with Teya, but with the program itself. This will probably not be fixed any time soon. To avoid, try not to exit CHTE from its start page.
-Wow! Definitely not normal, something strange must have been running in the background or possibly bad reception and your phone was trying harder to acquire a signal.
-Yes, PIMBackup is included and is part of Teya[Portal] backup "Contacts". I can look into creating a shortcut enable/disable option in the next release. You can find the .exe in the Windows folder.
-The whip2snap.lnk is incorrect. I will attach a fix cab as soon as I get back to my house or first thing tomorrow.
-Probably won't include Dial up enabler/disabler, because it may cause the slide to answer problems again. This is already available; press on an empty quicklink, Toggle Switch, select "Data". It does work and it changes data state, but doesn't "visibly" change. I am working on this still
-I don't include notepad, however, I do include Notes and OneNote




Quote:

Originally Posted by pm_mazur (Post 2067689)
keyboard is back! thank you! I'll give this rom a whirl in a couple days or so.

You're welcome, I hope you enjoy the ROM!




Quote:

Originally Posted by phone1 (Post 2067692)
I'm loving this ROM. I am having a problem with receiving MMS videos they show up as a slide show any ideas what I'm doing wrong?

I will test right now and report back...
Update: You are exactly right, I will get this sorted out asap and get a hot fix out.

citop 03-12-2011 10:39 PM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
tried 1.5 and 1.6. a couple of questions:
1. handwriting and pinyin input method in 1.6 is missing
2. mms manual configuration instead of using the automatic config.

pm_mazur 03-13-2011 03:45 AM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
Well I've tested some aspects of the ROM and here are the issues I found. iManager icon doesn't seem to launch neither does Whip2Snap (which I'm careless about lol). I've sniffed out a poor quality over the bluetooth audio when it comes to hooking up the speakers. I'm hearing static when it comes to playing audio. when phone is in idle, the static is gone. I'll look up further into it.

Also whoever mentioned about My phone... Google it and you'll find the cab available on the microsoft website. If you still have trouble I'll send you a cab or direct link to the site

gokudre 03-13-2011 04:51 PM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
So far so good except one thing.

After i got 1.6 up and running i discovered i had an issue with contacts. so i decided to back up everything exporting with CHT and for double backup i also uses the teya portal backup. after reflashing i tried to import things after reflashing a few times and using either of the backups i get nothing but a black screen for the home page. Not sure if its a backup issue or something in my sence that i backed up was broken. Its weird because it was fine before i flashed so it wasnt a black screen prior.

sailorcanfly 03-13-2011 05:29 PM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
Just flashed 1.6. like it so far, especially the background picture, it's so artistic.

bobfoertsch 03-14-2011 08:55 AM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
Quote:

Originally Posted by pm_mazur (Post 2067864)
Well I've tested some aspects of the ROM and here are the issues I found. iManager icon doesn't seem to launch neither does Whip2Snap (which I'm careless about lol). I've sniffed out a poor quality over the bluetooth audio when it comes to hooking up the speakers. I'm hearing static when it comes to playing audio. when phone is in idle, the static is gone. I'll look up further into it.

Also whoever mentioned about My phone... Google it and you'll find the cab available on the microsoft website. If you still have trouble I'll send you a cab or direct link to the site

Thanks. I actually have the cab file. For some reason, I was unable to install ANY 3rd party apps after flashing. I will try it again later. I had to go back to 1.4.0 so I could use my phone.

bobfoertsch 03-14-2011 10:18 AM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
Quote:

Originally Posted by jmart518 (Post 2067708)

Microsoft My Phone was removed and will be included in the Addons in Post 3. I haven't had any trouble installing 3rd party apps.

jmart:

The only cab file I see in Post 3 is Visual Voice Mail. Am I missing something?

BRosenow 03-14-2011 08:25 PM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
Quote:

Originally Posted by sailorcanfly (Post 2068022)
Just flashed 1.6. like it so far, especially the background picture, it's so artistic.

Agree. So far I really like it! I haven't seen anything I need that it won't do.
Great job Jmart!!!

pm_mazur 03-15-2011 01:34 AM

Re: [ROM] Project: Teya 1.6.0 [11-Mar-2011]
 
Quote:

Originally Posted by bobfoertsch (Post 2068272)
Thanks. I actually have the cab file. For some reason, I was unable to install ANY 3rd party apps after flashing. I will try it again later. I had to go back to 1.4.0 so I could use my phone.

I actually got to install myphone without any problems. The only problem I'm having right now is a poor battery life span.. It gets me for around 14hrs until I get a low battery warning.. The thing is that I have a battery extender and usually using stock or energy ROM it should last for over 48 hrs. Is this a bug or are there too many processes running in the background? I am overclocking to 728mhz (yeah I'm not scarred :P).


All times are GMT -4. The time now is 05:12 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0