![]() |
Tethering Touch with WM6.1. Step by Step instructions
Newbie with all of this and Need Help TETHERING my Touch.
I have WM 6.1 and Windows Vista installed on my laptop. Can someone post: A) Step by Step instructions on how to tether straight up Or B) Instructions on What to do after UNZIPPING .CAB File Thanks |
Re: Tethering Touch with WM6.1. Step by Step instructions
Celly, i posted the instruction on how to use a .cab yesterday after you asked, here it is again:http://www.pocketpccentral.net/help/...l_cab_file.htm
Those are step by step instructions of how to install a.cab its pretty specific and its the same one i used a few months ago when I was unsure.Just take a look at that and hopefully it'll help. |
Re: Tethering Touch with WM6.1. Step by Step instructions
Ok Just what I needed check it out also..Thanks Hoover
|
Re: Tethering Touch with WM6.1. Step by Step instructions
No prob just follow instructions and if you have any questions ask remember there is a green icon for thanks...Hopefully it helps!!!
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Thanks Hoover...i will give that a shot
|
Re: Tethering Touch with WM6.1. Step by Step instructions
1 Attachment(s)
first you need to install the fix (cab) for tethering with WM6.1
here it is: Attachment 15429 after you install this cab perform a soft-reset of your phone (just restart it) After you phone completely finishes booting up follow these steps: 1)Open Up your browser on your phone and wait for it to display a webpage. 2)Minimize the browser 3)Open up Internet Sharing in your programs folder on your phone 4) Choose USB under PC Connection 5)Hit connect (bottom left) 6)Turn OFF the Wi-Fi on your PC 7)Connect your USB cable to your phone & PC 8)You should momentarily see two little computers connecting next to the clock in your taskbar on your PC 8) Open up your browser on your PC and BAM! |
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Thanks guys for all the help!
|
Re: Tethering Touch with WM6.1. Step by Step instructions
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
Not just a link to the .cab Very Detailed and descriptive!! THANKS a bunch Sonic! GREAT JOB!:headbang: |
Re: Tethering Touch with WM6.1. Step by Step instructions
Im curious why they make it so hard for you guys to tether. On alltel all I have to do is connect to my laptop via usb and run the "internet sharing" program on my ppc and it tethers automatically.
|
Re: Tethering Touch with WM6.1. Step by Step instructions
That option has been made available to use through custom ROMs so I'm not quite sure. I have been using my phone for all sorts of stuff whenever the Internet at my house has trouble, even rocked out on xbox live one day.
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
I'm trying to Tether without being Charged..and I'm not surprised if that requires a couple more steps or more energy! lol |
Re: Tethering Touch with WM6.1. Step by Step instructions
I dont pay extra for it lol.
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
Can someone help plz? I'm using Window Vista |
Re: Tethering Touch with WM6.1. Step by Step instructions
beat the computer with a stick really hard and then yourself for choosing vista .... lol Jk
check your comp for a WIFI switch or button first, if nothing then go into connections and find the wifi and right click to disable. |
Re: Tethering Touch with WM6.1. Step by Step instructions
hey all, im tethering right now with my touch but i hav a q.....how o u get charged for this..cuz i dont want to get charged for it, im connected via usb and using dhharveys lack vista rom.. it works fine and says sprint pcs on my phon whe i click the wireless manager.. i guess u only get charged if it says phone as modem?? im on sprint thanx
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Well if you had a unlimited data plan then they would most likely never detect unless you went over the so called limited download amount that sprint supposedly has "5gb"
but I'm not sure if that even still exist |
Re: Tethering Touch with WM6.1. Step by Step instructions
That "limit" supposedly is only for wireless cards and PAM, not for phones yet... so if you are tethering, you could actually go over 5gb and not worry.
|
Re: Tethering Touch with WM6.1. Step by Step instructions
how do i get permission to download that file
|
Re: Tethering Touch with WM6.1. Step by Step instructions
There should'nt be a Issue with Downloading it...
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Do the steps from post #6 also work with bluetooth besides USB?
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Why don't you try it?
Yes it does work with bluetooth. |
Re: Tethering Touch with WM6.1. Step by Step instructions
I have followed the instructions, but when I go into the internet sharing tab and select USB, the connect option on the lower left is greyed out (can't select it). Any idea what I'm doing wrong?
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Internet Sharing FIX.cab
PhoneAsModemTOSprintPCS.cab What is the difference between these two cabs? Quote:
Quote:
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
Any possibility of providing step by step to get bluetooth running with this setup. |
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
Loook into it but it is a slower connections http://pdaphonehome.com/forums/ppc-6...ows-vista.html |
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
I managed to get Bluetooth PAN internet connection to work through ICS. After Bluetooth pairing the HTC Vogue and computer(VISTA64 in my case) Turn off Wi-Fi on computer, or disable it in "Network Connections" Open Up your browser on your phone and wait for it to display a web page, and then minimize Start ICS choose "Bluetooth PAN" then click "Connect" Right Click on "Bluetooth Connections" Icon on windows toolbar, and choose "Join A Personal Area Network" It should show up as an access point, if not click add and search for it. Once it shows as an access point Click "Connect" Drive...ON:coffee: |
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
Sonic, or Hoover, Do you know what registry changes are made by the InternetSharingFIX.zip cab. Besides: HKLM/Comm/InternetSharing/Settings --> ForceCellConnection [String value = "Phone as Modem"] -> "Sprint PCS" Drive...ON:coffee: |
Re: Tethering Touch with WM6.1. Step by Step instructions
Thanks for the info everyone :)
One question: Does ActiveSync have to be installed on the PC for this to work? |
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
You can download either one here: http://www.microsoft.com/windowsmobi...e/default.mspx |
Re: Tethering Touch with WM6.1. Step by Step instructions
I'm running NFSFAN's ROM and I thought the .cab was included. When I follow the directions above internet sharing says "Check Cable Connection" and my laptop tries to search for a driver...
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
Sounds like the ISF FIX cab was not part of the rom. Use a registry editor to see if the registry entry below is set to "Sprint PCS". If not then the rom does'nt include the ISF FIX. HKLM/Comm/InternetSharing/Settings --> ForceCellConnection [String value = "Phone as Modem"] -> "Sprint PCS" Drive...ON:coffee: |
Re: Tethering Touch with WM6.1. Step by Step instructions
does anyone know how to tether with bell? reg edits?
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Hello, downloaded cab followed all instructions , PAM connects throu "sprint pcs" but "check usb cable conn.." Is all I get. Like my pc won't detect my phone ?? How do I connect to pc with activesync off?
Thanks, u guys rock |
Re: Tethering Touch with WM6.1. Step by Step instructions
Quote:
ICS creates a LAN type connection between the phone and a computer. It does not use the Phone as a Modem. Should just be able to: Turn off Wi-Fi on computer, or disable it in "Network Connections" Open Up your browser on your phone and wait for it to display a web page, and then minimize Plug USB cable into Phone, but not into computer yet. Start ICS on phone choose "USB" then click "Connect" Plug USB cable into computer ICS Network should be established Start computer browser... And Surf...ON:rr::computer: Drive...ON:coffee: |
Re: Tethering Touch with WM6.1. Step by Step instructions
I Had the phone tethering for a day or so, But now when I try I get an Error code 67 saying that my username and password is wrong.
Any ideas? PS when it did work, It was amazing!! I Dont get wireless on my desktop here at my dorm and this thing rocked |
Re: Tethering Touch with WM6.1. Step by Step instructions
Same error here. Ran the fix, but I only ever get "Check USB Cable Connection". Does anyone have more details on this 'fix'? The "should" doesn't work since it's giving the USB Cable error. Where's this PAM DUN setup that needs edited?
Quote:
|
Re: Tethering Touch with WM6.1. Step by Step instructions
Where did you download that "fix" from?
|
All times are GMT -4. The time now is 06:56 PM. |
Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com