Rev a question

tri0xinn · #1 (**permalink**) 07-09-2008, 12:55 PM

supposedly rev a is available here in Eugene, Oregon.. but should the little icon say rev a on the touch.. says "ev" .. my speeds are about 100kb a sec.. a megabyte every 8 to 10 seconds.. does this sound right for rev a?

zeurx · #2 (**permalink**) 07-09-2008, 02:07 PM

dial ##debug and go to the HDR page, if you see anything above 2400 kbps(This is the best i've gotten in Rev 0) then its rev a, exceptions are if your in a low signal area then the speed will decrease

DaPeeps · #3 (**permalink**) 07-09-2008, 03:58 PM

I am in a full signal area getting 1228 kbps in that HDR menu when I access a website. Should I be setting that RevA option in PST to Enable or disable? I have heard so much specualtion on both sides that im just not sure anymore.

zeurx · #4 (**permalink**) 07-09-2008, 04:14 PM

with the new sprint rom and pri people have been saying disable softreset, enable softreset and it should work.

DaPeeps · #5 (**permalink**) 07-09-2008, 04:26 PM

ok yah now its saying 2457.600 kbps (it was set to disable.....I set to enable and reset)

BlkCat · #6 (**permalink**) 07-09-2008, 05:29 PM

Quote:

Originally Posted by zeurx

with the new sprint rom and pri people have been saying disable softreset, enable softreset and it should work.

Unfortunately this didn't work for me. I'm pretty sure I'm in the Sprint RevA area but I can't find a place to help (the sprint coverage map didn't say anything about RevA).

neogeek · #7 (**permalink**) 07-09-2008, 05:36 PM

when you say disable softreset, enable softreset, what are you talking about?

Flakmunkey · #8 (**permalink**) 07-09-2008, 05:37 PM

Quote:

Originally Posted by scottsimon1979

I am in a full signal area getting 1228 kbps in that HDR menu when I access a website. Should I be setting that RevA option in PST to Enable or disable? I have heard so much specualtion on both sides that im just not sure anymore.

wait, where in that page do i do this?? im lost

LuLuTheMonk · #9 (**permalink**) 07-09-2008, 05:57 PM

##778#
Edit
Enter your MSL
View info -> Data Paramters
Select Rev. A
Menu -> Edit

mclife · #10 (**permalink**) 07-09-2008, 05:58 PM

Quote:

Originally Posted by zeurx

dial ##debug and go to the HDR page, if you see anything above 2400 kbps(This is the best i've gotten in Rev 0) then its rev a, exceptions are if your in a low signal area then the speed will decrease

I can't seem to get to this HDR menu. You just go to the dialer and dial ##33284 and it should come up? I too am trying to verify if I am getting max speeds possible. Fastest I've gotten is around 900kbps.