My Vouge is CDMA..w/ a GSM housing :0)

[Canadiantsi]

In Canada Bell Offers the Touch in a White Case.

[grashoper]

Originally Posted by Canadiantsi

In Canada Bell Offers the Touch in a White Case.

I was sitting here scratching my head wondering why he was doing this. lol
I didn't realize us Canucks were the only ones that had the choice of White, Black, or Green cases when we bought our phones. Kinda neat. I feel kinda special now.

[ckl_88]

Originally Posted by grashoper

I didn't realize us Canucks were the only ones that had the choice of White, Black, or Green cases when we bought our phones. Kinda neat. I feel kinda special now.

Say what? You mean I can walk into my Bell Store and get a new casing in these colors? I thought it only came in white and the bell blue.

[Brera]

Check the first post for a sad happening :0(

Originally Posted by Red49er

So how do you like the smooth plastic feel to the rubberized Vogue feel? I've always preferred my rubbery vogue to the feel of the Mogul, but I haven't touched any of the GSM Touch housings.

I like this plastic one so much better

Originally Posted by Primenall

Yeah I was hoping to see some also, and wondering if there are any camera issues.

Because on the Cdma version, the camera self-protrait disk is offset to the left compared to the gsm version that has it right on top.

So Brera....does the camera fit in the housing correctly and take correct pictures that aren't tilted ???

Didnt really check the cam orientation, I honestly NEVER use my cam. Sorry buddy.

Originally Posted by riironman

since you have it in the gsm case..will the extend batteries fit?

Extended batteries should fit no problem.


As Far as step by step instructions go, it was kinda trial and error, but this is pretty much what I did:

Remove housings from CDMA touch

Removed buttons (power,cam,volume slider)

Remove board.

Removed plastic screen from CDMA front housing (with touch screen ribbon attached **BE CAREFULL TO NOT BEND THE COPPER TIPS!! This ribbon does not "un clip" at the white boxing on board, the ribbon simply pulls out**)

Set screen and touch screen ribbon (including green/red/dpad hard keys) into new GSM housing(you have to RE-adhesive the border of the screen into the housing..super glue is fine..but thin coats,so you dont have overrun onto the screen)

Carefully re-insert ribbon

Remove earpiece speaker from CDMA housing ,place into GSM cabinet. Be sure to face the gold prongs the correct direction or you will not beable to hear through this device correctly!

Manipulate button arms (power, cam) to fit securly into new GSM middle housing (arms must sit flush into cabin so the board will be allowed to sit flush as well

*heres where the rigging starts!*The volume sliders arms will not reach the volume tab in the new casing, either you lose function, or you can do as i did and glue "extensions" onto either the slider or the actual key (recommend the slider)

Take your CDMA board and shave it down,stopping half way down the gold stripe that lines the board(do not shave completely through the gold liner) on the left hand corner, top, and right hand corner. *This allows the board to now fit correctly into the GSM cabinet!

Match up the new GSM cabinet (middle black housing) and board.
Using a burning kit (I used a pencil tipped woodburner), cut away at any plastic that stops your board from sitting flush. Be sure to smooth and flatten the burned areas, extra and burned plastic can build up ,creating new bulky areas.

Reassemble phone. (Make sure screws are tight,but because of over tighting and stripping)

Turn on and test!!!!!

I hope this helps.... is the scale tip worthy? Im not sure, but I guess I'll find out!

[DHarvey]

Originally Posted by Brera

As Far as step by step instructions go, it was kinda trial and error, but this is pretty much what I did:

That actually doesn't sound that difficult but I think I will just stick with the black OEM housing as that just seems like a lot of work and I am one of those "stereotypical lazy americans"

[Brera]

Originally Posted by dharvey4651

That actually doesn't sound that difficult but I think I will just stick with the black OEM housing as that just seems like a lot of work and I am one of those "stereotypical lazy americans"

LOL I hear yea, it was a little bit of work when u get down to cutting and retro fitting,cause one slip up and your phoneless haha.

But I'm a Sterio-typical unsatsified ,untill I get what I want, Italian. haha

[magicalan]

sorry but your gf is hot

[detroit_doug]

Originally Posted by magicalan

sorry but your gf is hot

ROFL - cold to poke around someones myspace folders ... but accurate though

LOL


Detroit Doug

[magicalan]

Originally Posted by detroit_doug

ROFL - cold to poke around someones myspace folders ... but accurate though

LOL


Detroit Doug

he posted his myspace... i had no choice

[Red49er]

So how do you like the smooth plastic feel to the rubberized Vogue feel? I've always preferred my rubbery vogue to the feel of the Mogul, but I haven't touched any of the GSM Touch housings.