Phone always off: Wireless radio off

[pook13]

I did downgrade my radio from 3.42.50 to version 1.x using SPL 0.41
like someone's thread on xda to get standalone GPS.
Now I have an issue, seems like as u said, some portions of radio aren't overwritten.here some symptoms I got :
1. when booting, WM6 said "Phone Off". in comm manager its status is Flight mode. when I turned on the phone, a pop up shown "Phone is off, do you want to turn it on?" I press yes, but the radio shown no signal. when I tried to make call, phone was turned off again. Can't make any calls at all.
I try with some of official and customize rom.Result is the same.

2. when I enter EPST ##778 and make some changes and then press OK, it said "Turn on LPM failed. Press OK to reset device".
Software and Firmware version can't change
It still 3.09.666.1 and radio rom is 3.42.50.
CDMA setting/EPSt show the item "EVRC enabled" is out of range.
EVRC Enabled: Disabled
Home page: Wild
Home Orig: EVRC
Roam Orig: .......
Can't change anything...It will stop with Written Item "..." error

3. when I use QPST to make PRL changes then press Write to phone, the gauge bar showed 100% but then the device automatically reset (soft). The QPST then showed message something like "Writing process not finished".Same problem shown when I tried to back to 3.42.50 with SPL 2.31.

So, any ideas to help this noob?
Thanks a lot

I am quote this word form
edimonoarfa
http://forum.ppcgeeks.com/showthread.php?t=26082
Dangers of downgrading after installing GPS radio (and a little on signing)

Please help me...
I try to solve this problem for a week.
I read in this forums and xda.., I couldn't find the solution.

Right now,
Everything work well,
EPST is work well after I follow instruction from "horndoctor"
Except it can't turn on the phone
Phone sign shows in No Service.

Phone still off, and can't get it on

[shaggylive]

did you flash via activesync using the exe? that should get you back to normal..
typically a rom flash will not change anything in epst, radio info being an exception.

[pook13]

Originally Posted by shaggylive

did you flash via activesync using the exe? that should get you back to normal..
typically a rom flash will not change anything in epst, radio info being an exception.

I already did it.
There is nothing change.

I think something in EPST/ CDMA setting has broken.
I can't edit this page. It always error.
What should I do next?

[pook13]

I live in Thailand,so my carier is hutch.
Thank yoo for your attention.

I bought this one form E-bay with logo sprint. I try to flash with this rom
"RUU_Vogue_SPRINT_WWE_1.12.651.1_2.13.00_SPC_NV133 _Ship"
This one is the oldest rom that can be downloaded from internet.
Like I said there is nothing changes. My phone still brick.

[horndoctor]

OK, I think this is the rom you need:

http://rapidshare.com/files/10189272..._Ship.exe.html

Even though your vogue is sprint branded, I think you should flash this one for Hutch because I doubt a sprint radio would work where you are. I hope you can flash it. Remember to let customizations run after you flash it so your carrier provisioning will be set right. Hard reset after you flash and let customizations run again. Good Luck!

[pook13]

Originally Posted by horndoctor

OK, I think this is the rom you need:

http://rapidshare.com/files/10189272..._Ship.exe.html

Even though your vogue is sprint branded, I think you should flash this one for Hutch because I doubt a sprint radio would work where you are. I hope you can flash it. Remember to let customizations run after you flash it so your carrier provisioning will be set right. Hard reset after you flash and let customizations run again. Good Luck!

Thank in advance,
I flashed it, EPST is quiet better.
Anyway, Phone still off.....
T_T

[pook13]

Thank in advance,

I flashed it, and now everything in EPST is fine.

Phone still off with no signal....

T_T

[whitey10tc]

I'm really confused

What exactly are you trying to do?

Has the phone worked before on your account?

What have you done to mess it up? and be honest no body will look at you different.

Does it have a current PRL for Hutch on the device?

What radio does it say in the red letters on the boot screen, and in the device info?

What SPL is it showing currently?

[pook13]

Sorry for my poor English,
I will try to make u understand.

1. I take my phone back to normal
2. My phone has been worked befor I flash down back to rom "Non-GPS"
3.
What have you done to mess it up? and be honest no body will look at you different. >>>I don't understand what you mean

4.I have PRL for Hutch and successfully load it to my phone,but it doesn't work

5.Right now, [original radio from Hutch]
There is
P ACAAAAM-4070
R 1.68.00
D 1.12

6.PRL ID is 02007 from Hutch rom


Right now,
Everything work well,
EPST is work well after I follow instruction from "horndoctor"
Except it can't turn on the phone
Phone sign shows in No Service.

If the phone is normal, it should connect with CDMA crrier [Hutch Server:
2000 1X CDMA]

Thank you for your attension..
Plz apologize for me if u get confuse for my words.

Originally Posted by whitey10tc

I'm really confused

What exactly are you trying to do?

Has the phone worked before on your account?

What have you done to mess it up? and be honest no body will look at you different.

Does it have a current PRL for Hutch on the device?

What radio does it say in the red letters on the boot screen, and in the device info?

What SPL is it showing currently?

[pook13]

Dear Guys[Horndoctor, Whitey10TC and all.. ]
I did what you recommend to do, the phone still off.
Here is some picture I capture from my phone






I did hard spl to 2.31Coke and flash to Radio rom 3.42.50, then flash to customize NFS final rom.