http://pdaphonehome.com/forums/htc-t...tml#post681442
From Elkay in the 6700 forum
Force EV-DO/1X, quicker ring response
--------------------------------------------------------------------------------
I would put these in the tips and tricks section, but that thread is going to get long and these two questions are already far too common, so here's a thread with a quick answer that will be easily SEARCHABLE (hint, hint!).
To do this, you will need your MSL, which only Sprint (or your provider) can provide you. Open up the phone app and dial ##778# (PST). You will be asked to enter your MSL. Enter it, and you will be brought into the provisioning of your phone. From the top left, select Modem Settings. On this page, your Slot Cycle Index (SCI) is how often your phone polls the tower for incoming calls, etc. This value is 1.28 seconds multiplied by 2^value (i.e 0=1.28 secs, 1=2.56secs) with 0 fastest, 7 slowest. The default is 2, but lowering it to 1 hasn't noticeably affected my battery life, and roughly 2.5 second (SCI 1) response time is far more reasonable than roughly 5 seconds (SCI 2).
Also on this page is your preferred operation mode. The Default is Automatic, which is the best available mode (EV that will roll back to 1X when EV is unavailable). There are times when you might be in a fringe area and your mode may cycle frequently and this can seriously drain your battery. Setting this to HDR will force EV-DO only if you demand an EV-DO connection. Changing this setting to CDMA Only will force the phone to ignore an EV-DO tower and maintain only a 1xRTT connection.
Hope this helps you all out!
THIS REG HACK WAS ON, PDAPhoneHome.com THANK'S TO (i4edge) converged slap happy
Join Date: 10-07-2005
Location: Denver, Co
PDAPhone: Sprint Touch
02-25-2008, 09:08 PM
Linear Mode
