Registry Tweaks/Hacks/Edits - Share them here!

[tspinning]

I have noticed an increase in speed, as hoped for with the reg tweak- Thanks Primenall!!


PMAClean- I was unable to do the reg edits via CERegEditor, however using Total Commander (on device) I was able to make the changes.


**EDIT** info on getting your MSL

I found this, (posted by a PPCgeeks fellow I believe) at another forum, and it might work w/ our HTC Vogues although I HAVE NOT TESTED it at this time

Originally Posted by hpnasik
I was playing about with my Sprint Mogul and found a couple of ways to get your MSL... They basically both get it the same way, just take different routes to get there.

Two different ways to get MSL:

Method A:

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r

* The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows.




Method B:

* Start your favorite pocket-pc terminal program (like pocketPutty - http://www.pocketputty.net/)
* Connect to com9 (Putty used default speed of 9600)
* type in AT+HTC_RMSL=0 and hit enter, your MSL will be displayed.
* Soft reset to restore phone functionality

Let me know if it works for you...

Thanks,

Geoff (gZUB @ PPCGEEKS)
__________________________________________________ _______________

I used pocketputty to open a connection on com9 (serial) and was able to querry the msl with the string at+htc_rmsl=0 (input using the PASSWORD keybord, then I switched to the standard wm6 keyboard to hit enter)

[nsievers]

Originally Posted by tspinning

Two different ways to get MSL:

Method A:

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r

* The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows.

Thanks, this worked for me! Except one difference is that the file was not place in a Temp directory, instead it was placed in \Atlog. This was on a Sprint Touch.

[Touch_Pete]

Originally Posted by tspinning

Method B:

* Start your favorite pocket-pc terminal program (like pocketPutty - http://www.pocketputty.net/)
* Connect to com9 (Putty used default speed of 9600)
* type in AT+HTC_RMSL=0 and hit enter, your MSL will be displayed.
* Soft reset to restore phone functionality

Let me know if it works for you...

I tried this and I got my MSL but a reset and my phone would not accept incoming calls, so I did it again only this time I input the MSL I got from the first run through in place of the 0 in this line

AT+HTC_RMSL=0

and reset and presto everything was back again.