Thanks very much! I knew I saw it somewhere.

Does anyone know how to change the on screen response time for the dial pad??? I am not talking about how quickly it actually dials the numbers, but instead how quickly it can "flash" the number you pressed.

I know pocketcm has a setting to change how quickly the on screen response is activated. I would really like the dial pad to respond a little quicker as sometimes Im not sure if it accepted my keystroke without looking at the phone number being displayed at the top.

So to clarify, lol, does anyone know how to make the number pad flash quicker when pressed during dialing?

I know with my 6700, it got really slow if my call log got too large. Try erasing your current call log and see if it helps.

My Sprint Touch was already set to 8192 but when I tried to change to 16384 I received error, "Access Denied." How do I get around this?

Does anyone know how to change the ESN?

Are you using a desktop reg editor? That is the only time I have gotten that error. If you use PHM RegEdit you should be able to to roll with the issues.

Is there a reg edit to make the photo bigger for caller id when someone calls. I mean you think it could be a little bigger than a half inch square

The problem has something to do with the audio. I posted a solution earlier in the forum:

how to change the backround on the dialer

what are the registry tweaks foe the vista dialer

Replace the .PNG files in the ROM located in the \Windows folder to the ones you want.

I'm currently using the Tropical Fish Attitude skin for my dialer:

http://forum.actualitemobile.com/ind...pic,238.0.html

http://cdesign33.free.fr/ppcd/TFD.png

I saw a red hack that made time for when you slide the 6800 open quicker. i have looked all over and can not find it again. does anyone have this?

This edit will change the time between pressing the "End Key" and actually ending the call. It is originally 3 seconds, and you can change it to any number, including 0 for NO DELAY

HKEY_LOCAL_MACHINE
Software
HTC
PHONE
PhoneExtendSetting <<-- YOU WILL HAVE TO ADD THIS KEY

ADD the dword EndCallTime and make the value 1000 (one second) or 0 (no delay)

Cool, thanks for this.

Does anyone know what is flashed when you run VistaHide Battery?

I have decided to not use the program but can't determine what it added and where to remove it.

Bump - anyone?????

I wish it was as easy as an uninstall....

As far as I remember, since I don't use that app anymore, that you don't have to "uninstall" anything. Isn't it just an .exe file? All you have to do is delete it from your device.

My understanding is that there is no "install", there's just the .exe itself. Delete that, and any shortcuts you might have created yourself, and you should be good.

Does anyone know if there is a way to show battery in % instead of bars on top bar or anywhere on the screen?

SPB MOBILE SHELL?
I think that will give you what you ask.

http://www.spbsoftwarehouse.com/prod...nshots.html?en

Can someone cab up the 40 key keyboard hack.. I don't care about the xt9. I have all the files but the instructions are to vague

PLEASE PLEASE PLEASE

For some reason, this is not working for me. Are there any settings I need to change in order to get the vibrating keypad to work?

you need to install the cab and then do a reboot

I did a soft reset immediately following the install and another after I installed a 2nd time.:(

Do you have the tones set to short tones? Those are the files that are changed with the cab. BOO

Yeah, that was my problem. Thanks!

I hate it when I have to press the left "green" button pretty hard to make a call or press the right "red" button pretty hard to end a call. Is there a tweak somewhere to fix this to make it more sensitive?

Ok so now to get it permenantly removed from my startup directory so it doesn't auto-load everytime I reset the phone. Let the search continue...

not positive but i believe there is just a delay on it and there is a reg tweak for it here on ppcgeeks just search it out and try. it's that or just sticky keys

Im using Pocket informant and need a registry hack to default back to the 6900 original contact page. Ive seen this reg hack before but can not find it.

yea i am sure there is a reg hack somewhere. i've looked at the reg hack threads but i do not see it listed anywhere.

For Some Reason, This Helps My Touch Pick/hang Up Faster.
 

http://pdaphonehome.com/forums/htc-t...tml#post681442


From Elkay in the 6700 forum

Force EV-DO/1X, quicker ring response

--------------------------------------------------------------------------------

I would put these in the tips and tricks section, but that thread is going to get long and these two questions are already far too common, so here's a thread with a quick answer that will be easily SEARCHABLE (hint, hint!).

To do this, you will need your MSL, which only Sprint (or your provider) can provide you. Open up the phone app and dial ##778# (PST). You will be asked to enter your MSL. Enter it, and you will be brought into the provisioning of your phone. From the top left, select Modem Settings. On this page, your Slot Cycle Index (SCI) is how often your phone polls the tower for incoming calls, etc. This value is 1.28 seconds multiplied by 2^value (i.e 0=1.28 secs, 1=2.56secs) with 0 fastest, 7 slowest. The default is 2, but lowering it to 1 hasn't noticeably affected my battery life, and roughly 2.5 second (SCI 1) response time is far more reasonable than roughly 5 seconds (SCI 2).

Also on this page is your preferred operation mode. The Default is Automatic, which is the best available mode (EV that will roll back to 1X when EV is unavailable). There are times when you might be in a fringe area and your mode may cycle frequently and this can seriously drain your battery. Setting this to HDR will force EV-DO only if you demand an EV-DO connection. Changing this setting to CDMA Only will force the phone to ignore an EV-DO tower and maintain only a 1xRTT connection.

Hope this helps you all out!

THIS REG HACK WAS ON, PDAPhoneHome.com THANK'S TO (i4edge) converged slap happy

Join Date: 10-07-2005
Location: Denver, Co
PDAPhone: Sprint Touch

wow truelight, that looks very cool, i'm going to call and get my MSL and set this I think, I noticed the delay from my old cell phone in the time it takes when someone calls me and was wondering what caused it!

(I sometime do helpdesk type support from home, and have our ACD route calls to the cell, but had my callers hanging up because of the ring delay)

Great! I was looking for that SCI info. I've missed so many calls cause of it. Does that affect incoming messages also?

does anyone have the reg hack to make ring volume for Touch louder?

You must be a old senile man. Touch ringer is really loud enough..

Funny, but true, my ringer is so loud on high it scares the crap out of people sometimes. :mrgreen:

yes it scares me sometime also i just remember reading it somewhere here did the reg tweak for it. i am doing a bit of testing to see if there is a difference when i tweaked it in comparison to a OEM phone.

hmmm... ok so i emailed sprint and they gave me my MSL through email... but isn't it supposed to be 6 digits? she gave me a 5 digit number. am i missing something?

EDIT: nvm... it is 6 digits... i just added 1-9 to the end (which didn't work), and then 1-9 to the beginning.... and found that she didn't type the 2 haha

PS EDIT: i applied the SCI tweak... and this is the best tweak/hack for the Vogue so far! great find guys!

How can I change my default KB to TouchPal