Originally Posted by jimmy8125 (Post 919629)

how did you get the internet to work in the
Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks

Originally Posted by DumbDumb (Post 535057)

First let me say this was hard work to figure out! THANKS to KAREEM FOR THE HELP!!!
OK this is how to get wap and mms on the HTC VOGUE on metro!!!!
please sticky!!!!

WAP

1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.

NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.

2: Rename the following files and folders:

Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD

NOTE: renaming the IOTA folder is probably all that is needed however I found the files as well and renamed them for good measure and haven't had a problem.

3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.

4: Set the following values:

M.IP Settings:
MIP_MODE = Simple IP Only

M.IP Default Profile:
NAI = yourtendigitphonenumber@mymetropcs.com
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)

Security:
HDR AN AUTH User Id = yourtendigitphonenumber@mymetropcs.com
PPP USER ID = yourtendigitphonenumber@mymetropcs.com
PPP PASSWORD = metropcs

5: Goto Connections and delete any existing connections and setup a new one using the following settings:

Number to dail = #777
Username: yourtendigitphonenumber@mymetropcs.com
Password: metropcs
Domain: (Leave Blank)

Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)

6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.

Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.

MMS

MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!

Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.

1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.

3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.

4: Add a new server with the following settings:

Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K

5: Click "Done" and then set the new server as default.

6: Using a Registry Editor edit the following values:

[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]

DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )

Originally Posted by DumbDumb (Post 535057)

First let me say this was hard work to figure out! THANKS to KAREEM FOR THE HELP!!!
OK this is how to get wap and mms on the HTC VOGUE on metro!!!!
please sticky!!!!

WAP

1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.

NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.

2: Rename the following files and folders:

Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD

NOTE: renaming the IOTA folder is probably all that is needed however I found the files as well and renamed them for good measure and haven't had a problem.

3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.

4: Set the following values:

M.IP Settings:
MIP_MODE = Simple IP Only

M.IP Default Profile:
NAI = yourtendigitphonenumber@mymetropcs.com
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)

Security:
HDR AN AUTH User Id = yourtendigitphonenumber@mymetropcs.com
PPP USER ID = yourtendigitphonenumber@mymetropcs.com
PPP PASSWORD = metropcs

5: Goto Connections and delete any existing connections and setup a new one using the following settings:

Number to dail = #777
Username: yourtendigitphonenumber@mymetropcs.com
Password: metropcs
Domain: (Leave Blank)

Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)

6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.

Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.

MMS

MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!

Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.

1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.

3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.

4: Add a new server with the following settings:

Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K

5: Click "Done" and then set the new server as default.

6: Using a Registry Editor edit the following values:

[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]

DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )

Originally Posted by tosh1 (Post 1059720)

That is a bit weird. That VZW key is usually always there, but you might have gotten a coyp of arcsoft that someone may have deleted it for you already. Just put those two new string values WITHOUT THE ().

so it will read like this: X-metropcs-MDN and X-DEVICE-MIN

remember the MIN string will have the 1 in the front of the number and the MDN will not have the 1 in the front.

Also if your MIN is different when programming your phone, put the MDN number instead even though that string states MIN.

Good luck.