PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Vogue Development (http://forum.ppcgeeks.com/forumdisplay.php?f=59)
-   -   Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!! (http://forum.ppcgeeks.com/showthread.php?t=45988)

DumbDumb 11-21-2008 10:31 PM
Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
First let me say this was hard work to figure out! THANKS to KAREEM FOR THE HELP!!!
OK this is how to get wap and mms on the HTC VOGUE on metro!!!!
please sticky!!!!

WAP

1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.

NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.

2: Rename the following files and folders:

Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD

NOTE: renaming the IOTA folder is probably all that is needed however I found the files as well and renamed them for good measure and haven't had a problem.

3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.

4: Set the following values:

M.IP Settings:
MIP_MODE = Simple IP Only

M.IP Default Profile:
NAI = yourtendigitphonenumber@mymetropcs.com
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)

Security:
HDR AN AUTH User Id = yourtendigitphonenumber@mymetropcs.com
PPP USER ID = yourtendigitphonenumber@mymetropcs.com
PPP PASSWORD = metropcs

5: Goto Connections and delete any existing connections and setup a new one using the following settings:

Number to dail = #777
Username: yourtendigitphonenumber@mymetropcs.com
Password: metropcs
Domain: (Leave Blank)

Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)

6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.

Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.

MMS

MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!

Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.

1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.

3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.

4: Add a new server with the following settings:

Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K

5: Click "Done" and then set the new server as default.

6: Using a Registry Editor edit the following values:

[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]

DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )


Code:
http://rapidshare.com/files/166154036/HTC_VOGUE_METRO_WEB_MMS_SETTINGS.rar.html

dp13 01-09-2009 06:21 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
The file is not there...can someone repost it?

mrh2jz 01-13-2009 01:55 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
hi i have a htc touch with metro and i found the gaurdian file .but i cant seem to find the iota files ..and i also tried this [Open your phone and enter ##778#, select "EDIT" and enter your unlock code.] but seem not to work can sum 1 please help wth this...

cellrepairus 01-13-2009 11:18 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
i tried intsalling the verizon arcosoft and keep getting this error

installation of GC VZW arcosoft MMS 5.0.70.24.cab was unsuccessful.

internet is working , this is a HTC 6700, rom 2.06, radio 1.27

](*,)

tiffaneys 01-17-2009 11:03 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
I have been searching and searching on how to get my mms working on my htc mogul. I got the internet working but now I am working on my mms. I've never worked with the registry before and it says to delete and add strings. I know this may be a dumb question but are we deleting and adding to the directory? I think thats why I cant get it working because everything else is exactly the way it should be.](*,)

affliction 02-27-2009 05:41 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
the metro pcs forums on www.howardforums.com is a great place to start your htc flashing experience to metro pcs...

camastha 03-19-2009 02:31 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
can some one post the unlock code, i tried 000000 but did not work, and by the way if ##778# dont open EPST, go to \windows\EPST.lnk and launch it from there... please help me with the unlock code... i would apreciate it lots..

dbell34 03-23-2009 08:24 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.

NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.

2: Rename the following files and folders:

Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD

NOTE: renaming the IOTA folder is probably all that is needed however I found the files as well and renamed them for good measure and haven't had a problem.

Where do you find these files on the phone? I have been looking for a couple of days now and have not found them. They are not in the windows folder. Also is there any rom that will bypass changing these files and get internet/mms working? Thanks in advance!

nate.spangler 04-03-2009 03:27 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
i have followed all the instructios but still get a wrong user name or password. everytimei try to connectthe logon to server comes up and has the user name filled out password is blank and the save password is unchecked.

eldigge 05-15-2009 02:39 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
thank you i finnally got the gottamn mms and pic mess to work i been trying since wensday it took me a couple days just to get the internet i guess im just sloowww:headbang:

jimmy8125 05-17-2009 12:45 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
how did you get the internet to work in the
Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks

jimmy8125 05-17-2009 12:46 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Quote:
Originally Posted by jimmy8125 (Post 919629)
how did you get the internet to work in the
Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks
i cant get the http to save i can get my email but i cant get the web to work

jimmy8125 05-17-2009 01:18 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Quote:
Originally Posted by DumbDumb (Post 535057)
First let me say this was hard work to figure out! THANKS to KAREEM FOR THE HELP!!!
OK this is how to get wap and mms on the HTC VOGUE on metro!!!!
please sticky!!!!

WAP

1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.

NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.

2: Rename the following files and folders:

Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD

NOTE: renaming the IOTA folder is probably all that is needed however I found the files as well and renamed them for good measure and haven't had a problem.

3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.

4: Set the following values:

M.IP Settings:
MIP_MODE = Simple IP Only

M.IP Default Profile:
NAI = yourtendigitphonenumber@mymetropcs.com
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)

Security:
HDR AN AUTH User Id = yourtendigitphonenumber@mymetropcs.com
PPP USER ID = yourtendigitphonenumber@mymetropcs.com
PPP PASSWORD = metropcs

5: Goto Connections and delete any existing connections and setup a new one using the following settings:

Number to dail = #777
Username: yourtendigitphonenumber@mymetropcs.com
Password: metropcs
Domain: (Leave Blank)

Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)

6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.

Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.

MMS

MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!

Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.

1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.

3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.

4: Add a new server with the following settings:

Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K

5: Click "Done" and then set the new server as default.

6: Using a Registry Editor edit the following values:

[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]

DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )


Code:
http://rapidshare.com/files/166154036/HTC_VOGUE_METRO_WEB_MMS_SETTINGS.rar.html
ok i did this one thing i didnt do is remove becouse i didnt no how HTC_CM_Guardian but i did the rest but i cant get the web to work i can get my email to come in but thats it and the next thing is in the proxy setting i cant get the http to save can someone help

Randy954 05-19-2009 03:08 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Will these steps work with the htc diamond? And im not using the sprint rom currently.. Do I need to go back to the sprint rom before trying these steps?

porto35 05-24-2009 05:24 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.

3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.

4: Add a new server with the following settings

Everywhere I search, they always said that I have to ADD NEW MMS for Metro PCS but when I go to my phone Message, Menu, MMS option to add, the Add NEW button is disabled (gray out). Where can I find the place to ADD the NEW MMS for METROPCS. Only Verizon connection is there

dianakcv 07-25-2009 01:06 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Quote:
Originally Posted by DumbDumb (Post 535057)
First let me say this was hard work to figure out! THANKS to KAREEM FOR THE HELP!!!
OK this is how to get wap and mms on the HTC VOGUE on metro!!!!
please sticky!!!!

WAP

1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.

NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.

2: Rename the following files and folders:

Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD

NOTE: renaming the IOTA folder is probably all that is needed however I found the files as well and renamed them for good measure and haven't had a problem.

3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.

4: Set the following values:

M.IP Settings:
MIP_MODE = Simple IP Only

M.IP Default Profile:
NAI = yourtendigitphonenumber@mymetropcs.com
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)

Security:
HDR AN AUTH User Id = yourtendigitphonenumber@mymetropcs.com
PPP USER ID = yourtendigitphonenumber@mymetropcs.com
PPP PASSWORD = metropcs

5: Goto Connections and delete any existing connections and setup a new one using the following settings:

Number to dail = #777
Username: yourtendigitphonenumber@mymetropcs.com
Password: metropcs
Domain: (Leave Blank)

Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)

6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.

Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.

MMS

MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!

Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.

1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.

3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.

4: Add a new server with the following settings:

Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K

5: Click "Done" and then set the new server as default.

6: Using a Registry Editor edit the following values:

[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]

DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )


Code:
http://rapidshare.com/files/166154036/HTC_VOGUE_METRO_WEB_MMS_SETTINGS.rar.html
HELLO!! well i've done the internet part, and it works perfect!

Now on the MMS I've downloaded the Arcsoft, and put the settings in exactly.

I opened the registry editor and when i went to the folder indicated,

the KEY to be deleted wasn't there...
Is this why it won't work?

I thought if it isn't there then it's good.
So i went on and put the other 2 strings in that folder.

Another question...are the parenthesis part of the value?

Anyways so what to do if the KEY to be deleted isn't there?

PLEASE ANYONE! thanks!:violent2:

tosh1 07-25-2009 06:49 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
That is a bit weird. That VZW key is usually always there, but you might have gotten a coyp of arcsoft that someone may have deleted it for you already. Just put those two new string values WITHOUT THE ().

so it will read like this: X-metropcs-MDN and X-DEVICE-MIN

remember the MIN string will have the 1 in the front of the number and the MDN will not have the 1 in the front.

Also if your MIN is different when programming your phone, put the MDN number instead even though that string states MIN.

Good luck.

dianakcv 07-26-2009 01:15 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Quote:
Originally Posted by tosh1 (Post 1059720)
That is a bit weird. That VZW key is usually always there, but you might have gotten a coyp of arcsoft that someone may have deleted it for you already. Just put those two new string values WITHOUT THE ().

so it will read like this: X-metropcs-MDN and X-DEVICE-MIN

remember the MIN string will have the 1 in the front of the number and the MDN will not have the 1 in the front.

Also if your MIN is different when programming your phone, put the MDN number instead even though that string states MIN.

Good luck.
thank you first of all for replying!

2nd, is there a newer version of the arcsoft thingy?
or does it have to be that one? because i think i remember seeing a newer one from sprint or something like that.

Ok so parenthesis don't go, got it.
My guess neither do the quotes right?

OH AND ANOTHER THING!

in step 1 and 2, the file htc_cm_guardian.Ink replaced by what dummy file?

and i found the files in step 2 to be renamed...would any software that as said can
overwrite/delete/rename Read-Only or ROM files will work?



1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.

NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.

2: Rename the following files and folders:

Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD


THANKS AGAIN~~!!

jason001125 07-26-2009 10:49 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
i dont know why mines still not working i have all the setting jus like it have layout with the but i get a error and also when i mms comes in .. it come in but it wont let me download the file or pic into my phone is coming is wrong or something im not doing correctly please help!!!!!!

jason001125 07-26-2009 10:54 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
and also my setting for my phone is working fine as the gps and texting and internet is working fun but jus not getiin the mms on thanks

affliction 07-31-2009 04:01 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
guys mms is very very easy if you want i know that the metro mafia has made a full cab file that will program your internet,install arcsoft, and write all registry edits.. surf on over to howardforums.com and you'll find it.. along with alot of other interesting metro info

alanpetri2000 08-21-2009 08:21 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
hey i need help on how to get the internet working for my htc touch pro i just flashed it to metro pcs and i only have call and texting please help me out on how to get it working thank you

vin255764 08-22-2009 12:25 AM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Somebody should write the similar TUT for verizon

krizno 01-11-2010 10:45 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Quote:
Originally Posted by affliction (Post 1072379)
guys mms is very very easy if you want i know that the metro mafia has made a full cab file that will program your internet,install arcsoft, and write all registry edits.. surf on over to howardforums.com and you'll find it.. along with alot of other interesting metro info
Thanks for the info on that much easier to get my mms to work already had Internet working also for others in Sacramento to San Fransisco as far as i know to get the net to work you also need these additional settings

These are the additional setting I needed (I use metro in the bay area)

under M.IP settings of the EPST:
MIP_MODE= "Mobile IP Preferred"

under the modem settings -> advanced menu (on User/PW screen)
uncheck "Use slip"
check "Use software compression"
uncheck "Use IP header compression"

pulled from .xda developers

davidhl3 01-12-2010 04:16 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
I have the sprint htc snap and I got it flashed to metro pcs but I cannot get the Internet connection set up. I followed the instructions in this posting however no luck. I set up the proxy and the connection settings but it keeps giving me error messages to check Internet settings. I also looked for the iota file and cannot locate it. Please help!!! Thanks

HeadBussa 02-24-2010 04:05 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Does anybody know how to make internet/mms working on android phones? I have HTC Hero (Sprint) and need to get web working, so I suppose the way it should be done for android phones is different.
Thanks!

Lmiller1708 02-24-2010 05:05 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Quote:
Originally Posted by HeadBussa (Post 1588216)
Does anybody know how to make internet/mms working on android phones? I have HTC Hero (Sprint) and need to get web working, so I suppose the way it should be done for android phones is different.
Thanks!
Try Looking over on the HTC Hero section... :)
http://forum.ppcgeeks.com/forumdisplay.php?f=114

HeadBussa 02-24-2010 11:08 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Looked over there, but nothing. A couple of similar threads and no solutions

viny0214 02-28-2010 03:01 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Quote:
Originally Posted by eldigge (Post 917176)
thank you i finnally got the gottamn mms and pic mess to work i been trying since wensday it took me a couple days just to get the internet i guess im just sloowww:headbang:


really dude how? I got ïnternet to work but no mms/sms

coleone13 04-10-2010 08:45 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Quote:
Originally Posted by onioneater36 (Post 3519937)
Depends on your carrier. Verizon and Cellcom (small carrier I am with) use 000000. Sprint uses a piece of software (GetSPL) that generates a random 6 digit MSL code based on your phone's ESN. That is why sprint users need GetSPL. I am not sure of other carriers. We should start a thread that looks like the following....
MSL Unlock Code
Verizon = 000000
Cellcom = 000000
Sprint = (Use GetSPL)
Alltel = ??????
AT&T = ??????
Feel free to fill in the blanks if you are with these (or other carriers)
Hope this helps

tekcomp 05-11-2010 02:47 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
Big Thanks for the OP, This worked perfectly on my HTC Diamond Touch flashed for MetroPCS. The key is to read the instructions throughly and do not miss a step.

keallisf 07-06-2010 05:15 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
I have a question for anybody that can help. I followed all steps in the first post and all went well...for a while. Now for some reason the internet is still working, but mms isn't. I'm currently using 'Energy' |Jun 2|21907|MaxSense. I'm running the same rom on two tp2s so I don't think it's just the rom
Help please!

p.s. I have used the cabs out there for this as well, but it hasn't fixed it.

Other than this problem it these settings have been such a great help, thank you so much to everyone that contributed to figure this out!

disher1 07-07-2010 02:05 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
All flashed phones period are now targeted by Metro pcs to stop data connection for msm or internet regardless of flasher(meaning legally or illegally.)So currently or shortly your flash phone will be only text & phone period!For more information on this Check Howard forum.

keallisf 07-12-2010 02:54 PM
Hopeful
 
Quote:
Originally Posted by disher1 (Post 1854919)
All flashed phones period are now targeted by Metro pcs to stop data connection for msm or internet regardless of flasher(meaning legally or illegally.)So currently or shortly your flash phone will be only text & phone period!For more information on this Check Howard forum.
I read that somewhere, but I believed that if that was happening the internet wouldn't be working as well as mms. I was playing with the phone that had a problem and I think I fixed it. I installed the Ryan Mogul's 'MMS Fix Metro WAP and Arcsoft5.2.3.22' cab (HUGE THANKS), then went in and changed the setting found at the start of this post from 'wap' to 'proxy' then restarted the phone. I was able to both send and receive picture on the phone that I have not been able to use MMS on for weeks. I've installed various cab files during those weeks, but this is the only thing that worked. It worked on both of my TP2s, hopefully this really is a fix and not a fluke

explisiv 11-08-2010 12:43 AM
Re: Hopeful
 
Quote:
Originally Posted by keallisf (Post 1862165)
I read that somewhere, but I believed that if that was happening the internet wouldn't be working as well as mms. I was playing with the phone that had a problem and I think I fixed it. I installed the Ryan Mogul's 'MMS Fix Metro WAP and Arcsoft5.2.3.22' cab (HUGE THANKS), then went in and changed the setting found at the start of this post from 'wap' to 'proxy' then restarted the phone. I was able to both send and receive picture on the phone that I have not been able to use MMS on for weeks. I've installed various cab files during those weeks, but this is the only thing that worked. It worked on both of my TP2s, hopefully this really is a fix and not a fluke

any problems since then?

Battlecreek 11-24-2010 10:37 PM
Re: Offical Web And MMS Setting For Metro Pcs!!! Please Sticky!!!
 
As some of you have realized by now, Metro Pcs Has Change Their Password and you can no longer access their web using the password "metropcs" , So Here's The Updated Web Settings.


1. Open your phone and enter ##778# Or ##778 Depending on Which ROM You Used, select "EDIT" and enter your unlock code.

2. Set the following values:

M.IP Settings:

MIP_MODE = Simple IP Only M.IP Default Profile:

NAI = yourtendigitphonenumber@mymetropcs.com

Home Address = 0.0.0.0 (just delete the values and save)

Primary HA Address = 0.0.0.0 (just delete the values and save)

Secondary HA Address = 0.0.0.0 (just delete the values and save)

Security: HDR AN AUTH User Id = yourtendigitphonenumber@mymetropcs.com

HDR An AUTH Password = Your 6 Digit MSL Number

PPP USER ID = yourtendigitphonenumber@mymetropcs.com

PPP PASSWORD = Your 6 Digit MSL Number

3. Goto Connections and delete any existing connections and setup a new one using the following settings:

Number to dail = #777

Username: yourtendigitphonenumber@mymetropcs.com

Password: Your 6 Digit MSL Number

Domain: (Leave Blank)

Select Proxy Settings and enter the following values:

wap.metropcs.net port:3128 (http)
Username = yourtendigitphonenumber@mymetropcs.com
PASSWORD = Your 6 Digit MSL Number

wap.metropcs.net port:3128 (wap)
Username = yourtendigitphonenumber@mymetropcs.com
PASSWORD = Your 6 Digit MSL Number

wap.metropcs.net port:443 (secure wap)
Username = yourtendigitphonenumber@mymetropcs.com
PASSWORD = Your 6 Digit MSL Number

wap.metropcs.net port:3128 (socks)

4. Back in the "Connections" screen where you have two tabs at the bottom of the screen of
"Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the
connection you just setup. Example if you leave as Sprint then choose that one as your internet connection
and do it for both settings.

NOTE: To Get Your MSL Number Go To "http://www.whiterabbit.org/android/"
And Type In Your 11 Digit ESN Number And Hit Calculate,
It Will Give You Your 6 Digit MSL Number, Use That For Your Password.


All times are GMT -4. The time now is 03:34 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0