Unbricking Vogue / and downgrading SPL

[mardukeme]

Originally Posted by Red49er

Yep, I got it off the link that was posted around page 2 or 3.

Red49er,

Not sure but maybe what Hoby did might work for you ussing mtty.
Which will allow you to run the unlocker and then run the Alltel rom.

[batman31]

UPDATE IN PROGRESS!!!! ==== YESSSSSSS!!!!!!

So as you pretty much have all figured out -

1. Make sure you use a 512 card (the one it came with)
2. Format it! (Reformat it again to FAT32)
3. Copy just that file (assuming you have sprint - into the card)
4. Get it to the loading screen... (it will freeze on that screen)
5. Copy the original stock Sprint ROM which you should have renamed to the microsd card
6. soft reset
7. You will now see update in progress and then eventually update complete!!

wheeeu - that was a close call - thanks to everyone!!!!

[mardukeme]

Originally Posted by batman31

UPDATE IN PROGRESS!!!! ==== YESSSSSSS!!!!!!

So as you pretty much have all figured out -

1. Make sure you use a 512 card (the one it came with)
2. Format it! (Reformat it again to FAT32)
3. Copy just that file (assuming you have sprint - into the card)
4. Get it to the loading screen... (it will freeze on that screen)
5. Copy the original stock Sprint ROM which you should have renamed to the microsd card
6. soft reset
7. You will now see update in progress and then eventually update complete!!

wheeeu - that was a close call - thanks to everyone!!!!

Glad to here you got it going, another one saved.

[Red49er]

How do I use the mtty program? Is there a tutorial somewhere?

[mardukeme]

Originally Posted by Red49er

How do I use the mtty program? Is there a tutorial somewhere?

Not sure it's been a while, ask Hoby in a few post back he just used it on the Vogue.

[hoby]

I was able to successfully flash back to the stock rom rip for vzw.... flashing in progress!

[Red49er]

Hoby, where'd you find the info on the mtty?

Edit: Alright, I found the mtty program, and I ran the two commands that hoby did, we'll see if it works, but right now it doesn't look any different than before.

[hoby]

I used the cmds from the following post...


http://forum.ppcgeeks.com/showpost.p...2&postcount=98


Once I did that, I was booting back into WinMo 6.1, and then I downgraded unlocker, and then was able to flash back to default OS with the storage card.

[Red49er]

I see....so what you used mtty to do I had already done. This is rotten :/

[Red49er]

Could you post the default OS nbh file you used?