Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS) - Page 46

KINYA · #**451** (**permalink**) 08-07-2008, 07:11 PM

i got the phone where it wkaes up after sleep mode now but still cant get a rom on the phone a new one

Radiation · #**452** (**permalink**) 08-08-2008, 12:17 PM

Hi All.. . Here's where I'm stuck..I do the hard reset and get the 4 color screen on the vogue and I plug in the USB cable and it goes from 'serial' to 'usb' . I run the Unlocker on the PC and on the PC screen it says Your Phone version is (and it's blank' I click on Update, and it says.. Updating from 'blank' to 'Unlocker _2.31' and I click next. I get to a screen where it shows 0% on my pc and on my Vogue and it sits there for about 2 minutes and then gives me an error of 262

"This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode."

I go through the recovery mode and all is well with the phone.. I can get back into windows. What am I doing wrong?

I've rebooted, unistalled/reinstalled active sync.. I'm going through a USB 2.0 connection and activesync usually works fine when I'm transferring files back and forth.

**gguruusa** · #**453** (**permalink**) 08-08-2008, 01:48 PM

When you are in bootloader mode, what version SPL is currently installed?

Radiation · #**454** (**permalink**) 08-09-2008, 01:34 AM

Vogu100
Spl-0.36.0000
Cpld-3

jim2561 · #**455** (**permalink**) 08-09-2008, 02:56 AM

hmm strange...tell us EVERY single tedious step you took. if you simply follow the directions to the letter, it works 100% 100% of the time if conditions are correct.

jim2561 · #**456** (**permalink**) 08-09-2008, 02:56 AM

Quote:

Originally Posted by dette

You have a Mogul?? Your not trying to use this unlocker on the Mogul are you?

lol dang wow nice catch. im so tired from work i didnt even notice that.. :S ugh

Radiation · #**457** (**permalink**) 08-09-2008, 10:56 AM

Should I be using a different unlocker? What's the difference between the mogul and the Vogue?

1. I reset the phone with the camera/power/soft reset method
2. It shows a 4 color screen with the info above with the word 'Serial' at the bottom. I plug the phone into my computer via a usb 2.0 cable (ones that came with the phone) and the display switches from 'Serial' to 'USB'. Also the PC (Windows XP) makes the 'USB COnnect' sound indicating it detects the device. (However the activesync tray icon still is greyed out and says 'non connected'.
3. I load the Vogue_unlocker_MFG_2.31 software with 'ROMUpdateUtility.exe'
4. I put a check in the box that says I understand the the caution and click 'Next'
5. I put a check in the box indicating I have completed the 4 steps it says to do and click 'Next'
6. It says it's verifying info on my PDA phone and please wait.. After about a minute...
7. it shows results.. 'Image Version' It is blank. I click on the 'Update ' button
8. Then it say.. From: Image Version: >Blank area< To: Image Version: Unlocker_2.31 (At this point my Phone's screen has gone gret with a progress bar at 0%
9. I click the 'Next' button and it tells me I'm ready to upgrade and it will take about 10 minutes and I click 'Next' Again
10. The Computer then shows a progress bar and stays at 0%.. After about 2 minutes.. I get the error from my original message above and it tells me to 'perform a recovery' on the phone which I do and it works and boots up normally.

I'm off to work so I won't be able to reply until late tonight so do take my lack of an immediate response as not wanted to get this figured out.

thanks again.

KINYA · #**458** (**permalink**) 08-10-2008, 06:59 PM

Can anyone tell me how to get the right spl and a custom rom on my phone

jim2561 · #**459** (**permalink**) 08-11-2008, 01:12 AM

Quote:

Originally Posted by Radiation

Should I be using a different unlocker? What's the difference between the mogul and the Vogue?

1. I reset the phone with the camera/power/soft reset method
2. It shows a 4 color screen with the info above with the word 'Serial' at the bottom. I plug the phone into my computer via a usb 2.0 cable (ones that came with the phone) and the display switches from 'Serial' to 'USB'. Also the PC (Windows XP) makes the 'USB COnnect' sound indicating it detects the device. (However the activesync tray icon still is greyed out and says 'non connected'.
3. I load the Vogue_unlocker_MFG_2.31 software with 'ROMUpdateUtility.exe'
4. I put a check in the box that says I understand the the caution and click 'Next'
5. I put a check in the box indicating I have completed the 4 steps it says to do and click 'Next'
6. It says it's verifying info on my PDA phone and please wait.. After about a minute...
7. it shows results.. 'Image Version' It is blank. I click on the 'Update ' button
8. Then it say.. From: Image Version: >Blank area< To: Image Version: Unlocker_2.31 (At this point my Phone's screen has gone gret with a progress bar at 0%
9. I click the 'Next' button and it tells me I'm ready to upgrade and it will take about 10 minutes and I click 'Next' Again
10. The Computer then shows a progress bar and stays at 0%.. After about 2 minutes.. I get the error from my original message above and it tells me to 'perform a recovery' on the phone which I do and it works and boots up normally.

I'm off to work so I won't be able to reply until late tonight so do take my lack of an immediate response as not wanted to get this figured out.

thanks again.

alrighty so as your profile says...you do indeed have a cdma touch/vogue correct? and you are trying all this on that device, and not on a mogul/titan correct?
what radio rom and os rom do you have on your device right now? have you ever performed any other modifications concerning flashing or unlocking before? attempted to do so? what spl do you have on the device right now?

Quote:

Originally Posted by KINYA

Can anyone tell me how to get the right spl and a custom rom on my phone

the only thing i can say is to follow these directions here: http://forum.ppcgeeks.com/showthread.php?t=17473

TO THE LETTER. ok? and (if possible) get back to completely stock original rom and radio and everything before starting. im not sure what the problem is.

i would pm imcokeman.

**ImCoKeMaN** · #**460** (**permalink**) 08-11-2008, 09:03 AM

Both of these users appear to be trying to flash the hardSPL from bootloader which cannot be done. The unlocker exe will run the commands that are needed from WM os and it will put a temporary loader on the phone. At this point don't reset, just disconnect and reconnect. Activesync will not reconnect and it doesn't matter, just continue with the directions from the unlocker