Flashing new roms - metroPCS

[emartinez13]

Originally Posted by YouMayLose

I got it working now.. since you were running the rom I figured you had it working so I just deleted all settings and redid it completely and that fixed my problem..dont no where it went wrong the first time around but works now

Good to hear, I always delete any settings that are there by default and start from scratch and i've never had a problem doing it that way. Btw "metropcs" is the password, have never tried "mymetropcs" but if it works, all the power to you.

[timetraveler]

Hello to all,
I did not do this on my own. I did a ton of reading and basically pulled the information from all of the other post.
I wanted to make one just for the Sprint Diamonds.
I have a HTC Diamond on Metro with the $45.00 plan. It is unlocked has the 2001 PRL and I placed Juicy's Rom Version 3.8 on it.
Do not skip any steps!!!!!
This works...

WAP
1: Goto settings -> Connections -> Connections
2: Remove any connections that are there
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = yourtendigitphonenumber@mymetropcs.com
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
HDR AN AUTH User Id = yourtendigitphonenumber@mymetropcs.com
PPP USER ID = yourtendigitphonenumber@mymetropcs.com
PPP PASSWORD = metropcs
5: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dail = #777
Username: yourtendigitphonenumber@mymetropcs.com
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.
Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.
MMS
MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings:
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )



http://howardforums.com/showthread.php?t=1466303
here is the link and info i used to set my touchpro on metropcs
carrier cab used verizon look at link for more info used info at own risk couse you have to edit some reg.

[pimpsuprazx]

All you did was copy sequans tut from howard forum and pasted it here without even giving him credit, what a crock.

[Isriam]

i cant be bothered to go look up the settings, but if you can post them here easily enough maybe i can edit my cricket cab for you.

[YouMayLose]

Originally Posted by Isriam

i cant be bothered to go look up the settings, but if you can post them here easily enough maybe i can edit my cricket cab for you.

Here is the link to the exact settings for both wap and mms for metro..
http://forum.ppcgeeks.com/showpost.p...1&postcount=14

[Isriam]

thanks, give me a bit and i'll make it. i cant do the secure wap port because i dont know the coding for provxml, maybe someone can look it up for me

[emartinez13]

Originally Posted by Isriam

thanks, give me a bit and i'll make it. i cant do the secure wap port because i dont know the coding for provxml, maybe someone can look it up for me

That would be awesome! I downloaded the WinCE trial and i'm going to give it a shot, would be nice to learn to make cabs for different stuff that I use.

[Isriam]

try this out and let me know what you think. if it doesnt work, compare the registry edits it does to the post linked above and tell me what i missed.

i'm not sure if this sets X-MDN if it doesn't i can add that script so it does it as well.

[djsonar]

these are the settings i use on metro
name:##########@mymetropcs.com
password:mymetropcs

[emartinez13]

Originally Posted by Isriam

try this out and let me know what you think. if it doesnt work, compare the registry edits it does to the post linked above and tell me what i missed.

i'm not sure if this sets X-MDN if it doesn't i can add that script so it does it as well.

I'm going to give this a try, I really appreciate you taking the time to do this. I was just looking through a different carrier cab and there's so much stuff in there, I didn't even know where to start. So, thank you!