voice command not announcing incoming calls
 

Voice command is not announcing incoming calls, but everything else seems to be working. Anyone else tried voice command?
My wifes diamond has no problem with voice command.

Re: voice command not announcing incoming calls
 

If it's Microsoft Voice Command make sure to enable that option in the settings.

Re: voice command not announcing incoming calls
 

all options are enabled cant figure out y it isnt working, does your phone announce incoming calls

Re: voice command not announcing incoming calls
 

sorry i don't have the touch pro yet but here are some other troubleshooting tips:

1. Make sure master volume isn't set to mute
2. Check to see that incoming calls can be announced at any time and not just "free times"
3. Try disabling the ringtone because it could potentially be drowning out the voice command voice

hope that helps

Re: voice command not announcing incoming calls
 

tried all but #3

Re: voice command not announcing incoming calls
 

now i have tried everything still no luck

Re: voice command not announcing incoming calls
 

Hmm. Disable the option for announce incoming calls, soft reset, then enable it, soft reset. Although that tip is probably stretching I have a feeling it could be the sol'n.

Re: voice command not announcing incoming calls
 

If that doesn't work you can follow the steps in this thread, though I would backup those files first.

http://forum.xda-developers.com/show...14&postcount=5

Re: voice command not announcing incoming calls
 

Yeah, I just noticed the same thing. Hadn't realized until you brought it up. I'll try the fix.

EDIT: No, I'm not trying those. Those are from a drastically older version of voice command.

Re: voice command not announcing incoming calls
 

my friend does not announce either

Re: voice command not announcing incoming calls
 

Mine doesn't work either. I'm hoping there will be a fix for it soon.

Re: voice command not announcing incoming calls
 

Tried it as well not working checked all options and notifications. the ringtone lowers when voice command is suppose to announce the caller but nothing is said.

Re: voice command not announcing incoming calls
 

exactly

Re: voice command not announcing incoming calls
 

im on my third diamond and the only thing i get is some lady telling me my battery is low on all three.

Re: voice command not announcing incoming calls
 

my wifes diamond works perfectly purchased the diamond 2 weeks ago

Re: voice command not announcing incoming calls
 

mine doesn't work either. this sucks.

Re: voice command not announcing incoming calls
 

Not working on my TP either!

Re: voice command not announcing incoming calls
 

Works perfect on my diamond, and all phases of VC work on my pro. However i get the same thing when announcing calls on my Pro, a lowered ringtone but no voice. Someone want to tell me if there is a reg entry i can compare ( i have memaid on both).

edit: checked HKLM/SOFTWARE/MICROSOFT/VOICECOMMAND. All settings are exactly the same. Maybe something under ringer?

Re: voice command not announcing incoming calls
 

has anyone tried replacing the voice command files onthe pro with the files from the diamond?

Re: voice command not announcing incoming calls
 

any ideas? anyone?

Re: voice command not announcing incoming calls
 

tried it already still not working. getting the same results it's on the device but not announcing.

Re: voice command not announcing incoming calls
 

hmm, this realy sucks....

Re: voice command not announcing incoming calls
 

I agree

Re: voice command not announcing incoming calls
 

has anyone tried replacing the voice command.exe with a previous version?
the sprint touch pro version is 1.6.19965

Re: voice command not announcing incoming calls
 

i was just about to try that. i have ver 1.6.19214 on my mogul which works just fine.....

Re: voice command not announcing incoming calls
 

check this out
http://www.winmo-experts.com/viewtopic.php?f=11&t=2

Re: voice command not announcing incoming calls
 

Tried replacing VoiceCommand with older version that works on the Mogul - and that doesn't fix this problem.

When an incoming call is received, MSVC creates a .wav file in \Application Data\Volatile called TTSCallerID.wav.

At least on my TP, this file is being created when each call is received - and when the .wav file is played through Windows Media Player, it has the correct announcement for the incoming call.

The problem may not be with MSVC but with how the TP phone is handling the ring.

Using a Registry Editor, I forced the ringtone by setting \\HKCU\ControlPanel\Sound\RingTone0\Sound to the \Application Data\Volatile\TTSCallerID.wav.

When the next call comes in, then there isn't any ringtone - just the called ID announcement.

Unfortunately, manually changing this creates some side-effects...

It breaks the toggle between Vibrate mode and Ringer set by using the "Quick" menu (long hold END key). Vibrate turns on, but restoring to Ringer doesn't work.

And, when the phone ringer screen is entered, the above override is removed and replaced with a ring tone.

I've compared the registry settings with my Mogul - which was working properly for incoming call announcements - and everything seems to match.

I also did a hard reset of the phone, and tried doing incoming call announcements immediately after the hard reset - and on my phone - I can not get the incoming call announcements to work - even without any additional applications or settings installed.

Seems like the hard part is working - getting the caller ID announcement generated - the failure is in getting the generated .wav file played as the ringtone.

Re: voice command not announcing incoming calls
 

good work

Re: voice command not announcing incoming calls
 

i miss mine not saying "say a command" and the moguls was better same as the tilts

Re: voice command not announcing incoming calls
 

^^^^^^lol....

thats funny. do you want it to call you "master" too?

Re: voice command not announcing incoming calls
 

well if she had a more sexy voice it could be "yes master, what is your wish?"

Re: voice command not announcing incoming calls
 

i think probably a major problem with installing another ver of voice command is that there is already a voice command on the tp with the files associated with this ver being system and read only. as the result, you cant completely uninstall the built in ver.

when i tried to install another ver, i got an error at the end of the installation probably because of this.

anyone have any comment on this??

Re: voice command not announcing incoming calls
 

Incoming call announcement worked for me once. I've tried to replicate it since then but haven't been able to. What happened was my phone was receiving an SMS while there was also an incoming call. It was weird.

Re: voice command not announcing incoming calls
 

yeah i receievd a sms from the sprint website about my pic mail password. i had the site send it to me via sms.. low and behold, the announce lady spoke every word of my sms message right down to my password! scared the #$(#) out of me as i was not expecting that.. but thaat worked.... phone was not ringing though.. lol

Re: voice command not announcing incoming calls
 

can anyone try to completely uninstall the built in voice command? please let me know if anyone can. thanks.

Re: voice command not announcing incoming calls
 

not possible since it's built into the ROM.

Re: voice command not announcing incoming calls
 

there got to be a way to get this worked somehow... this might really be how we can get voice command to work

Re: voice command not announcing incoming calls
 

I'm having the same problem. I've tried tweaking every setting in the voice command options without any luck. I'd really like this to work. Currently my only choice is to answer the call blindly or take out my phone and look at it to see who's calling. Not exactly optimal use of a headset...

Re: voice command not announcing incoming calls
 

I'm having the exactly same issue... I emailed HTC.com today about it.

I hope their customer support will be better than Palm.

Re: voice command not announcing incoming calls
 

The problem with the call announcement on the TP doesn't appear to be with Voice Command, but possibly with the phone software on the TP - since Voice Command is generating the announcement file - it's just not being played.

The following registry changes might partially restore the call announcement, a short-term solution until something better comes along:

HKCU\ControlPanel\Sounds\TTSAnnounce\Category: change VoiceCommand1 to Ring
HKCU\ControlPanel\Sounds\TTSAnnounce\Script: change as5p to v0p (for vibrate and ring) or p (for ring only)

With this change, the ringtone will start - and then be interrupted with the calller ID/name announcement. (Assuming that call announcement has been enabled in Voice Command).

Only major flaw with this solution is that the announcement volume is low.