PPCGeeks - Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- HTC Touch Pro (http://forum.ppcgeeks.com/forumdisplay.php?f=63)

- - Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS! (http://forum.ppcgeeks.com/showthread.php?t=104276)

Re: Linux/Android on CDMA Touch Pro (RAPH800)

Quote:

Originally Posted by SlipperyMonkey (Post 1653763)

Thanks for the help makkonen :)

I see

Code:

mmcblk0: p1

:scratch:

Anything else to try?

What comes up after that, but before it stops and waits for 120 seconds?

Re: Linux/Android on CDMA Touch Pro (RAPH800)

Here's the current startup.txt.

Code:

set ramsize 0x6000000

set ramaddr 0x10000000

set mtype 2039

set KERNEL zImage

set initrd initrd.gz

set cmdline "lcd.density=240 msmvkeyb_toggle=off physkeyboard=raph gsensor_axis=2,-1,3 rel_path=andboot acpuclock.oc_freq_khz=528000"

boot

Re: Linux/Android on CDMA Touch Pro (RAPH800)

I had waiting for SDcard over and over and then I tried moving it all out of the andboot folder into the root and it said it could not access the sdcard hmm

Re: Linux/Android on CDMA Touch Pro (RAPH800)

Quote:

Originally Posted by peterm20 (Post 1651422)

yeah 210 screen resolution fixed missing FB for me too. I was in the same boat but i rember that market hides apps for nonsupported resolutions. The APNS i have not messed with it besides figuring out that some settings make it go away.

How do you change the resolution??

Re: Linux/Android on CDMA Touch Pro (RAPH800)

Quote:

Originally Posted by cchris81 (Post 1653845)

How do you change the resolution??

In the startup.txt file the lcd density change it from 240 to 210

Re: Linux/Android on CDMA Touch Pro (RAPH800)

Quote:

Originally Posted by makkonen (Post 1653795)

What comes up after that, but before it stops and waits for 120 seconds?

This is what I see:

Code:

   Welcome to Vogue Linux

  Waiting for SD Card

  Waiting for SD Card

  Mmc1: host does not support reading read-only switch, assuming write-enabled

  MMC1: new high speed SDHC card at address 0007 

  Mmcblk0: mmc:0007 SD08G 7862272KiB

  mmcblk0: p1

  Running an fsck on the SD Card

  Dosfsck 3.0.1, 23 Nov 2008, FAT32, LFN

  There are differences between boot sector and its backup.

  Differences: (offset:original/backup)

  65:01/00

  Not Automatically fixing this

  /dev/block/mmcblk0p1: 184 files, 25292/1960448 clusters

  E2fsck 1.41.4 (27-Jan-2009)

  Ext2fs_check_if_mount: no such file or directory while determining whether /dev/block/loop2 is mounted.

  /dev/block/loop2: clean, 439/448 files, 11415/15360 blocks

  Cleaning up…

  Switching to rootfs…

  Rootfs is loaded

  GSM phone found

  Checking for partition…

  Creating a new Data Store (Hangs here for about 7-8 minutes)

Then the error pops up :(

Anything I can do to get Android working?:scratch:

Thanks :headbang:

Re: Linux/Android on CDMA Touch Pro (RAPH800)

ok i formatted fat and fat32 and the thing still freezes after it vibrates twice

Re: Linux/Android on CDMA Touch Pro (RAPH800)

Quote:

Originally Posted by SlipperyMonkey (Post 1653900)

This is what I see:

Code:

   Welcome to Vogue Linux

  Waiting for SD Card

  Waiting for SD Card

  Mmc1: host does not support reading read-only switch, assuming write-enabled

  MMC1: new high speed SDHC card at address 0007 

  Mmcblk0: mmc:0007 SD08G 7862272KiB

  mmcblk0: p1

  Running an fsck on the SD Card

  Dosfsck 3.0.1, 23 Nov 2008, FAT32, LFN

  There are differences between boot sector and its backup.

  Differences: (offset:original/backup)

  65:01/00

  Not Automatically fixing this

  /dev/block/mmcblk0p1: 184 files, 25292/1960448 clusters

  E2fsck 1.41.4 (27-Jan-2009)

  Ext2fs_check_if_mount: no such file or directory while determining whether /dev/block/loop2 is mounted.

  /dev/block/loop2: clean, 439/448 files, 11415/15360 blocks

  Cleaning up…

  Switching to rootfs…

  Rootfs is loaded

  GSM phone found

  Checking for partition…

  Creating a new Data Store (Hangs here for about 7-8 minutes)

Then the error pops up :(

Anything I can do to get Android working?:scratch:

Thanks :headbang:

Try deleting data.img off your sd card, and making sure you have at least 256mb free space before you start up, so it can successfully create a new data store.

Quote:

Originally Posted by gluka47 (Post 1653949)

ok i formatted fat and fat32 and the thing still freezes after it vibrates twice

It really sounds like you have a RAPH500. I don't know of any way to make a RAPH800 hang right there. You're running off the all-in-one package from the first post, with no change to the startup.txt? I'm baffled.

Re: Linux/Android on CDMA Touch Pro (RAPH800)

perhaps test out the raph500 startup.txt to see if it makes any difference??

Re: Linux/Android on CDMA Touch Pro (RAPH800)

raph500 won't get past 'loading linux' anyway, so that won't do too much good. I don't think there's even a raph500 startup.txt floating around here.