WM 6.5 IS out for CDMA.. proof in here.

[railslave]

Originally Posted by jeriel05

I have this one for 6.1 roms not sure if it will work with 6.5

thank you sir

[krohnjw]

Originally Posted by railslave

it seems that i cannot modify or add provisions for sprint in the mms setup

Is server edit enabled?

\HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\UI\EnableServerEdit - set to 1 soft reset

[jhale83]

Originally Posted by Juggalo_X

the name the NBH to RHODIMG.nbh put on the root of SD and boot to bootloader

So do we just rename the .exe file you posted to RHODIMG.nbh to flash it from the memory card?

[railslave]

ok folks mms works great!!!!!!!!!!!!!!!!!!!

i used the kitchen and made sure the arcsoft mms was not included. the i installed the sprint arcsoft mms cab to my phone, and mms service works no problem. (the kitchen rom is buggy)

i would imagine if you do the reg edit, and set it to sprint provisions on juggs rom it should work fine(can anyone confirm)

[relux]

Originally Posted by jhale83

So do we just rename the .exe file you posted to RHODIMG.nbh to flash it from the memory card?

No, you can either execute the executable and grab the .nbh file from the temp folder it extracts to or you can use winrar(file juicer if you're on a mac) to extract the .nbh from the .exe. That file gets renamed to RHODIMG.nbh.

[arlindemini]

Thanks! Confirmed working on VZW,

Steps for n00bs like me:
Go to Messages,
then tap "All Messages",
then "Menu",
Scroll down to "MMS Options...",
hit the "CDMA Servers" tab,
hit "New",

server name "Verizon Wireless",
Gateway "" (blank),
Port number: "80",
Server Address: "http://mms.vtext.com/servlets/mms",
Connect via: "Verizon Wireless" (note: I modified connections before doing this, so it might say "My Connection"),
Send Limit: 1024k

Originally Posted by Juggalo_X

don'tinstall the cab just fix the MMS server info. USC includes the VZW Archsoft MMS packages.

[apristel]

I used the kitchen and build the rom leaving out the arcsoft and tone room bullshi and installed juggalo_X sprint provisioning, my arcsoft cab, and everything that i've tried on this rom works perfect. Its pretty quick i'd say.

Sprint PRL update works, tv, mms, you name it. Oh I also found where the be polite setting is enabled to be visible or not.. I dont think anyone had found that yet... I'll make a cab in a bit to enable it for everyone. Probably will work on mighyrom too, that way you can turn it off/on in the settings tab/sounds.

liking this rom alot.

[railslave]

Originally Posted by apristel

I used the kitchen and build the rom leaving out the arcsoft and tone room bullshi and installed juggalo_X sprint provisioning, my arcsoft cab, and everything that i've tried on this rom works perfect. Its pretty quick i'd say.

Sprint PRL update works, tv, mms, you name it. Oh I also found where the be polite setting is enabled to be visible or not.. I dont think anyone had found that yet... I'll make a cab in a bit to enable it for everyone. Probably will work on mighyrom too, that way you can turn it off/on in the settings tab/sounds.

liking this rom alot.

great stuff i must say.

[Gorby]

Very quick and stable ROM so far. MMS/SMS work fine on Sprint with the correct server info.

Looking forward for these drivers/packages/manila to work it's way into every custom ROM and kitchen!

Thank you.

[Mr. X]

Originally Posted by Gorby

Very quick and stable ROM so far. MMS/SMS work fine on Sprint with the correct server info.

Looking forward for these drivers/packages/manila to work it's way into every custom ROM and kitchen!

Thank you.

my rom is rock stable will be posted today