Sprint ## code for touch pro 2

[mikejones13]

What does ##37872# - Full Speed USB Mode - Enable/Disable do

[Ice Cold]

Originally Posted by mikejones13

What does ##37872# - Full Speed USB Mode - Enable/Disable do

I would like to know this also

[pimpsuprazx]

http://www.ppcgeeks.com/forums/showthread.php?t=87414

find it here without all the hassle.

not sure if it will work on verizon.

[mikejones13]

Full Speed USB is the slow compatible mode method.
You want to leave it at default Hi-Speed.

from everythingusb dot com:

"USB 1.1 allowed a maximum transfer rate of 12Mbits/second. It is now obsolete, but both of its speeds (1.5Mbps & 12Mbps) are being adopted into USB 2.0, and they are now called Original USB officially. Though some manufacturers label their products Full-Speed USB. Note that this seems a bit deceptive as it's easy to mistake Full-Speed for Hi-Speed. You won't be fooled from now on as you now aware that Full Speed USB is only 12Mbits/second where Hi-Speed USB mode is capable of a much faster 480Mbits/second."

Found this here....http://forum.ppcgeeks.com/showpost.p...7&postcount=22

[OR78]

ANyone on Mikes new ROm and having problem with getting ##3282# to work? I don't get any response in his thread....any ideas here?

[hceuterpe]

Originally Posted by OR78

ANyone on Mikes new ROm and having problem with getting ##3282# to work? I don't get any response in his thread....any ideas here?

Yeah, same problem. It shows EPST for a second and then disappears. The ##778# works though.. Strange..

[hceuterpe]

This is strange. The Sprint stock ROM, when i enter ##3282#, it works fine. But with both Juicy R2 and MightyROM, the code splashes the EPST.exe and then it disappears and of course doesn't load...

[mswlogo]

Originally Posted by hceuterpe

This is strange. The Sprint stock ROM, when i enter ##3282#, it works fine. But with both Juicy R2 and MightyROM, the code splashes the EPST.exe and then it disappears and of course doesn't load...

I'm having the same issue on Energy 28008 ROM. Some codes work, some don't.

Calkulin's Kitchen 28005 ROM did work. But it could not get Tower locks with GoogleMaps.

And I could swear Energy's 28008 ROM worked yesterday and I did something to break it (Like ran Provision or something).

The #777 Popups I think are related too.

Something is not right on the Reprovisioning of these ROMs.

[tvandyck7]

##778#
password: 000000

BTW: Changing the slot cycle to 1 and 0 did nothing for me. No change whatsoever.

[mtnmedic]

Originally Posted by TheBundo

## Codes

http://forum.ppcgeeks.com/showthread...ht=%23%23codes
*
##778# - EPST - Advanced Programming
##786# - EPST - Reverse Logistic
##4772579# - RESETs
##37872# - Full Speed USB Mode - Enable/Disable
##8626337# - EPST/Vocoder -
##2539# - EPST/A-Key - Authentication Key
##7738# - EPST/P_Rev - Protocol Revision
##3282# - EPST - Basic Programming
##775# - EPST/PRL - PRL Settings
##3386# - DDTM - Enable/Disable
##33284# - Debug - FieldTrial Debug Info
##3424# - DMR - PORT INFO
##326454#
*

These codes should perhaps be put in the "essentials" sticky of this TP2 forum.