PPCGeeks
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)
-   -   Change TP2 MSL Code to 000000 (http://forum.ppcgeeks.com/showthread.php?t=89751)

pimpsuprazx 10-10-2009 01:26 PM
Re: Change TP2 MSL Code to 000000
 
Quote:
Originally Posted by Informed101 (Post 1227703)
That's what I did first but when I mouse over the place where it says COM1 on the bottom of the 2.7 screen nothing happens. No drop down. Nothing. It just stays 2.7.
not there, under main tab, then com settings(at mode), it says port, then com1 then you click there.

Informed101 10-10-2009 02:01 PM
Re: Change TP2 MSL Code to 000000
 
pimpsuprazx You are totally awesome!!!!!
Thank you so much for your help and patience!!!!!


Now on to the next step of the TP2 conversion....

pimpsuprazx 10-10-2009 02:11 PM
Re: Change TP2 MSL Code to 000000
 
Quote:
Originally Posted by Informed101 (Post 1227762)
pimpsuprazx You are totally awesome!!!!!
Thank you so much for your help and patience!!!!!


Now on to the next step of the TP2 conversion....
no prob, now you just need to follow the flash to metro pcs guide and upload the PRL, then have it houdinied and your up and running.

Informed101 10-12-2009 03:34 AM
Re: Change TP2 MSL Code to 000000
 
Thanks again PimpSupraZX for all your help. =D>

Well, I think I followed the guide, step by step. Went to 3 different Metro PCS stores, 2 corporate, one authorized, and non could flash. ](*,) Any suggestions? Anyone in LA who can flash it?

Is there a way I can check it to make sure I've done all the steps right? I do know that when I enter the 000000 it gets me into the edit page so at least that much is sure. I also put the 02001.prl file on my TP2 and followed the instructions to put it in. Not sure how to check if it went in ok.

Houdini is the program all MetroPCS dealers use? Or just certain shops?

When I dial *228 I get the MetroPCS welcome. So far so good? Just flashing then?

pimpsuprazx 10-12-2009 09:00 AM
Re: Change TP2 MSL Code to 000000
 
Quote:
Originally Posted by Informed101 (Post 1231264)
Thanks again PimpSupraZX for all your help. =D>

Well, I think I followed the guide, step by step. Went to 3 different Metro PCS stores, 2 corporate, one authorized, and non could flash. ](*,) Any suggestions? Anyone in LA who can flash it?

Is there a way I can check it to make sure I've done all the steps right? I do know that when I enter the 000000 it gets me into the edit page so at least that much is sure. I also put the 02001.prl file on my TP2 and followed the instructions to put it in. Not sure how to check if it went in ok.

Houdini is the program all MetroPCS dealers use? Or just certain shops?

When I dial *228 I get the MetroPCS welcome. So far so good? Just flashing then?
Its certain shops, go on howard forums.com and get a hold of reemo4580
I personally know he is in LA and flashed tp2's before. And to answer your question, if the PRL is updated, and you changed the MSL code, good job btw, it flashes just like a touch pro does, so those people unforunately do not know what they are doing.

Informed101 10-12-2009 11:53 AM
Re: Change TP2 MSL Code to 000000
 
Thanks again pimpsuprazx !

You're help has been awesome!

I'm going to look reemo4580 up now.

Cheers!

pimpsuprazx 10-12-2009 11:55 AM
Re: Change TP2 MSL Code to 000000
 
Quote:
Originally Posted by Informed101 (Post 1231739)
Thanks again pimpsuprazx !

You're help has been awesome!

I'm going to look reemo4580 up now.

Cheers!
no problem bro, he's one of us metro mafia members, so you know he knows what he's doin lol.

Informed101 10-12-2009 01:48 PM
Re: Change TP2 MSL Code to 000000
 
Thanks again! =D> I've sent him a PM.

pimpsuprazx 10-12-2009 01:59 PM
Re: Change TP2 MSL Code to 000000
 
Quote:
Originally Posted by Informed101 (Post 1231929)
Thanks again! =D> I've sent him a PM.
cool cool, just tell him pimp told you about flashing the tp2

Informed101 10-12-2009 04:36 PM
Re: Change TP2 MSL Code to 000000
 
Yup! I mentioned it in my PM. Now just waiting to hear back from him.


All times are GMT -4. The time now is 02:03 AM.
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2026, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0