PPCGeeks
Page 15 of 24 « First 51314 15 1617 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)
-   -   Smartgear works great on Touch Pro 2! NES! Genesis! (http://forum.ppcgeeks.com/showthread.php?t=83843)

montecristo1 04-22-2010 03:30 AM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
Maybe it is me...but I have NOT noticed any issues with using the keyboard for gameplaying- set it up to the way I felt comfortable. PO works good- made it to the 3rd fighter... easily....occasionally my big thumbs got in the way, hence the gamepad will be easier.

bitbank 04-22-2010 09:55 AM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
Quote:
Originally Posted by THE-COPS (Post 1712725)
Game Ripper Game Pad. That would be the perfect solution if the rest of the keyboard could be used for mapping. Don't know why they haven't gotten that one figured out yet. TP2 has some weird key mapping issues in which you have to use KforRaphael to config 8 more buttons on the very left half of the board. See, it would work IF one could map a D pad on the left... AND map at least 6 buttons on the right hand side. But I don't think that works yet.

I liked playing games on my Motorola Q9M because it has a D-Pad. Made game playing a breeze and fun.... not tedious like on the TP2.
I have the T-Mobile TP2 and don't have any problems with the keyboard. Which TP2 do you have (Sprint/Verizon)? I guess I'll have to buy one of those to investigate the issues you're seeing with the keyboard.

mknollman 04-22-2010 10:51 AM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
montecristo - PM me about MB3 and other NES if you would like.

THE-COPS 04-22-2010 03:08 PM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
Hold off on that LB. I assumed it needed KforRaphael.. but I was wrong. I got all the controls set up no problem now. Sorry, I hadn't even tried it until now, and apologies for the confusion.

Now that I have tried it, heres some more feedback. The "." registered as a key for button "Select" on NES. But pushing that button in game didn't do anything. Assume I will have to use a different key. Backspace key registers as a square symbol, so again, I assume that key is not useable yet. NES emulation works perfect almost. HUGE difference over the old versions. There are some things I notice about the square wave channels that doesn't always sit right, but I wont get into that. Genesis emulation , well I have to say it, it doesn't work. I get the same problem as the other person. As soon as I open the rom, the screen turns black. No feedback from buttons, no sound..nada. Double tap wont pause it. I have to push the red hardware button for phone power , which makes the green indicator arrow on the left "Press to turn on backlight" , which I do, and that brings the pause screen up. Still, buttons wont respond after this. I have to click the X on the corner and then close it in Task Manager. Sorry, don't know what is causing it. All buttons are configure for Genesis (yes , for 6 button controller).

roofus3000 04-22-2010 09:36 PM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
Quote:
Originally Posted by THE-COPS (Post 1713594)
Hold off on that LB. I assumed it needed KforRaphael.. but I was wrong. I got all the controls set up no problem now. Sorry, I hadn't even tried it until now, and apologies for the confusion.

Now that I have tried it, heres some more feedback. The "." registered as a key for button "Select" on NES. But pushing that button in game didn't do anything. Assume I will have to use a different key. Backspace key registers as a square symbol, so again, I assume that key is not useable yet. NES emulation works perfect almost. HUGE difference over the old versions. There are some things I notice about the square wave channels that doesn't always sit right, but I wont get into that. Genesis emulation , well I have to say it, it doesn't work. I get the same problem as the other person. As soon as I open the rom, the screen turns black. No feedback from buttons, no sound..nada. Double tap wont pause it. I have to push the red hardware button for phone power , which makes the green indicator arrow on the left "Press to turn on backlight" , which I do, and that brings the pause screen up. Still, buttons wont respond after this. I have to click the X on the corner and then close it in Task Manager. Sorry, don't know what is causing it. All buttons are configure for Genesis (yes , for 6 button controller).
Im glad im not the only one i thought it might be my phone. Still i love smartgear and hope this can be fixed...

montecristo1 04-23-2010 12:26 AM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
Quote:
Originally Posted by mknollman (Post 1713060)
montecristo - PM me about MB3 and other NES if you would like.
Thanks mknollman....found MB3 for NES and a whole alot of others. Thanks though.

bitbank 04-23-2010 05:26 AM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
Uploaded a new build (2.0.9) which fixes many of the issues with load/save and stability. Please give it a try:

www.bitbanksoftware.com/sg.zip

P.S. I haven't seen any comments about the wireless controller support. Is anyone using a BGP100 or Zeemote with SmartGear and if so, are you happy with the way it works?

THE-COPS 04-23-2010 06:12 PM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
Update

New versio didn't fix the black screen issue with Genesis, though not sure if it was supposed to. After messing around with Genesis for awhile and changing settings, I found out what is causing the emulator to lock up on Gen. I disabled sound support option and suddenly Genesis games started loading. There must be something with the Gen sound thats causing it to hang. Disabling 16 bit sound didn't fix it.

While I had gen working, I tried out a couple games to see how they would work. Ghouls and Ghosts displayed fine. Arcus Odyssey is not playable. The graphics in AA are all mangled up and not even viewable.

Haven't tried any other system emulation yet.

csciguy 04-23-2010 09:34 PM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
I've been trying this version since it came out this morning it is still having issues. The GDI option just makes the screen blank. When I disable GDI it causes the game to stutter as the game runs. This applies NES and GB. Haven't tried the SNES. The FPS flashes in the upper left corner of the screen. I used to be able to touch the screen and return to the menu with the game paused. I am not sure how to do it. I just start double tapping the screen. Is there a way to disable the touchscreen controls and just use it to pause the game?

bitbank 04-24-2010 12:29 AM
Re: Smartgear works great on Touch Pro 2! NES! Genesis!
 
Quote:
Originally Posted by csciguy (Post 1716123)
I've been trying this version since it came out this morning it is still having issues. The GDI option just makes the screen blank. When I disable GDI it causes the game to stutter as the game runs. This applies NES and GB. Haven't tried the SNES. The FPS flashes in the upper left corner of the screen. I used to be able to touch the screen and return to the menu with the game paused. I am not sure how to do it. I just start double tapping the screen. Is there a way to disable the touchscreen controls and just use it to pause the game?
You're seeing some of the issues that have been corrected in 2.0.9. Throttling should be turned ON. If turned off, you'll see the FPS display in the corner of the display. There's rarely a need to use the GDI option - it will be slow.


All times are GMT -4. The time now is 02:46 PM.
Page 15 of 24 « First 51314 15 1617 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0