|
|
||||
Sim unlock your TP2 for free
I bought a used TP2 off of ebay the other day just to tinker with it. I've been playing with it for a week or so trying to unlock it, I know there is an unlocker made by Olipro/Cmonex available but I guess you have to pay for that. Although I have the Sprint TP2 and that one is Sim unlocked, but I was able to find a way to SIM lock/unlock it, I'm still trying to figure out how to turn Security off though, I mean setting @Secu_Flag to 0. I I did a lot of searching but couldn't find any instructions about unlocking the TP2 for free. So here is what I found so far: (If you want to follow the below procedure do it on your own responsibility, I'm not responsible if you mess something up)
Step 1- HardSPL your TP2 (This is available for free) Step 2- Load the following RUU rom to your TP2. It looks like this Rom when loaded to the RAM it enables some Atcmd commands that allows us to play with NV part of the ROM thus allowing us to Lock/Unlock: RUU_Signed.nbh Step 3- Run the following Atcmd: (This sets the Simlock flags to 0 thus removing the Simlock: AT@SimLOCK=0,1,code <--- where "code" is your MSL ( I set my MSL code to 000000 and found out that 22051978 worked too, I found this on the internet somewhere) AT@SimLOCK=0,2,code <--- where "code" is your MSL AT@SimLOCK=0,4,code <--- where "code" is your MSL AT@SimLOCK=0,8,code <--- where "code" is your MSL This only unlocks the SIM, I was able to toggle those on and Off on My Sprint TP2 without any problem. Now if only I can find the command that disables the Secu_Flag. I don't have a lot of experience with this maybe some of you guys have experience and could point me in the right direction to continue my small project I would appreciate it. Last edited by ccengineer; 08-17-2011 at 08:06 AM. |
This post has been thanked 1 times. |
|
||||
Re: Sim unlock your TP2 for free
What do you mean? Did I do something unrelated to what I want to accomplish?
Last edited by ccengineer; 08-17-2011 at 08:20 AM. |
|
||||
Re: Sim unlock your TP2 for free
Hey ive tried this . and using CDMA Workshop 2.7 and QPST and QXDM those AT@ SIM Lock commands are coming up not recognizable ..
|
|
||||
Re: Sim unlock your TP2 for free
Yes followed your instructions to a T . i'll try on stock ROM once i get my new phone activated . |
|
||||
Re: Sim unlock your TP2 for free
I issued my commands using atcmd from c# an they worked just fine, I was even getting "0/n" or "0/r" or somethong of that sort back and the flags where toggling without any problem.
|
|
||||
Re: Sim unlock your TP2 for free
Quote:
Would you mind attatching the program you used ? |
![]() |
|
Tags |
cmonex |
Thread Tools | |
Display Modes | |
|
|