Cannot Unlock TP2 @ so Flash a ROM!!!! HELP!!!

rwynter · #1 (**permalink**) 01-04-2011, 04:52 PM

I have tried to do the Hard SPL via Rhodium and to no avail!!! I just got a recertified TP2 after flashing my last TP2 via computer but it will not unlock so I can flash. I have also tried different versions of flashing and it gets stuck at 0% and then I get the error message and take out the battery once again. I have also added the ROM in the root of my SD card and tried to flash it that way but it will not unlock. I have even tried to relock cab and tried to see if it would unlock. Can someone please help? I want to flash the latest Energy ROM but nothing is happening… Thanks again Guys/Gals!

eric12341 · #2 (**permalink**) 01-04-2011, 05:07 PM

try opening up WMDC as if u were goin to sync then use the automatic flash method and then follow directions.

if that doesn't work then it may be the common issue withthe unlocker in which u get 1 unlock for free then u have to make a donation to keep it working.

**cmonex** · #3 (**permalink**) 01-04-2011, 05:51 PM

Quote:

Originally Posted by rwynter

I have tried to do the Hard SPL via Rhodium and to no avail!!! I just got a recertified TP2 after flashing my last TP2 via computer but it will not unlock so I can flash. I have also tried different versions of flashing and it gets stuck at 0% and then I get the error message and take out the battery once again. I have also added the ROM in the root of my SD card and tried to flash it that way but it will not unlock. I have even tried to relock cab and tried to see if it would unlock. Can someone please help? I want to flash the latest Energy ROM but nothing is happening… Thanks again Guys/Gals!

you need to check what error you get in the Automatic flash mode.

if it launches the RomUpdateUtility in Auto mode, and errors out with 262 connection error, then check USB troubleshooting tips at Olipro->Creations(&Unlockers); - RhodiumW Hard-SPL (note, if you have a GSM Rhodium, don't try downloading from any of the file links there. but the tips apply just the same)

if it doesn't get that far and says you used this program before, then send us a request to get another use for it (this is free, donation is only optional if you are happy to do so): HTC-Unlocks Support

if the error is none of the above 2, let us know what it is exactly.

edit: I just noticed you put a rom on the SD card. please don't do that while Hard-SPL unlocking. best to remove the SD card, then you can be sure nothing is left on it that could interfere.

rwynter · #4 (**permalink**) 01-04-2011, 10:41 PM

I tried what was offered advice-wise but still to no avail. It is a replacement TP2 and for some reason I can't unlock my phone to flash a new ROM. Can someone get back to me? Thanks again.

**cmonex** · #5 (**permalink**) 01-05-2011, 10:54 PM

Quote:

Originally Posted by rwynter

and for some reason

did you read my post too? depending on the actual error message (beyond "for some reason"), the solution is different. if it's the 262 connection error, did you try all the USB troubleshooting tips that I linked to?

eric12341 · #6 (**permalink**) 01-06-2011, 12:38 AM

Quote:

Originally Posted by cmonex

did you read my post too? depending on the actual error message (beyond "for some reason"), the solution is different. if it's the 262 connection error, did you try all the USB troubleshooting tips that I linked to?

probly didn't. sounds like the USB cable may need to be replaced.

**darren.wlsn1** · #7 (**permalink**) 01-06-2011, 12:47 AM

Quote:

Originally Posted by eric12341

probly didn't. sounds like the USB cable may need to be replaced.

funny thing is i told him that 2days ago in a pm. lol

puff601 · #8 (**permalink**) 01-04-2011, 11:11 PM

ive had what sounds like the same error 262 connection error. i had it on a brand new sprint tp2 and a refurb replacement. nothing i tried seemed to work for me except this:

1) remove sd and sim cards from tp2
2) connect tp2 to usb cable to tp2
3) restart your pc
3) hard reset your phone!
4) wait until the phone gets to the align screen.
5) then run hspl.

^like i said, this is what seemed to work for me twice after continuosly having my tp2 freeze @ 0% then the hspl giving a error 262. ive saw other people having similar issues, seems to be more sprint tp2 related or something. just keep messing with it. thats what ive had to do twice.

tacotoy · #9 (**permalink**) 01-04-2011, 11:33 PM

if its refurbed then possibly it was unlocked before and the unlocker is not going to relock it again. message cmonex or olipro on their site and they should be able to get you squared away

puff601 · #10 (**permalink**) 01-05-2011, 02:05 AM

Quote:

Originally Posted by tacotoy

if its refurbed then possibly it was unlocked before and the unlocker is not going to relock it again. message cmonex or olipro on their site and they should be able to get you squared away

if i caught what cmonex said correctly... if the tp2 has been unlocked before, the unlocker will say show a message before it makes the tp2 enter bootloader of try to flash hspl. the fact that op's tp2 even goes into bootloader makes me think that his tp2 is not blacklisted and the issue is something else.