PPCGeeks
Page 2 of 10 1 2 34 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)
-   -   ѠѳѺ Ultimate Overclocking, Tweaks and Tools Guide For TP2 ѺѳѠ Updated 10/21/2010 (http://forum.ppcgeeks.com/showthread.php?t=132714)

bitslizer 08-31-2010 04:04 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
Quote:
Originally Posted by gono666 (Post 1930354)
If you only install Msm7kSpeed and SetCpuSpeed you will have stability issue when finishing phone calls, to be honest i didnt know that SetCpuSpeed had been packed into a cab file can you please post the link to it maybe the reg fix was added to this cab you are talking about,and BTW alot of users are still lost on how to overclock thats why i made a detailed guide of how to do it.
Here you go

http://forum.xda-developers.com/show...postcount=1000

gono666 08-31-2010 04:21 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
Quote:
Originally Posted by twobeaglesjtj (Post 1930406)
When I restart I get an error message after i unlock it that says..the file 'SetCpuSpeed.exe/boot' cannot be opened. It locks the phone up and I have to restart................ What next????
make sure you use "/" you need to hit space once after the link's quotation mark it should like this SetCpuSpeed.exe" /boot

shadixmax 08-31-2010 04:31 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
I like this walkthrough, i used it very easily. my question is when it's all done and after soft resetting. will it show the new speed? or does it still show the stock 528?

gono666 08-31-2010 04:38 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
Quote:
Originally Posted by shadixmax (Post 1930483)
I like this walkthrough, i used it very easily. my question is when it's all done and after soft resetting. will it show the new speed? or does it still show the stock 528?
to see your current speed just open Msm7kCpuSpeed located in your start menu,the stock speed still shows as 528 in the hardware information found under system settings but this is not the actual speed in which your cpu is currently running.

shadixmax 08-31-2010 04:55 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
oh, ok. thanks, another question then. it reads 633.6 i cant seem to get it to go higher. is this what you ment by it differ's by roms?

jdpman 08-31-2010 05:03 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
This seems overly complicated and confusing compared to the solution we already have thanks to nayr1482. Its basically just 3 steps with a GUI for setting all the options. You could have just made this thread link to the other thread which is already the ultimate OC guide for TP2...

Gorby 08-31-2010 05:07 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
Thanks for putting it together, this gives another option for people to try in case if they have issues with other methods. Nice work!

Please ignore the bashers. Most of the time it's people who contribute nothing complain the most.

gono666 08-31-2010 05:13 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
Quote:
Originally Posted by shadixmax (Post 1930518)
oh, ok. thanks, another question then. it reads 633.6 i cant seem to get it to go higher. is this what you ment by it differ's by roms?
if you followed all the steps on my guide,the only thing you want to double check the reg. key AutoPerformanceLevel found under HKLM\SOFTWARE\Msm7kCpuSpeed and change the value to 40 which is 768MHz

shadixmax 08-31-2010 05:19 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
alright, i checked everthing and its set to 40 like you said. now would that be 40 Dec? or Hex? or maybe i'm looking at it wrong hmm...

gono666 08-31-2010 05:23 PM
Re: ѠѳѺ Ultimate Overclocking Guide For TP2 ѺѳѠ
 
Quote:
Originally Posted by shadixmax (Post 1930554)
alright, i checked everthing and its set to 40 like you said. now would that be 40 Dec? or Hex? or maybe i'm looking at it wrong hmm...
40 decimal,you might have missed a step, double check the guide and make sure you covered all the spots =) let me know if you need more help.


All times are GMT -4. The time now is 12:19 AM.
Page 2 of 10 1 2 34 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0