PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)
-   -   Learn UC / XDA_UC / Registry / XML Provisioning / CAB Editing {2010-12-15} (http://forum.ppcgeeks.com/showthread.php?t=113189)

raidzero 03-19-2010 12:58 PM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Duck, great information! Do you know of a way to UC'ize bluetooth pairing? I would love to not have to pair every time I get in the car (only because I am always flashing lol) Seems to me the way bluetooth works this would not be possible but you never know. I have old BT technology that uses the same PIN over and over. (not MS Sync that generates PINs on the fly)

For my PC, it does generate a PIN on the fly, so I accept there is probably no way to automate pairing with that...

bsarlo 03-19-2010 04:38 PM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Would you help me understand this line in your Exchange xml code:

<parm name="MIMETruncation" value="51200"/>

I looked for this here but it only shows one digit for the value setting. What's up?

Then I found this page that is really cool daigram of Exchange characteristic to use. I see that the 5120 sets the allowing incoming message size to 5K and a value of -1 allows all of the message to be synced. I still don't fully understand the extra 0 on the 51200. Is this just a combination of the two link pages explanations? So you are allowing the incoming message to be 5K large with the 5120 and the zero at the end lets it truncate all body text? So let the whole body in but only if the entire message is under 5K?

If I didn't want any limit would I put -10 there instead of 51200?

NinjaDuck 03-19-2010 09:55 PM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Quote:

Originally Posted by bsarlo (Post 1643008)
Would you help me understand this line in your Exchange xml code:

<parm name="MIMETruncation" value="51200"/>

I looked for this here but it only shows one digit for the value setting. What's up?

Then I found this page that is really cool daigram of Exchange characteristic to use. I see that the 5120 sets the allowing incoming message size to 5K and a value of -1 allows all of the message to be synced. I still don't fully understand the extra 0 on the 51200. Is this just a combination of the two link pages explanations? So you are allowing the incoming message to be 5K large with the 5120 and the zero at the end lets it truncate all body text? So let the whole body in but only if the entire message is under 5K?

If I didn't want any limit would I put -10 there instead of 51200?

Simple Answer = Defect

Thanks for picking it up...

NinjaDuck 03-19-2010 10:01 PM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Quote:

Originally Posted by raidzero (Post 1642173)
Duck, great information! Do you know of a way to UC'ize bluetooth pairing? I would love to not have to pair every time I get in the car (only because I am always flashing lol) Seems to me the way bluetooth works this would not be possible but you never know. I have old BT technology that uses the same PIN over and over. (not MS Sync that generates PINs on the fly)

For my PC, it does generate a PIN on the fly, so I accept there is probably no way to automate pairing with that...

There is no Configuration provider to do the pairing, but I think you might be able to simple export your registry:

HKLM\Software\Microsoft\BlueTooth\Devices

It may not work since it takes two, but worth a try....

mlambert77 03-20-2010 02:12 AM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Two Questions:

1) How do you set up scripts for cabs that allow you to choose whether to install on device or storage card?

2) With cabs where it prompts you to restart after installation, is it ok to install several of them (or all of them) at once, then restart?

O'Neil Mitchell 03-20-2010 08:41 AM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Sticky

NinjaDuck 03-20-2010 01:51 PM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Quote:

Originally Posted by mlambert77 (Post 1644640)
Two Questions:

1) How do you set up scripts for cabs that allow you to choose whether to install on device or storage card?

If this is important to you, I recommend using Sashimi as a second step to install these cabs. Only install the cabs you want on your primary flash using UC. XDA_UC may be different.
Quote:

Originally Posted by mlambert77 (Post 1644640)
2) With cabs where it prompts you to restart after installation, is it ok to install several of them (or all of them) at once, then restart?

You should be fine to wait for the end of UC to reboot.

finalone 03-21-2010 02:05 AM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Awesome job! I was trying to mess around with UC on my own and you made it so much easier for me!

Maybe you know if these few things can be found in the registry (and where):

Login information for Facebook
Login information for Twitter
The order of your Manila tabs

NinjaDuck 03-21-2010 10:57 PM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Quote:

Originally Posted by finalone (Post 1646777)
Awesome job! I was trying to mess around with UC on my own and you made it so much easier for me!

Maybe you know if these few things can be found in the registry (and where):

Login information for Facebook
Login information for Twitter
The order of your Manila tabs

I do not use Facebook or Twitter, so I am not really sure if it will work, but this key seems promising:
HKEY_LOCAL_MACHINE\Software\HTC\HTCAccountManager

Let me know if it works and I will add it to the front post.

Tab order in Manila is easy:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila\Configurati on

Be careful as writing this data can cause problems when new tabs or when you switch ROMs. You will know there is a problem because when you go to reorder them through the UI, some may be missing.

finalone 03-21-2010 11:58 PM

Re: Learn UC / Registry / XML Provisioning / CAB Editing {2010-03-15}
 
Quote:

Originally Posted by NinjaDuck (Post 1648561)
I do not use Facebook or Twitter, so I am not really sure if it will work, but this key seems promising:
HKEY_LOCAL_MACHINE\Software\HTC\HTCAccountManager

Let me know if it works and I will add it to the front post.

Tab order in Manila is easy:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila\Configurati on

Be careful as writing this data can cause problems when new tabs or when you switch ROMs. You will know there is a problem because when you go to reorder them through the UI, some may be missing.

Hey, I'm going to try that HTCAccountManager key next time I flash and I'll let you know.

I'm already using the Configuration key and that selects which of the tabs are activated, but not the order. This is really an easy thing to manually adjust each flash, but I'm trying to see if I can get it to a point where everything is 100% ready to go right when I flash.

To pick your brain a little bit more, any idea which key turns on "Auto Adjust Backlight"?

Also, I know this isn't exactly the perfect thread for this...but it's related. I'm using a bunch of your cabs to turn off services/devices that I don't use. Once they are installed, is the effect permanent? Or do they need to stay installed on the device and uninstalling them reverses it?

Again, thanks for the great work. I'm sure I speak for a lot of people when I say you made my life a lot easier :)


All times are GMT -4. The time now is 12:05 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0