PPCGeeks - U.S. Cellular TP2 customers.

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)

- - U.S. Cellular TP2 customers. (http://forum.ppcgeeks.com/showthread.php?t=102066)

Re: U.S. Cellular TP2 customers.

Quote:

Originally Posted by chevy454 (Post 1477047)

Anyone running a crystal clock on a stock Wm6.5/2.1 ROM?

I think this is one I had no issues with > http://forum.ppcgeeks.com/attachment...1&d=1258251639

Re: U.S. Cellular TP2 customers.

http://forum.ppcgeeks.com/attachment...5&d=1261410790

Quote:

Originally Posted by murducky (Post 1477990)

Just found this thread a lot of good info here! I just put together my [Guide] USCC TP2 to EnergyROM

Check out let me know if there is anything missing or additions to help out future USCC

Very nice compilation! Don't fully agree with all choices, but that's where it's called "personalization". I tried NRG's ROMs and found the same issue with them as the stock ROM and actually worse, bloat. I just switched back from Winmo build 28014 to 21887 due to the same reason. I like MightyMike's ROMs due to their clean and clear nature, just the basics. Takes to customizations much better in my opinion.

My current configuration:
MightyROM WAR 12/30
Santod's new clock array (I love having a skinnable analog clock)
I have two clock skins installed for the array:
Santod's 2.5 Chrome Trans Flip
Jaguaralani MaxManila Single Ring Analog
num5kull's complete_panel_remove
num5kull's remove_top_&_bottom_curtain
Santod's 2.5 bubble slider cab here
psShutXP Power Key

Probably the best one of all:
Pegasus Modified Taskbar cab here Only taskbar I've found that doesn't display the NO-SIM notification. Only drawback, it displays EVDO connection as 3G (but does so flawlessly, still goes to 1x occasionally in bad reception as it should)

The ones that have became standards for me across all ROMs have been cRaCK*****'s Snooze Options, HouMing File Explorer Extention, the TP2 1% battery driver (built into many ROMs, install your custom taskbar of choice in your ROM of choice before installing it, it may be cooked in even if the ROM came without a taskbar), J.S. Advanced Configuration Tool 3.3 (mainly to speed up the end call button and change the boot screens), and PHM Registry Editor.

I typically run only the analog, but popped the flip up for the screenshot.

http://forum.ppcgeeks.com/attachment...1&d=1263202469

I liked NRG's background too.

Don't forget to hit the thanks button for these guys too, give em a donation if you're able, it keeps the newer sleeker stuff coming.

Re: U.S. Cellular TP2 customers.

Quote:

Originally Posted by mxATVracer10 (Post 1470938)

USCC Representin! lol Final day of the Black Friday sale TP2 getter here. I'm glad to see this thread because I've been looking into modding my phone but have been leary to try much for fear of bricking it. So thanks to the OP for starting this! Also thanks to drtechno for leading me to the answer for the "1 unread message" bug. :occasion5:.

Don't forget to hit the "THANKS" button on posts you find helpful. :D

Quote:

Originally Posted by mxATVracer10 (Post 1470938)

Is it just me or did US Cellular do it right and release the tp2 with most of the apps that other people were adding to their phones? It seems several of the add ons that I see in other threads are already on our phones, like the white tile clock, facebook and youtube apps, etc...

They would have done better to ship a naked WinMo+Sense and provided everything as "click to install" on the default home page, same as all carriers would have been better to do.

Quote:

Originally Posted by mxATVracer10 (Post 1470938)

Anyone know how to remove a password requirement that was added when I synced my work email to the phone? I have removed the email account but am still required to unlock the phone after it sits idle for 15 minutes. The "Prompt if phone unused for" box in settings>all settings>lock is grayed out so I cannot uncheck it.

I think it can be disabled from Settings tab, All Settings at the lower-left, then "Lock".

Re: U.S. Cellular TP2 customers.

Forgot I had the USB plugged in, screwed up the view of 3G in the taskbar.
http://forum.ppcgeeks.com/attachment...0&d=1263203433

Re: U.S. Cellular TP2 customers.

Quote:

Originally Posted by laymanspc (Post 1478090)

I think this is one I had no issues with > http://forum.ppcgeeks.com/attachment...1&d=1258251639

That's for 2.5 Manilla...I need one for the stock 2.1...thanks, though!

Re: U.S. Cellular TP2 customers.

ne1 using mighty rom war or impact get the mms fixed? i added the server like he said and still cant send or receive pics. if u have plz post so i can fix mine or ill flash back to stock never had a problem there.

Re: U.S. Cellular TP2 customers.

Quote:

Originally Posted by chevy454 (Post 1478547)

That's for 2.5 Manilla...I need one for the stock 2.1...thanks, though!

For 2.1, comes from the "Competely Clear Today Screen [SENSE UI 2.1]" mods by Pegasus located in the THEMES section.

Re: U.S. Cellular TP2 customers.

Quote:

Originally Posted by hunter7773 (Post 1479706)

I've tested IMPACT and have used WAR off and on since the 30th. Been running WAR all weekend and think this is how my phone will remain for it's lifetime.

If you used the info from POST5 of Mighty's thread, it is wrong for USCC customers. It is simply listed as uscc.com instead of uscc.net. It's mentioned several times throughout his thread with corrected instructions and the likes.

MMS works fine for me in all of Mighty's ROMs (have used MR classic, impact, love and war) using the instructions HERE. Anytime I've not set it up very first thing, I've always had issues. There is another post within that thread that states USCC has two servers that handle MMS. I am not sure if they may be region specific or not. Try changing the address from http://mmsc1.uscc.net to http://mmsc2.uscc.net to see if that gets you working. Another big one people miss is setting the WAP to NONE. You have to scroll down in the settings to get to it and most folk miss it. Let us know if that works for you and good luck!

Re: U.S. Cellular TP2 customers.

no luck went and redid all server settings again, to make sure i didnt miss nething or forget a cap somewhere. still nothin faild to send and daild to receive.

Re: U.S. Cellular TP2 customers.

Quote:

Originally Posted by hunter7773 (Post 1479850)

no luck went and redid all server settings again, to make sure i didnt miss nething or forget a cap somewhere. still nothin faild to send and daild to receive.

Weird, order I've always done mine in is:
#1 hard reset
#2 Carrier Provisioning
#3 MMS server settings (don't change any other settings (like delivery confirmations and such) while setting the MMS server)
#4 test

Never been an issue other than times I've screwed up and not provisioned first thing after the hard reset (using 'clear storage' in start>settings>system) (even setting a ringtone before provisioning even seemed to create an issue for me one time). I've never unlocked the radio, it is stock USCC. The mmsc1 URL has worked for me in WV and I've never tried mmsc2 (if it ain't broke don't fix it), but had seen it stated in Mighty's thread.

It is a picky process, but does work (for most of us anyway).