HTC TP2 Unlocked GSM with CDMA rom - frozen screen (tmobile)

[pampers37]

I have Tmobile HTC TP2

ran manually unlock on phone (for GSM - i believe): SSPL-Manual-RhodiumV1_10.exe

ran mightyrom (for CDMA... dumb of me): MightyROM_RhodiumW_120609

now it freezes on boot screen.

it reads:
B 80
R 3.45.25.14
P 61.27t.25.23W
D2.01.69306

now i cannot get activesync to recognize my ppc. i tried soft/hard reset. now tried to connect at bootloader - it reads USB at bottom but won't sync. please help!

Thanks! pamps

[clueless25]

Expensive paperweight.

[dslayton]

If he can get to the bootloader mode, all hope might not be lost. Try finding a stock tmo tp2 rom. Try flashing that from the bootloader screen. (It won't connect thru activesync or device center...but just flash anyway...it should recognize it)

[drewcam888]

I would try to flash using sd card instead of usb cable.

[Adrianh85]

Originally Posted by drewcam888

I would try to flash using sd card instead of usb cable.

i agree , op check my sig!! if this dont work using the button combo u will have one pretty brick!!

[vick2080]

ok does this have to be FAT or only FAT32?
i am trying to flash from my 4gb Class 4 Microsd(not using the .exe bootloader, i manualy enter the boot loader)
i used to be able to before, now i move any .nbh to the card and it says "no image file"
sorry if this deviates from the topic
thoughts?

[drewcam888]

I think it has to be 2gb or less formatted fat32

[pampers37]

YAY - all i had to do was put on a proper rom.. no pretty paperweight here. thank you all for your help!

[Adrianh85]

Originally Posted by pampers37

YAY - all i had to do was put on a proper rom.. no pretty paperweight here. thank you all for your help!

good to here