Solved HTC EXT usb multi adapter wiring colors! New pics and a video

[gator2k83]

I got it all wired up and installed in my car the way I wanted to. It took some trial and error but the wire diagram from the previous post is correct, however on the mogul's adapter that comes with the phone the yellow wire is not hooked to anything on ether end its just in there it was not attached to the mini 2.5mm jack and it pulled straight out of the phone 11 pin end no loose wires or solder on ether end of the yellow wire just a clean cut.

Here is what i used to make it work.


White - Mic +
Yellow - was not hooked up to anything
Red - Ground L/R
Blue - Headset sense hooks into the red to turn headset mode on.
Green - Speaker +
Black - Speaker +
Ground/Shielding silver loose no coating - I hooked to the signal wire from the mic.
Mic Ground - red and blue wires.

As the stock headset has 3 wires for the mic. +,-,and S their colors are White - mic +
Copper - mic -
Blue - S

The push to answer button does not work on the headset mic but the mic does work. I think it has to so with the fact that i didn't hook up the other wires to the board going to the adapter. I ran out of wires and didn't have a long enough cable that had all the needed wires so i clipped all but the 3 i needed off the circut board for the mic and ran a new longer 3 wire cable from the board to the adapter.

I have to get ready for a christmas party in dc thats 2 hours away. I will post finished pictures and maybe a youtube video if the finished install once I get back to town.

Sound comes out clear thru my speakers and I was able to hold a conversation with the mic as a hands free in the car. The mic is mouned at the top of the drivers side a pillar and the wire runs down in behind that into the dash and comes out right by the phone mount.

Now I can leave my car charger hooked to the adapter and the headphone output is wired into the car stero so one connection to the phone and i have mic + audio out. Cost was just some of my free time and parts/wires i already had laying around. I did take extra time to be neat and soldered all the connections properly. This is as close to an aftermarket oem integrated system that i wanted.

Thanks to all that helped I will post the results later, for those interested.

[jhw549]

if you can post pictures and such that would be great, having seen this I'm starting to formulate my own ideas on creating an in car hands-free system...

[gator2k83]

no problem i'm off to give it the real world test in D.C. Wish me luck. Big party tonight for my Fiance' s work @ the new Gaylord National Resort in the New Harbor area.

[gator2k83]

Many days later and I finally had some time to snap a pic and shoot a small video.

I moved the images that i had posted earlier into an album with the ones i took tonight. For some unknown reason it will not let me edit the post it just sits there with the circle moving around and never saves the edit. So let me show those again for newcomers to the thread first.

adapter that I used to make my carkit




Different angle on the adapter.



The look I was going for not a pic of my car but an example with the same make and model as mine as I didn't have time to shoot a pic.



Now for some finished product pics please don't judge the shape my car is in as it is a work in progress and needs some parts and some tlc.





This is the stock mic off the headset that came with the phone only rewired as just a mic no earbuds.




and yes if you are wondering i home made the car mount myself out of some black house wire 12guage solid copper that i just bent into the shape that i wanted to hold the cell and i think it looks decent/ For free it aint bad =D>.





I am uploading a short video of it working in the car with some demo functions that i use it for. I will have to post that in a seperate post as i can't edit and add to the end of this post.

Logged in under IE7 and went to advanced so now i can edit.. must be a bug with firefox 3