Post 3.35.04 Radio speeds here - Page 7

Mach30SiR · #61 (**permalink**) 03-12-2008, 12:21 PM

teathered with it disabled (left it the way the ROM put it)

Your current bandwidth reading is:

821.80kbps - mobilespeedtest.com teathered - so i guess its working

osva · #62 (**permalink**) 03-12-2008, 12:42 PM

Can someone post your Home agent address (HA address) please.

#63 (**permalink**) 03-12-2008, 12:43 PM

well the results and opinions on the matter are way to inconsistant for me to listen to anyone,...no offense...i think the only way to be fair is for everyone to do their own speed test and decide for themselves if it should be enabled or disabled....my results are below for those interested...and as for me im leaving mine enabled...

disabled 645.3 kbps
enabled 932.1 kbps

and i conducted my tests at www.mobilespeedtest.com
also i live in indianapolis, indiana if that matters...

**Baffles** · #64 (**permalink**) 03-12-2008, 02:07 PM

Quote:

Originally Posted by vincemas

this cannot possibly be right....using WMWifiRouter??

whats the max Rev A speed possible?

okay....tested again below different server.....something def amiss

using my own cooked rom from DCD....along with new radio

Haha, try speakeasy.net/speedtest. Looks like your browser or something might have been caching speedtest.net, not sure.

chelboed · #65 (**permalink**) 03-12-2008, 03:15 PM

What do I need to DL to be able to use speakeasy.net on my Mogul? I have Flash7. It starts the DL and then PIE closes.

jbg772 · #66 (**permalink**) 03-12-2008, 05:22 PM

ok, i got the leaked 3.16 update because i needed rev. a... i upgraded to the official 3.35 release today, did the switcharoo in the ##778# menu and im pretty much pulling the same speeds I was with the leaked rom/radio. is this the same for everyone else? im assuming its strictly my signal strength thats not getting me the speeds you guys are posting, im right around 1200 down and 130 up, but if i could get near 2000 down and 300 up i would be a happy camper.

seeneed4speed · #67 (**permalink**) 03-12-2008, 05:51 PM

received confirmation "We have since duplicated the speeds through multiple speed tests on both the device browser and PAM, and if the data parameter is changed to Rev A – enabled; it will disable Rev A and the customer will experience slower download speeds and nothing close to the Rev A upload speed." the big speed diffrences are between device (and browser being used) versus tethering.

Ovendoor · #68 (**permalink**) 03-12-2008, 05:52 PM

I'm pretty consistent here in Indy.

jbg772 · #69 (**permalink**) 03-12-2008, 06:06 PM

Quote:

Originally Posted by seeneed4speed

received confirmation "We have since duplicated the speeds through multiple speed tests on both the device browser and PAM, and if the data parameter is changed to Rev A – enabled; it will disable Rev A and the customer will experience slower download speeds and nothing close to the Rev A upload speed." the big speed diffrences are between device (and browser being used) versus tethering.

wow, this actually seems accurate. just changed the ##778# option back to what it was and my upload speeds are up to 572kbps..

HobbesIsReal · #70 (**permalink**) 03-12-2008, 06:40 PM

Try this one....

http://www.dslreports.com/mspeed?jisok=1

I first get an error message saying the connect is to fast and makes me select a bigger sized file. I selected the 1 mb file. I will vary but I range between 680-750 kbit/sec at two bars (my house always blocks some of my signal). I am in the Portland, OR area.