Codes for Sprint Mogul PPC-6800

[pflatlyne]

I found this looking through my registry so I have posted the results here in case it is of use to anyone. I havent tried adding anything of my own to this yet,but it suggest the possibility of adding your own programs on key sequences to the dialer.


[HKEY_LOCAL_MACHINE\Services\PhoneExt\KeyProgram]
"Key10"="#38278"
"Prog10"="Fuart.exe Fuart"
"Key9"="#3424"
"Prog9"="DMRouter.exe /OPEN_MODEM_PORT"
"Key8"="#33284"
"Prog8"="FieldTrial.exe"
"Key7"="#3386"
"Prog7"="DDTM.exe"
"Key6"="#775"
"Prog6"="EPST.exe ##775"
"Key5"="#3282"
"Prog5"="EPST.exe ##3282"
"Key4"="#7738"
"Prog4"="EPST.exe ##7738"
"Key3"="#2539"
"Prog3"="EPST.exe ##2539"
"Key2"="#8626337"
"Prog2"="EPST.exe ##8626337"
"Key1"="#786"
"Prog1"="EPST.exe ##786"
"Postfix"="#"
"Key0"="#778"
"Prog0"="EPST.exe ##778"
"Prefix"="#"





##38278# Enable or Disable Fast UART mode (whatever that is). Resets device after choosing. This seems to be connected with ##3424#

##3424# Runs something called DMT v1.5. It has status indicators for Tx and Rx.If you have fast UART mode enabled,it tells you to disable fast uart mode after you are finished logging.

##33284# Opens a diagnostic menu that shows information about the phones hardware.This seems to be read only.

##3386# Enable or disable DDTM. On my Samsung A-920 this determines whether a call rings through when your on the internet or goes strait to voice mail. I assume it does the same thing here.

##775# Brings up a menu with a single setting called "Update PRL" Its a field that wants text or a number when edited. Its blank on my phone.

##3282# Two menus that show you your user name information for the internet and an advanced menu that shows many other settings. The P-rev setting is also available on this screen imlying that this may have something to do with the internet connectivity. I first learned of this menu when I called sprint tech support to fix a 67 error connecting to power vision. She had me try to reset the internet information here using the reset option on the menu but it didnt work.

##7738# Allows you to set the protocol revision. Mine is set to IS-2000(6) by default. Other options are J-STD-008(1) IS95A+TSB74(3)

##2539# Allows you to enter or set an authentication key (A-Key). Mine does not have one by default.

##8626337# Edit vocoder settings.Home Orig: Default is EVRC Other options are "IS96A Voice 13K - IS733" "SMV" "Voice 13k"

##786# Resets entire phone to factory settings.After we tried to reset the internet settings she had me use this option to reset the entire phone. This wipes out everything including stored phone numbers,call history and completely resets the windows mobile installation to factory defaults removing anything you have done. It differs from holding the reset and pressing the softkeys in that it resets the phone as well. This fixed my problem (that time and several times since) Before you can use your phone again you will need to reset the MSID and MDMI

##MSL# MSL here is your master service lock code. This code is needed to enter any of these service menus. If you dont have it,call sprint and ask for it. If they wont give it to you,call them and tell them you cant connect to the internet and get a 67 error connecting to power vision. They will walk you through lots of service menus. Write everything down. One of the things they will give you is your MSL code. If your really lucky they will have give you new service menu codes that we dont already know about. If your MSL is 123456 then you enter ##123456# . In this menu you have the option to set the MSID and MDMI. After reset they have default vaules. You should set them to your phone number and area code. For instance,if your phone number is 330-555-5555 then set them both to 3305555555 . You wont be able to use the phone untill this is done if you have done a reset.

##778# Works like running EPST with no parameters.