2.16 rom with radio 1.40

[2kmy477]

Originally Posted by dan3284

I've ended up in the scenario you described, and here's what I did:

-Updated to 2.16 from the download off HTC's site.

-Found that it fixed things as advertised, but it made the phone lock up continually for me, as described elsewhere. From there, I downloaded the 1.40 Radio RUU and the RUU utility from the FTP link provided in step 2 of the "Titan Flashing for Dummies" sticky. The RUU utility is in /Titan/Users/ImCoKeMaN/roms/ and the 1.40 radio is in /Titan/Users/dcd/ on the FTP link.

-I wasn't sure if I'd need to run the Unlocker, but I did, and I did have it stay stuck in the bootloader. However, instead of continuing with the directions about what to do when you get stuck in the bootloader, that is when I flashed in the new radio with RUU, and then everything came back alive and was happy. Even though, to my understanding, all I pushed at the phone was the "Radio" code, it was as if I'd done a hard reset so I had to reload software and settings again, but other than that, no troubles.

My phone has been acting teriffic compared to just having the stock 2.16 on it. I don't think I've had to soft reset since I've done this. I hope this is helpful.

I followed your instruction.Unlocked the phone,run RUU and pointed to radio 1.40,but it stucked at 0% and goes no where,what did i do wrong?should i put the 1.40 radio into another folder?

[idiotekniQues]

Originally Posted by 2kmy477

I followed your instruction.Unlocked the phone,run RUU and pointed to radio 1.40,but it stucked at 0% and goes no where,what did i do wrong?should i put the 1.40 radio into another folder?

you put the 1.40 radio file into the folder of the RUU before you run the setup file of the RUU

[2kmy477]

Originally Posted by idiotekniQues

you put the 1.40 radio file into the folder of the RUU before you run the setup file of the RUU

I did put the 1.40 file into the RUU folder and ran ROMUpdateUtility.exe,but it stucked at 0% when it tried to flash.

[herbster]

With my with my 6th grade diploma, and seeing 2kmy477 having trouble I am chix to go for it. And to think I started this thread.

[2kmy477]

Originally Posted by 2kmy477

I did put the 1.40 file into the RUU folder and ran ROMUpdateUtility.exe,but it stucked at 0% when it tried to flash.

I even did a hard reset after done with the unlocker and put the 1.40 radio in c:\RUU,it just stucked at 0%.

[idiotekniQues]

im not sure what your options are since this was my first time.

i know it worked on mine i see the rom version is the new one and the radio is 1.40 and my bt hasnt disconnected in an hour

early yet but already better than before.

[herbster]

2K-someone here will help you. I had a guy one night let me call him and walked me thru a prob online for like almost an hour. Keep looking thru threads for "stuck at 0". I remember someone else had this problem. You got balls for going for it and it will work out. I will try when I get bigger balls.

[muyoso]

it stopped at 0% for me as well, but i figured out why. You need to unlock the phone. This is what I just did in order

run TitanUnlocker.exe
- after pressing unlock, follow the directions, there will be a popup with a ROM installer, where you need to install HardSPL

After running that, if your phone is stuck on the screen with multiple colors, you are going to have to run titan_exitbl.exe. To run it, you must go to activesync and go to File>Connection Settings> and UNCHECK the USB connections. Click OK and then go back to titan_exitbl.exe and run it again.

Place the ruu_signed.nbh in the RUU Folder. Go to ROMupdateutility.exe and follow the prompts. It should take about 2 full mins to finish. After that you are good to go.


It DID completely wipe my phone the same was as if I installed a new ROM. Didn't expect that, guess I have to stay up another 40 mins to get my phone setup right.

[idiotekniQues]

hey 2k. are u sure you followed the instructions just right to unlock it maybe, so that is why it wont install the rom if the phone is not unlocked.


did you disconnect and reconnect the usb plug as instructed during the unlock process?

[DogGuy]

2kmy477... did you go *all* the way through the steps with the unlocker, ending with a 1.20 Olipro bootloader?

edit: ... nm.. got beat to the punch :P