PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Evo 3D Development (http://forum.ppcgeeks.com/forumdisplay.php?f=322)
-   -   [ROM] OMJ's HTC EVO 3D Custom ROMs | 1.13652.1 ICS!!! | 4.0.3 | Updated *5/17/12* (http://forum.ppcgeeks.com/showthread.php?t=144941)

itsall_cooool 05-10-2012 08:09 PM

Re: [ROM] OMJ's HTC EVO 3D Custom ROMs | 1.13652.1 ICS!!! | 4.0.3 | Updated *5/9/12*
 
I would re-download the rom zip and redo the steps you've done already, had same issue on another ics rom.

If you get stuck at that screen will have to pull battery to turn off fastboot to get into recovery, connect usb cable and mount sd to place new download on sdcard, then wipe and reflash. Good luck.

robysch22 05-10-2012 08:58 PM

Re: [ROM] OMJ's HTC EVO 3D Custom ROMs | 1.13652.1 ICS!!! | 4.0.3 | Updated *5/9/12*
 
File corruption can be ruled out.
I re-downloaded the .zip file and formatted the SD card…… still stuck on HTC after install

robysch22 05-10-2012 09:36 PM

Re: [ROM] OMJ's HTC EVO 3D Custom ROMs | 1.13652.1 ICS!!! | 4.0.3 | Updated *5/9/12*
 
I tried ICS 3.0….. doing the same thing…

b4u2 05-10-2012 11:22 PM

Are there "standard" settings with this latest version or should I go in and play with the tweaks?

Sent from my PG86100 using PPCGeeks

xeagle24 05-11-2012 02:32 AM

maybe a bad flash? I can confirm the camera icon works & 3d pix too

Done , I re flashed the rom, and It's working ok, thanx

Sent from my PG86100 using PPCGeeks

OMJ 05-11-2012 10:24 AM

Re: [ROM] OMJ's HTC EVO 3D Custom ROMs | 1.13652.1 ICS!!! | 4.0.3 | Updated *5/9/12*
 
Quote:

Originally Posted by jae.farah (Post 2178165)
Thank You For The Quick Reply. I Don't Know Too Much about all This But I Know That I Have The 1.5 Bootloader and am S-on. Will I Still Be Able To Update The Firmware?? . And If So . Would all This Be Easier If I were To Just Go To V2.7 First??

Thank You

copy the firmware files to your sd card, rename it to PG86IMG.zip. Then either reboot into bootloader, or power down, the hold volume down + power to boot into bootloader. Once in bootloader, it will see the PG86IMG.zip & prompt u to update the firmware. Once updated, go thru you're normal procedure to flash a ROM when u have 1.50 hboot


Quote:

Originally Posted by princem131 (Post 2178174)
I am in love with this ROM and the v 3.1 with the leedroid tweaks just pushed it over the top. ICS is so sweet I really feel conflicted gettin this so close to the Evo 4G LTE. Sprint would be wise to hold off this could persuade alot of potential upgraders to hold out. I'm going to be dying to get a custom rom on that E4GLTE!

Positive Vibrations

agree 100%....but I'm still gonna get the EVo LTE, it will be just that much better, plus it basically wont cost me anything...hell I may even make $$$ after selling my 3D


Quote:

Originally Posted by robysch22 (Post 2178201)
I tried ICS 3.0….. doing the same thing…

hmmm, odd....are u on hboot 1.50?

Quote:

Originally Posted by b4u2 (Post 2178232)
Are there "standard" settings with this latest version or should I go in and play with the tweaks?

Sent from my PG86100 using PPCGeeks

umm, there are some default settings, but I would go explore ;)

robysch22 05-11-2012 04:56 PM

Re: [ROM] OMJ's HTC EVO 3D Custom ROMs | 1.13652.1 ICS!!! | 4.0.3 | Updated *5/9/12*
 
Hi OMJ, Yes i am on hboot 1.50 + S-ON CWM v4.0.1.4

OMJ 05-11-2012 06:12 PM

Re: [ROM] OMJ's HTC EVO 3D Custom ROMs | 1.13652.1 ICS!!! | 4.0.3 | Updated *5/9/12*
 
Quote:

Originally Posted by robysch22 (Post 2178359)
Hi OMJ, Yes i am on hboot 1.50 + S-ON CWM v4.0.1.4

I'm no 1.50 expert but don't u need to go thru fastbook then recovery to flash?

Karl 05-11-2012 06:52 PM

Re: [ROM] OMJ's HTC EVO 3D Custom ROMs | 1.13652.1 ICS!!! | 4.0.3 | Updated *5/9/12*
 
OMJ is correct
here is the how to
[GUIDE] HTC Unlock Hboot 1.50 + TWRP Recovery + Root + Flash!! [9.11.11] - xda-developers

smitch00 05-12-2012 09:19 AM

Re: [ROM] OMJ's HTC EVO 3D Custom ROMs | 1.13652.1 ICS!!! | 4.0.3 | Updated *5/9/12*
 
My PRL version is different than your screenshot. Mine is 21081, yours shows 21086.

I updated using the file you supplied a couple days ago, but my PRL didn't update.

Anyone have a link/help to get this updated?

http://www.quigdog.com/graphics/prl.jpg


All times are GMT -4. The time now is 12:36 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0