How do I change my SPC# ?

KingArthur · #1 (**permalink**) 12-19-2008, 05:23 PM

I have my diamond flashed to cricket already and it works great. I want to know how do I change the spc number to 000000. What program to use and what to do. I searched but did find it or missed it. I just need some simple step by step directions.

k0rvan · #2 (**permalink**) 12-19-2008, 07:55 PM

the spc should be set to 000000 alredy, to check go to the key pad and press ##000000# and see if the epst comes up

kaeslumz · #3 (**permalink**) 12-19-2008, 08:05 PM

Quote:

Originally Posted by KingArthur

I have my diamond flashed to cricket already and it works great. I want to know how do I change the spc number to 000000. What program to use and what to do. I searched but did find it or missed it. I just need some simple step by step directions.

cdma workshop and qpst are programs you want to use..cdma workshop to be specific but they kinda work with each other..

motoyola · #4 (**permalink**) 12-19-2008, 08:05 PM

you need CDMA workshop. then you need to dump the memory

Cellfreak · #5 (**permalink**) 12-19-2008, 09:02 PM

Quote:

Originally Posted by motoyola

you need CDMA workshop. then you need to dump the memory

Check on Howards Forum Its all posted there.

KingArthur · #6 (**permalink**) 12-21-2008, 12:46 AM

I am using the spc# that was stock with phone. I would like to change it to 00000. I have check this forum and howardforum for drivers, qpst, and spc. It is a big list because all the threads have those word in it and that make it hard to find what I need.

I have download qpst but when i put the phone in diag mode...my computer is looking for a driver but can't find it. Where do I find the driver I need?

ivan1.ruiz · #7 (**permalink**) 12-31-2008, 04:47 PM

I need to change the same on my apache. but cdma workshop connects but does not read i get an error saying that the phone does not answer

**stevedog1** · #8 (**permalink**) 12-31-2008, 06:01 PM

You will need to use QPST to change it to "000000" but in order to use it, it will ask for the phone's current SPC. If you do not know what it is, you can use this program to retrieve it for you. Good luck.

ivan1.ruiz · #9 (**permalink**) 01-01-2009, 12:40 AM

how do i use qsp.. i have it now but it comes with a bunch of programs

KingArthur · #10 (**permalink**) 01-01-2009, 03:48 AM

It took me awhile to figure it out because I could get much help at the time. Here's what I did:

1. Find and download the modem driver for the diamond the install on your PC.
2. I pulled up my phone via USB to computer
3. Dial ##3424#
4. Open the program in QPST that has the com port ( i forget which program) and press add port...You should see the port with your phone on it...select that one.
5. Then open service program in Qpst...enter in your original MSL#...from here you should figure it out.

I don't have the program on my computer anymore, I was going off of memory. This is a rough draft but it will be close enough.