Internet Sharing over Wi-Fi AP Tethering

[indoe]

I have figured out how to use Internet Sharing over WiFi, which essentially makes my Hermes an Access Point.

Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (it should currently be "BTPAN1").
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).

And it works!

When I used it I was only able to get one client to connect, however there is a reg value, HKLM\Comm\BTPAN1\Parms\MaxConnections that may help if it is changed from 1 to 2 (or whatever). But I haven't tried.

Interestingly, while IS was enabled, wifi stayed on and connected when the phone went to standby mode. Normally wifi turns off to save battery during standby. So that's a good thing, although I imagine this will drain your battery in a hot minute, so bring your charger.

I was going to release a patched intshare.dll so that the normal Internet Sharing utility can do this, but I'm having trouble changing the section addresses in the dll to the right values after I add data. If anyone knows how to do this PM me and I'll give you the details.

best,
fluxist

I have been trying to get this to work anyone get this to work with 6700 WM5?

http://forum.xda-developers.com/showthread.php?t=332360

[dprout69]

what kind of router do you have? 192.168.1.1 is for linksys

[indoe]

Originally Posted by dprout69

what kind of router do you have? 192.168.1.1 is for linksys

No the post is about turning your phone into a router and use the Ev off it but looks like its only working for WM6

[computercarl]

Originally Posted by indoe

No the post is about turning your phone into a router and use the Ev off it but looks like its only working for WM6

Then I'm confuzed, dont we have wm6 for the apache?

[indoe]

Originally Posted by computercarl

Then I'm confuzed, dont we have wm6 for the apache?

yes but i still use WM5 i want to know if anyone have been able to get this to work with WM5

this is big Tethering with wifi never been done before with out proxy server and other crap

[ppc6700freak]

Wow, I tried to do this eons ago with the java emulator and some other mumbo-jumbo...

I am running the helmi_c's 3.5 from the new kitchen. I set the TIACXWLN1 to static IPA, 192.168.1.1/24 with gateway 192.168.1.1.

created a ad-hoc wifi connection, open with encryption disabled.

turned on ics with blue tooth PAN

made the regedit

went to my laptop and connected to the ad-hoc I created on the 6700, it received ipa 192.168.1.136.

I am composing this message via it now...

I found that if the device suspends it turns off WIFI and I loose the connection, no biggie... now to see is i can connect a second pc to the 6700-wap.

Thanks all....

[indoe]

Originally Posted by ppc6700freak

Wow, I tried to do this eons ago with the java emulator and some other mumbo-jumbo...

I am running the helmi_c's 3.5 from the new kitchen. I set the TIACXWLN1 to static IPA, 192.168.1.1/24 with gateway 192.168.1.1.

created a ad-hoc wifi connection, open with encryption disabled.

turned on ics with blue tooth PAN

made the regedit

went to my laptop and connected to the ad-hoc I created on the 6700, it received ipa 192.168.1.136.

I am composing this message via it now...

I found that if the device suspends it turns off WIFI and I loose the connection, no biggie... now to see is i can connect a second pc to the 6700-wap.

Thanks all....

me to so you were able to get it to work with WM5?

so you changed "tiacxwln compatible wireless ethernet" ?

[Gervy]

Originally Posted by dprout69

what kind of router do you have? 192.168.1.1 is for linksys

Actually, any 192.168.x.x (such as 192.168.1.1) is an internal IP scheme used in many networks. By default, most home routers (wireless or not) assign 192.168.1.1 to the router as the home or gateway device.

[stifiling]

this link appears to have resolved my dc issue using a mortscript file.

http://forum.brighthand.com/showthre...47#post1588347

[BigDaddy718]

Do you know how to get Wi-fi on the Treo 700wx?