XV6700 will not sync! Please Help!!!

[nimrod.sixty9]

Originally Posted by weedahoe

This is my worry here. If you connect the device to the computer via USB while in BL mode and it never changes from Serial to USB then you cannot proceed. The PC must be able to detect the device correctly first. Im sry if this is a repeat question but have you tried to connect this same phone to a different computer with a different cable? If not to a different PC and with a different cable then do so. If you have and it still didnt work then you need a new device.

Three different PC's and two different cables

Well looks like Im picking up the digitizer from the post office tomorrow. I may not be able to upgrade but at least I can still use it for other things. Well at least I hope the digitizer will get me past the align screen.

When I took her apart, I didnt see anything out of the ordinary. The solder joints were fine and strong... At least it was easy to take apart. Wont be so hard the put in the digitizer.

Just won a 6700 (Qwest) off of eBay. Ill be playing with that soon.

UPDATE: Ok so I got the digitizer and went to install it. And when I get into the LCD area I realize I have a half cracked ribbon cable. So Im done with this thing. FINALLY

Ill see you guys when the other 6700 comes in! Thanks for all your help guys!