![]() |
Re: PDAJ's Clean WM6.1 ROM
Quote:
|
Re: PDAJ's Clean WM6.1 ROM
Just tried 1.0 NoID
Error 150: ROM UPGRADE UTILITY ERROR This ROM Upgrade Utility is not designed for your device. Please get the proper ROM Upgrade Utility and try again! Sidenote: phone country was set to Japan before I attempted to upgrade. I tried to exit bootloader mode but failed. Phone is stuck in bootloader mode v1.0 =/ hm... any ideas? |
Re: PDAJ's Clean WM6.1 ROM
Quote:
|
Re: PDAJ's Clean WM6.1 ROM
Everything seems to have worked right up the end. It keeps hanging on "Running TPEnable.exe".
Update: It's working now - just did a soft reboot and it came right up. |
Re: PDAJ's Clean WM6.1 ROM
Few questions about this FANTASTIC Rom. :-) and the PDA.
1) How do you change the first splash screen from the Black Cooked HTC one back to the simple stock white Verizon Wireless one??? 2) Any way to add a GPS radio or 3G to these things??.. LOL 3) Anyway to repair a screen?, I sorta dug a rough line into the LCD from frustration with the scroll bar and pocket IE. (thank god for ICS in this 6.1 ROM and WMwifirouter) |
Re: PDAJ's Clean WM6.1 ROM
Quote:
1. There is a software around for it. Search around, I don't remember what it's called. 2. GPS is a no go on the 6700. There is no chip in it. You need a bluetooth reciever. EVDO is the same as 3G, so if your provider has that, then you're at 3G speed. 3. Find some old screens or phones on ebay, not hard to replace. |
Re: PDAJ's Clean WM6.1 ROM
I have Verizon XV6700 with v2.05 bootloader.
Hard Reset Go into Bootloader Connect to PC Run RUU from PDAJ Apache WM6.1 v2.05 ERROR 120: COUNTRY ID ERROR 49-49-UUULc568-N-N The ROM image that you are trying to use is not designed to work on your deivce. Please check the vender Web site and download the correct ROM update. Any ideas? |
Re: PDAJ's Clean WM6.1 ROM
Quote:
In that case, which is rare, revert bootloader to v2.02 with the sticky at top of fourm. Then download the v2.02 ROM. |
Re: PDAJ's Clean WM6.1 ROM
Ok, so now I am in trouble...
I couldn't get this Clean ROM to work, so I cooked one up the the kitchen real quick. The new ROM loaded on to the Apache fine, but now I am stuck at the initial boot screen. Now what do I do? |
Re: PDAJ's Clean WM6.1 ROM
I get this: error 120 Country ID error
|
Re: PDAJ's Clean WM6.1 ROM
does it matter what bootloader you have?
|
Re: PDAJ's Clean WM6.1 ROM
Quote:
|
Re: PDAJ's Clean WM6.1 ROM
Quote:
|
Re: PDAJ's Clean WM6.1 ROM
I had the v2.05 on mine, but kept getting the No Country Errors. Reverted to 2.02, skipped steps 13 and later and went strait to the 6.1 upgrade from here. That worked and loaded the new OS. Hopefully I can play with this for a little bit and then customize it a bit in Build OS.
|
Re: PDAJ's Clean WM6.1 ROM
Hey guys i have bootloader 2.02 and it loaded like a charm they only issue is the memory card not reading and the camera that don't turn off but only using task manager
|
Re: PDAJ's Clean WM6.1 ROM
Quote:
|
Re: PDAJ's Clean WM6.1 ROM
Quote:
|
Re: PDAJ's Clean WM6.1 ROM
Hey dude,I havea verizon xv6700 it says i have v2.05 but wheni runthe ruu fileit says somethingto do with image something whagt do i do?](*,)
|
Re: PDAJ's Clean WM6.1 ROM
Ok, had bl 2.02. downloaded and ran the program, now phone is stuck in bootloader mode. sorry if this has been asked, i did all available research i could. im tryin to work on 3 different phones right now, mogul, vogue and apache. im sure i made some mistake somewhere but idk where. from everything that ive read, ive done everything i needed to. verified my rom version and whatnot. but now its stuck at bl screen. any suggestions anyone?
|
Re: PDAJ's Clean WM6.1 ROM
Quote:
|
Re: PDAJ's Clean WM6.1 ROM
I have WinXP.
My xv6700 is v2.02, and downloaded the matching file. but it froze at 44%. it's been at 44% for the last 10min. so i rebooted xv6700, and started over again. it froze again at 44%. HELP! |
Re: PDAJ's Clean WM6.1 ROM
Since wm6.1 install went fubar, i installed Verizon's original WM5.1.
it worked, but for some reason it upgraded my xv6700 to v2.05. i downlaoded PDAJ's Clean WM6.1 ROM for v2.05. It gives me Error120 Country ID Error. Now what? THX! |
Re: PDAJ's Clean WM6.1 ROM
Quote:
|
Re: PDAJ's Clean WM6.1 ROM
Quote:
](*,) anyway, got the image loaded. THX PDAJ for the image! |
Re: PDAJ's Clean WM6.1 ROM
Wow, that's a lot of posts in a row Jedi. It worked on XP because of your bad drivers. Please read and follow uides before diving into flashing.
|
Re: PDAJ's Clean WM6.1 ROM
The 1.02 bootloader link seems to be down? Can these links be mirrored anywhere?
|
Re: PDAJ's Clean WM6.1 ROM
I need PDAJ's Clean WM6.1 Apache ROM but none of the Links in PDAJ post can download the files. I need version 1.04 Bootloader. Can some one give me link Thanks...
PDAJ's Clean WM6.1 Apache ROM |
Re: PDAJ's Clean WM6.1 ROM
the link in MediaFire cannot find the files to be downloaded I am looking for the PDAJ's Clean WM6.1 ROM for my Verizon PPC XV6700 with 1.04 Loader- Can anyone provide me a download link?
|
Re: PDAJ's Clean WM6.1 ROM
links are dead in OP
|
Re: PDAJ's Clean WM6.1 ROM
The links are down for these PDAJ's Clean WM6.1 Apache ROM, are there any mirror sites to download this? I need to get the WM6.1 Apache ROM with 1.04 bootloader Thank you
PDAJ's Clean WM6.5 Titan ROM PDAJ's Clean WM6.1 Titan ROM PDAJ's Clean WM6.1 Apache ROM |
Re: PDAJ's Clean WM6.1 ROM
I'm looking too for the version for the bootloader v1.00. and would you recommend me putting WM6 even though it is on beta?, because I use it only as a PDA and not as a phone, would it work on my qwest carrier.
Edited: is the bootloader version for th WM5 or the WM6 installed? |
Re: PDAJ's Clean WM6.1 ROM
OP please reup links.
|
Re: PDAJ's Clean WM6.1 ROM
Quote:
|
Re: PDAJ's Clean WM6.1 ROM
Where is the new links cause Mediafire said it has been deleted.
|
Re: PDAJ's Clean WM6.1 ROM
Who is in charge around here?! HELP!!!!!!!!!!!!!
|
Re: PDAJ's Clean WM6.1 ROM
hi the links don`t work anymore, too bad i hope someone can fix that...
|
Re: PDAJ's Clean WM6.1 ROM
hello heeellllpppppp! the liiiinnkkkk?
|
Re: PDAJ's Clean WM6.1 ROM
Yup. Would be nice to have some live links to the ROMs.
|
Re: PDAJ's Clean WM6.1 ROM
Hello friends, I am of Brazil I have a cdma updated the apache rom of 5.0 to 6.0 and I can not enter the menu to change the number. (Previously # 778) I wonder if someone could help me. thanks
|
Re: PDAJ's Clean WM6.1 ROM
thanks
|
| All times are GMT -4. The time now is 04:43 PM. |
Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com