BigJ's NEWCORE 1.1r (RELOADED!) ROM updated: 6-16-07 - Page 5

johnny2678 · #41 (**permalink**) 06-12-2007, 10:05 AM

Hey BigJ... did you test BT PAN with the new btd.dll? I'm curious if it works upon flashing now

computercarl · #42 (**permalink**) 06-12-2007, 10:18 AM

Quote:

Originally Posted by Trident

Quote:

Originally Posted by JBabey

Quote:

Originally Posted by angel12

trident, in helmi's new kitchen the directories were all messed up too, you had to manually select your .nba from /temp and then the .nbf from upgrade, and select yes to overwrite.

this is not needed w/ my kitchen, you should be able to unrar... click build, let it finish, createrom, and then you have an NBA in the temp folder all ready BigJ style. Move that nba from the temp folder and move it to the @--- directory, run NBA 2 NBF and choose the bigj.prj file, and hit encode. You now have a flashable NBF file

ill get to the other stuff later. but if you PLEASE spend some time with it before jumping to the boards, you will figure it out, my kitchen is as simple as it can get

yes, call firewall ONLY requires NET2.... you can uncheck my hybrid, you can find the other two .NET (1 & 2) checkboxes at the bottom of the system section

Thanks... I've flashed a few ROMs, including yours and I certainly appreciate the work you put into them.
RE: the above post... does this mean that we don't have to select the Sprint .prj file and will it then have the Sprint customizations included?

Update: Rebooted computer and started clean... consistently getting the "BuildImgfs.exe has encountered a problem and needs to close. We are sorry for the inconvenience." error. Here are the details from the error message: AppName: buildimgfs.exe AppVer: 0.0.0.0 ModName: buildimgfs.exe
ModVer: 0.0.0.0 Offset: 00001f51

No nk.nba is getting created.

same error here. I'm trying to figure it out now.
*edit* It is because you have too much selected. Unselect some useless stuff, like the ringtones, extra themes, intellipoint, etc. Then try again. Here's what I found to help -- open buildos, select what you want. run it, but dont close it, just minimize it. Run createos, and if Buildimgfs explodes, exit it, and go back to buildos, unselect some stuff, and try again. Hope this helps.

Hayabusa1300cc · #43 (**permalink**) 06-12-2007, 10:53 AM

[quote="JBabey"]Register the SAFEMODE application to

Quote:

Does this ROM hang upon softreset as 1.6? or freeze aswell? I hope it will be alot more stable.

NO, this ROM does not suffer the lockups that 1.6 did on a soft-reset.

Even if it did, there is a safemode application built-into the ROM that will allow you to troubleshoot the culprit application should one arise.

YES! Thanks a lot for answering my question about the lockups! I always stayed in your ROMS but they all shared the lockup problems. This is great news

bmtbandit · #44 (**permalink**) 06-12-2007, 01:22 PM

I have downloaded the kitchen twice, and think it is corrupted. I keep getting CRC errors when I try to extract it

**Trident** · #45 (**permalink**) 06-12-2007, 02:19 PM

Quote:

Originally Posted by computercarl

Quote:

Originally Posted by Trident

Quote:

Originally Posted by JBabey

Quote:

Originally Posted by angel12

trident, in helmi's new kitchen the directories were all messed up too, you had to manually select your .nba from /temp and then the .nbf from upgrade, and select yes to overwrite.

this is not needed w/ my kitchen, you should be able to unrar... click build, let it finish, createrom, and then you have an NBA in the temp folder all ready BigJ style. Move that nba from the temp folder and move it to the @--- directory, run NBA 2 NBF and choose the bigj.prj file, and hit encode. You now have a flashable NBF file

ill get to the other stuff later. but if you PLEASE spend some time with it before jumping to the boards, you will figure it out, my kitchen is as simple as it can get

yes, call firewall ONLY requires NET2.... you can uncheck my hybrid, you can find the other two .NET (1 & 2) checkboxes at the bottom of the system section

Thanks... I've flashed a few ROMs, including yours and I certainly appreciate the work you put into them.
RE: the above post... does this mean that we don't have to select the Sprint .prj file and will it then have the Sprint customizations included?

Update: Rebooted computer and started clean... consistently getting the "BuildImgfs.exe has encountered a problem and needs to close. We are sorry for the inconvenience." error. Here are the details from the error message: AppName: buildimgfs.exe AppVer: 0.0.0.0 ModName: buildimgfs.exe
ModVer: 0.0.0.0 Offset: 00001f51

No nk.nba is getting created.

same error here. I'm trying to figure it out now.
*edit* It is because you have too much selected. Unselect some useless stuff, like the ringtones, extra themes, intellipoint, etc. Then try again. Here's what I found to help -- open buildos, select what you want. run it, but dont close it, just minimize it. Run createos, and if Buildimgfs explodes, exit it, and go back to buildos, unselect some stuff, and try again. Hope this helps.

Although I didn't get the reasoning behind why that might work, I did try various builds with different items selected.
After many attempts, I couldn't get any variation of selections to work. In most cases, I was simply deselecting a large number of items that I didn't use; selected the Sprint operator; changed the theme to standard WM6 and adding in the midlet manager and FlashPlayer. Even with not adding in the last two, I still get the same error every time.
I just ran BuildOS without deleting anything- just changed the theme and operator and same result.
Can the createOS.bat file have been corrupted?
Is it looking for something that is stored elsewhere that might not be correct?

JBabey · #46 (**permalink**) 06-12-2007, 02:22 PM

Quote:

Originally Posted by bmtbandit

I have downloaded the kitchen twice, and think it is corrupted. I keep getting CRC errors when I try to extract it

seems to work for me, maybe you got it while i was uploading it. if you still have problems lemme know and ill throw it up on a free file host as well. also make sure you have the LATEST version of winrar.... i always compile my large archives in SOLID format with MAX compression, older versions dont handle the solid format so well.

EDIT: ill reupload it rt now. dont try to download until 12:30pm PST

JBabey · #47 (**permalink**) 06-12-2007, 02:24 PM

Quote:

Originally Posted by Trident

Quote:

Originally Posted by computercarl

Quote:

Originally Posted by Trident

Quote:

Originally Posted by JBabey

Quote:

Originally Posted by angel12

trident, in helmi's new kitchen the directories were all messed up too, you had to manually select your .nba from /temp and then the .nbf from upgrade, and select yes to overwrite.

this is not needed w/ my kitchen, you should be able to unrar... click build, let it finish, createrom, and then you have an NBA in the temp folder all ready BigJ style. Move that nba from the temp folder and move it to the @--- directory, run NBA 2 NBF and choose the bigj.prj file, and hit encode. You now have a flashable NBF file

ill get to the other stuff later. but if you PLEASE spend some time with it before jumping to the boards, you will figure it out, my kitchen is as simple as it can get

yes, call firewall ONLY requires NET2.... you can uncheck my hybrid, you can find the other two .NET (1 & 2) checkboxes at the bottom of the system section

Thanks... I've flashed a few ROMs, including yours and I certainly appreciate the work you put into them.
RE: the above post... does this mean that we don't have to select the Sprint .prj file and will it then have the Sprint customizations included?

Update: Rebooted computer and started clean... consistently getting the "BuildImgfs.exe has encountered a problem and needs to close. We are sorry for the inconvenience." error. Here are the details from the error message: AppName: buildimgfs.exe AppVer: 0.0.0.0 ModName: buildimgfs.exe
ModVer: 0.0.0.0 Offset: 00001f51

No nk.nba is getting created.

same error here. I'm trying to figure it out now.
*edit* It is because you have too much selected. Unselect some useless stuff, like the ringtones, extra themes, intellipoint, etc. Then try again. Here's what I found to help -- open buildos, select what you want. run it, but dont close it, just minimize it. Run createos, and if Buildimgfs explodes, exit it, and go back to buildos, unselect some stuff, and try again. Hope this helps.

Although I didn't get the reasoning behind why that might work, I did try various builds with different items selected.
After many attempts, I couldn't get any variation of selections to work. In most cases, I was simply deselecting a large number of items that I didn't use; selected the Sprint operator; changed the theme to standard WM6 and adding in the midlet manager and FlashPlayer. Even with not adding in the last two, I still get the same error every time.
I just ran BuildOS without deleting anything- just changed the theme and operator and same result.
Can the createOS.bat file have been corrupted?
Is it looking for something that is stored elsewhere that might not be correct?

buildos.exe does NOT always remove the /temp/ folder properly, youll have to remove it manually before doing another build... it leaves "leftover" crap in there sometimes. i just ran it with your configurations and it built up just fine.

kdogg06 · #48 (**permalink**) 06-12-2007, 02:34 PM

phone doesnt vibrate any more when reciving a txt or any kind of notification ....can anyone help

dancadman · #49 (**permalink**) 06-12-2007, 02:48 PM

You need to turn the LED feature back on. Registry editor: HKLM\Drivers\BuiltIn\AllLEDMgr\ change index to 1.

**Trident** · #50 (**permalink**) 06-12-2007, 02:51 PM

There is something not right in the original download.
I deleted the entire folder and re-extracted from the original RAR.
There were two glitches. First, one of the language files asked to be copied over, seemingly indicating that there was a second copy that had just been extracted. Second, the solitaire file gives me an error that it's unavailable.
I just deleted the whole folder and am extracting to a different directory...
Running BuildOS...
COMPLETED!
Encoding worked fine.
Ready to flash!