So many old Posts Gone

[viper_iii]

Caught this in the Cache and it saved my A$$..

Instructions to revert Bootloader. (Partition Table is not the same for g3 device: 1.04, 1.02 and 1.00 have the same partition table)
Download files from link below.
ftp://anonymous@up.ppcgeeks.com/Apac...otloader2.0.4/
If you are on Vista and you havent updated the vista ruu drivers, download drivers needed and follow the instructions for vista OS from this link;
http://forum.ppcgeeks.com/showthread.php?t=7049

Download winrar from http://www.rarlab.com/download.htm (if you dont already have it)
1. Put phone in bootloader (power, notes and soft reset)
2. Disable activeSync (right-click on activeSync, select connections, and uncheck USB)
3. Connect phone to computer and run mtty.
4. select "USB" in com ports and click 'ok'.
5. Press the "enter" key on your keyboard and you will get "USB>"
6. type (do not copy and paste), "task 28 55aa" without the quotes and press "enter"
Your result should look like so:
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x3D00000
FAT1 Size: 0xA00000
FAT2 Size: 0x2C40000
All Size: 0x7440000
FAT0_ADDR=0x100000,FAT1_ADDR=0x3E00000,FAT2_ADDR=0 x4800000

7. Unplug phone and enable activeSync, then plug back in.
8. Double click on bootloaderfix.rar, password is "bootloader" without the quotes.
9. Run the upgrade utility.
10. Once complete do not reset the phone, phone should still be in bootloader, if not put phone in bootloader. check the version (should be 2.02)
11. Repeat steps 2 through 6 and your result should look like so:
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0xA00000
FAT2 Size: 0x2900000
All Size: 0x7400000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000,FAT2_ADDR=0 x4B00000

12. Repeat step 7
13. Double click on no_id ruu files.zip, password is "bootloader" without the quotes.
14. copy nk.nbf, radio.nbf and ms_.nbf from your carrier rom and place in No_ID folder.
if you dont have it already, download from http://www.utstar.com/pcd/uts_downloads.aspx
once downloaded, right click on the exe and click extract here (pay attention to where it extracts it to). There will be 2 folders in the folder u just extracted. the files are in the output files folder.
15. Run upgrade utility in the no_id folder.
16. Hard reset once done.
17. Now you can flash any rom you want.


Due to the success rate on all the devices i have reverted, I feel it is safe for you to do this as long as you follow the instructions completely.
NOTE: IT IS STILL VERY POSSIBLE TO BRICK YOUR DEVICE SO PROCEED WITH CAUTION. BOOTLOADER IS NOT THE SAME AS EXT_ROM, RADIO OR OS!!!!!!!!!!!

For devices with 1.04 bootloader, you do not need the fix cos your partition sizes are not affected, thereby remaining the same. You just need to ensure that you are using the newer ruu to flash Roms (if you really want to revert back to 1.02, that is possible also).

Thank goodness for the caches for better or worse they can be useful!

[brandogg]

Thank you!