PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Apache Development (http://forum.ppcgeeks.com/forumdisplay.php?f=53)
-   -   Helmi Apache WM6 verizonguy edition (early devel) (http://forum.ppcgeeks.com/showthread.php?t=8722)

evans 10-09-2007 09:16 AM

Squealching Feedback Weirdness ...
 
Just tried out devel4 last night - had my first incoming call this morning. At the time I was attempting to pair my BT headset (of course). The device switched off the Phone ( I was in the Comm Manager) and began "squealing" - kind of like microphone feedback from a speaker.

Not sure if anyone else has seen this - never seen such behavior before - may have just been random and will let you know if it happens again - just wanted to put it out there.

...tom

mattfenn 10-09-2007 09:31 AM

Storage Card
 
Installed Dev4 last night. I noticed this morning that after the phone shuts off the backlight and comes back on, I get the storage card not configured or needs to be inserted error. After a reset it works fine, but as soon as the backlight goes off, the problem reappears. I didn't have this issue with Dev3.

edit: forgot to add that removing and re-inserting the card does not kick start it either.

robmayer 10-09-2007 09:33 AM

Downloaded devel4 last night... very pleased so far. I don't know if it's just me or not, but this one seems a lot snappier than the last 3 developments. I really like the standardization progress in these to. I had no use for 90% of the "crap-ware" loaded in the original Apache WM6. Thanks for your hard work Verizonguy!

verizonguy 10-09-2007 10:16 AM

For those with vibrate weirdness. I just tested all vibrate combinations running devel4 and they work perfectly for me. I tried vibrate, vibrate & ring, vibrate then ring--they all work well.

flash devel4, hard reset a couple of times, reprogram with *22899 and soft reset & tell me if you're still having the same issues.

verizonguy 10-09-2007 10:17 AM

Quote:

Originally Posted by mattfenn (Post 98787)
Installed Dev4 last night. I noticed this morning that after the phone shuts off the backlight and comes back on, I get the storage card not configured or needs to be inserted error. After a reset it works fine, but as soon as the backlight goes off, the problem reappears. I didn't have this issue with Dev3.

edit: forgot to add that removing and re-inserting the card does not kick start it either.

Card info?
Brand
Size
Mini SD or Mini SDHC ?
Using adapter?

I'm not having any issues with card support so far with devel4.

verizonguy 10-09-2007 10:18 AM

Quote:

Originally Posted by evans (Post 98783)
Just tried out devel4 last night - had my first incoming call this morning. At the time I was attempting to pair my BT headset (of course). The device switched off the Phone ( I was in the Comm Manager) and began "squealing" - kind of like microphone feedback from a speaker.

Not sure if anyone else has seen this - never seen such behavior before - may have just been random and will let you know if it happens again - just wanted to put it out there.

...tom

I'm sure it has to do with the fact that you were attempting to pair at the time.

Gervy 10-09-2007 11:08 AM

Games
 
Noooo..... you got rid of Pocket-SAND!!!!!!!


NO NO NO

mattfenn 10-09-2007 01:48 PM

Quote:

Originally Posted by verizonguy (Post 98803)
Card info?
Brand
Size
Mini SD or Mini SDHC ?
Using adapter?

I'm not having any issues with card support so far with devel4.

Sandisk
512mb
Mini SD
No adapter.

Tried a hard reset, let the card load. Removed and reinserted. Seems to be working at this time. I'll play around with it and see if it continues to happen.

robmayer 10-09-2007 03:57 PM

Quote:

Originally Posted by mattfenn (Post 98787)
Installed Dev4 last night. I noticed this morning that after the phone shuts off the backlight and comes back on, I get the storage card not configured or needs to be inserted error. After a reset it works fine, but as soon as the backlight goes off, the problem reappears. I didn't have this issue with Dev3.

edit: forgot to add that removing and re-inserting the card does not kick start it either.

I am also having this problem. Soft reset solves it for a while, then the card dissapears again for some reason. I did not have this problem with devel1-3. The card is a Sandisk 1gb Mini-SD, no adapter. Maybe it has something to do with the built-in SDHC support in this build??

tharris297 10-09-2007 04:27 PM

I have no complaints at all, only words of thanks ...

But I was shocked to see the games missing, but hey ... i found cabs for the ones i play and I always install games to the SD card.

I wish I had a SDHC card to test, I guess I'll go and pick one up tonight to test. Good work verizonguy!!!


All times are GMT -4. The time now is 03:04 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0